Feasibility study for the preparation of certified reference materials part I – mineral oil contaminated soils

The international joint project HYCREF (Contract No. G6RD-CT-2002-00854), funded by the European Commission in the 5th Framework programme, aimed to develop methods to prepare homogeneous and stable reference materials of water, soil, and waste contaminated with mineral oil hydrocarbons and to certify the mineral oil content by gas chromatographic methods. The results of a feasibility study for the preparation of three soil reference materials are discussed in this paper, and for the preparation of three waste reference materials in the second part (Koch et al., Accred Qual Assur submitted for publication). The soil materials were selected to represent different soil types and contamination levels. The project plan set three requirements for these reference materials: uncertainty in the mineral oil content resulting from the certification exercise <5%, a sample inhomogeneity of <3% and a minimum long-term stability of 5 years. For the most part, these requirements were met within this project.     

ICP-AES同时测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴

采用ICP－AES法测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴元素含量，并对样品的溶解酸和酸用量、元素分析线的选择以及共存元素间的干扰进行了研究。该法简便、快速，精密度和准确度较好。     

氢化物-非色散原子荧光法测定饲料矿物添加剂中的砷

本文采用氢化物－非色散原子荧光光谱法研究了十几种饲料矿物添加剂中金属离子对砷测定的干扰，采用加入硫脲－抗坏血酸混合溶液、碘化钾分离、加热蒸干等方法消除干扰。同时本文还对测定砷的酸度、硼氢化钾浓度和仪器工作参数进行了研究和优化。方法相对标准偏差（RSD）为0．54％，检出限（D．L）为54．5ng/L，样品国．加标回收率为102．9％。实际样品测定结果与胂斑法相比具有很好的一致性。     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Enhancement of the light-scattering ability of coatings by using hollow pigments

The light-scattering properties of coatings based on monodisperse polymeric spheres of two different diameters (ca 0.5 and 1 m) were evaluated from reflectance measurements as a function of the wavelength from 400 to 700 nm. Some of these plastic pigments were hollow and it was noted that these particles gave coatings with a greater light-scattering ability than coatings based on solid particles of a similar size. It was possible to estimate the contribution of the internal pores to the scattering ability of the coating layers by saturating the layers with an oil of a refractive index similar to that of the polymeric pigment particles. A simple model accounting for the scattering provided by the internal pores of the hollow particles is suggested. The agreement between the experimental results and the prediction of the model is fair. It was noted that the light scattering coefficient of the coatings increased when the external diameter of their constituent hollow particles increased from ca 0.5 to 1 m.     

微波萃取花生壳天然黄色素及其稳定性研究

对福建产花生壳进行了微波萃取天然黄色素及其稳定性的研究 .研究表明微波萃取的工艺条件是 :以pH =3,体积分数 70 %的乙醇水溶液作提取剂 ,原料与提取剂配比为 1g∶5mL ,微波辐射功率为 12 0W ,辐射时间2 4 0s.对该色素稳定性研究结果表明 ,该色素为水溶性色素 ,属黄酮类色素 ,适用pH值范围比较宽 ,尤其碱性状态效果最佳 ,对光、热稳定性好 ,大多数食品添加剂对色素稳定性影响不大 ,对氧化剂H2 O2 的耐受能力较差 ,对还原剂Na2 SO3 的耐受能力强     

紫荆花红色素开发利用的研究

首次报道紫荆花红色素的提取纯化方法及红色素的理化性质，并与玫瑰茄红色素作对比研究，证实同属于花青甙类化合物，又经急性毒性试验证明其毒性极低，故紫荆花天然红色素具有开发利用的价值。     

New perylene polyimides containing p‐n diblocks for sensitization in TiO2 solar cells

Three novel perylene polyimides (PPIs) containing p‐n diblock units were designed and synthesized for use in dye‐sensitized mesoporous TiO₂ solar cells. They all dissolve in m‐cresol and N‐methyl‐2‐pyrrolidone (NMP). Their visible light absorption, electrochemical and photoelectrochemical properties were systematically studied. The polyimides have band gap energies of 2.16, 2.19 and 2.25 eV deduced from ultraviolet–visible absorption spectra, and electron affinity (E_a) and ionization potential (IP) of ?3.93 and 6.10 eV for PPI1, ?3.94 and 6.13 eV for PPI2, ?3.93 and 6.59 eV for PPI3, respectively, deduced from cyclic voltammogram. Experimental data show that introduction of 4,4′‐bisaminetriphenylamine cannot only greatly enhance optic‐electro conversion efficiency, but also enhance the dissolubility which in favorable for making the devices. The relationship of structure and properties of PPI is discussed and the mechanism of photocurrent generation is explained. Copyright © 2004 John Wiley & Sons, Ltd.     

Ion chromatographic determination of alkali and alkaline earth metals in mineral waters

Summary The rapid, simultaneous, suppressed ion chromatographic determination of alkali, alkaline earth metals and ammonium in highly mineralized waters has been examined using the novel cation exchange IonPac CS12 column. General ability for the determination of lithium, sodium, ammounium, potassium, magnesium, calcium and strontium in concentrations from a few g to several mg per liter was studied. The relative standard deviations of retention times of all seven cations were below 0.7% and the relative standard deviations of the measurements of peak areas and peak heights were mostly below 5%. Six natural mineral waters of different types were selected for evaluation of the method. It was not possible to determine lithium in the one run and ammonium usually partially coelutes with sodium precluding quantitative determination. Strontium was undetectable because of the necessary dilutions. All the reltionships between peak areas and concentrations or peak height and concentrations were linear and there was also no evidence of the effect of different matrices on the slope of regression lines.     

Flexibility and Rigidity of Proteins and Protein–Pigment Complexes

Proteins may be rigid or flexible to various degrees as required for optimal function. Flexibility of large parts of a protein, which rearrange or move, is particularly interesting and will be discussed in this article. We differentiate between several categories, although the boundaries between them are diffuse: flexibility of peptide segments, order–disorder transitions of spatially contiguous regions, and domain motions. The domains may be flexibly linked to allow rather unrestricted motions or the motions may be constrained to certain modes. The various categories of large-scale flexibility will be illustrated with the following examples: (1) Small protein proteinase inhibitors are rather rigid molecules which provide binding surfaces complementary to their cognate proteases but show also limited segmental flexibility and adaptation. (2) Large plasma proteinase inhibitors exhibit large conformational changes after interaction with proteases probably for regulatory purposes. (3) Pancreatic serine proteases employ a disorder–order transition of their activation domain as a means to regulate enzymic activity. (4) Immunoglobulins show rather unrestricted and also hinged domain motions in different parts of the molecule probably to allow binding to antigens in different arrangements. (5) Citrate synthase adopts open and closed forms by a hinged domain motion to bind substrates and release products and to perform the catalytic condensation reaction, respectively. (6) Riboflavin synthase, a bifunctional multienzyme complex, catalyzes two consecutive reactions by means of two subunits, α and β. The β-subunits form a shell, in which the α-subunits are enclosed. Diffusional motion of the catalytic intermediates is therefore restricted. In addition, rearrangement of the N-terminal segment occurs during the assembly of the β-subunit. In contrast, rigidity is dominant in the structures of the light-harvesting complexes and the photosynthetic reaction centers involved in photosynthetic light reactions. These are large protein–pigment complexes in which the proteins serve as matrices to hold the pigments in the appropriate conformation and relative arrangement. Since motion would contribute to deactivation of the photoexcited states of the pigments and diminish the efficiency of light-energy and electron transfer, the functional role of rigidity is easy to rationalize for these proteins.