Cr^4＋：YAG可饱和吸收特性测量

测量了Cr4+:YAG材料的可饱和吸收特性,用多种数据分析方法处理了实验结果,Cr4+:YAG的基态吸收截面σgs=11×10-19cm2,激发态吸收截面σes=1.2×10-19cm2。     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).     

基于FPGA的42英寸全色PDP存贮控制电路的实现

从等离子体平板显示器(PDP)的发光原理出发，分析和研究了存贮控制电路的工作原理，提出基于FPGA的电路设计方案，并给出数据整理电路和驱动信号产生电路的具体电路框图，最后给出部分仿真波形．     

Output dynamics and stabilisation of a multi-mode double-clad Yb-doped silica fibre laser

The intensity dynamics of the double-clad Yb fibre laser have been characterised. Stabilisation of the fibre laser intensity by using uniform bi-directional pumping is demonstrated. For the single-end-pumped Yb fibre laser, the output becomes more stable for the shorter fibre length due to the higher threshold of stimulated Brillouin scattering, SBS, and Kerr effects and the reduction of saturated absorber effects caused by any unpumped fibre section. By additional pumping in a double-end-pumped configuration, the output power can be scaled higher before detecting high intensity pulses initiated by SBS in the Yb fibre laser due to the reduction of saturable absorption effect. It is confirmed that uniform pumping enhances the stability of the laser output.     

Diode-end-pumped Nd:YAGLaser with Cr4+:YAG as Passive Q-switch

A diode-end-pumped Nd:YAG laser is passively Q-switched by using Cr4+:YAG as saturable absorber. When CW pumped with a laser diode which the maximum power is 550 mW, the laser produces pulses of 24 ns duration at 1064 nm, with an energy of 26 μJ.     

Spectral Properties and Solubilization Location of 2'-Ethylhexyl 4-(N,N-Dimethylamino)benzoate in Micelles

Dual fluorescence and UV absorption of 2'-ethylhexyl 4-(N,N-dimethylamino)benzoate (EHDMAB) were investigated in cationic, non-ionic and anionic micelles. When EHDMAB was solubilized in different micelles, the UV absorption of EHDMAB was enhanced. Twisted intramolecular charge transfer (TICT) emission with longer wavelength was observed in ionic micelles, whereas TICT emission with shorter wavelength was obtained in non-ionic micelles. In particular, dual fluorescence of EHDMAB was significantly quenched by the positively charged pyridinium ions arranged in the Stern layer of cationic micelles. UV radiation absorbed mainly decays via TICT emission and radiationless deactivation. The dimethylamino group of EHDMAB experiences different polar environments in ionic and non-ionic micelles according to the polarity dependence of TICT emission of EHDMAB in organic solvents. In terms of the molecular structures and sizes of EHDMAB and surfactants, each individual EHDMAB molecule should be buried in micelles with its dimethylamino group toward the polar head groups of different micelles and with its 2'-ethylhexyl chain toward the hydrophobic micellar core. Dynamic fluorescence quenching measurements of EHDMAB provide further support for the location of EHDMAB in different micelles.     

Quantitative Analysis of Solar Photovoltaic Panel Performance with Size-Varied Dust Pollutants Deposition Using Different Machine Learning Approaches

In this paper, the impact of dust deposition on solar photovoltaic (PV) panels was examined, using experimental and machine learning (ML) approaches for different sizes of dust pollutants. The experimental investigation was performed using five different sizes of dust pollutants with a deposition density of 33.48 g/m² on the panel surface. It has been noted that the zero-resistance current of the PV panel is reduced by up to 49.01% due to the presence of small-size particles and 15.68% for large-size (ranging from 600 µ to 850 µ). In addition, a significant reduction of nearly 40% in sunlight penetration into the PV panel surface was observed due to the deposition of a smaller size of dust pollutants compared to the larger size. Subsequently, different ML regression models, namely support vector machine (SVMR), multiple linear (MLR) and Gaussian (GR), were considered and compared to predict the output power of solar PV panels under the varied size of dust deposition. The outcomes of the ML approach showed that the SVMR algorithms provide optimal performance with MAE, MSE and R² values of 0.1589, 0.0328 and 0.9919, respectively; while GR had the worst performance. The predicted output power values are in good agreement with the experimental values, showing that the proposed ML approaches are suitable for predicting the output power in any harsh and dusty environment.     

蜂窝夹层板撞击极限方程预测能力的提升

蜂窝夹层板撞击极限方程是空间碎片撞击航天器风险评估的关键技术,目前描述其预测能力的指标主要有总体、安全预测正确率和绝对、相对误差。基于131个蜂窝夹层板的实验数据,分别描述各个预测指标在方程系数空间的变化特征,并采用层次化思路进行方程预测指标提升的探讨。结果发现,进行方程优化时,预测概率型指标可精确优化,而预测误差型指标可快速优化;总体预测正确率作为首要预测指标可优先用于研究航天器的在轨防护特性,而安全预测正确率作为首要指标则可优先用于其设计安全性。

     

金融发展对经济增长影响的实证分析

本文将金融发展作为一个独立解释变量引入,构造经济增长的面板数据模型,运用面板数据以1994年为分界点分两阶段实证分析了全国及东、中、西部地区1985~2003年金融发展对经济增长的影响,以及东、中、西部地区影响的差异性,模型较好地拟合了数据。实证分析表明,各地区之间金融发展的不平衡性可以部分解释其经济增长的差异性。     

超低频率全正色散半导体可饱和吸收镜被动锁模光纤激光器

通过延长激光器环形腔腔长,利用高浓度掺杂的单模掺镱光纤,搭建了超低重复频率、全正色散结构的半导体可饱和吸收镜被动锁模光纤激光器。激光器的中心波长、重复频率、平均功率及单脉冲能量分别为1 064 nm,281.5 kHz,11 mW和39 nJ。为了稳定中心波长,实现自启动,激光器腔体内接入了一个带通滤波器。该激光器运行稳定,无调Q不稳定现象,极大减小了半导体可饱和吸收镜被损坏的机会。