High performance liquid chromatographic separation of polar and non-polar chlorophyll pigments from algae using a wide pore polymeric octadecylsilica column

A method employing a wide pore polymeric reversed phase column has been developed for the separation of most of the chlorophylls and related compounds previously described as occurring in marine microalgae. The high selectivity toward molecular shape of this kind of stationary phase has enabled compounds of very similar structure, such as chlorophylls c₁, c₂ and Mg-divinylpheoporphyrin a₅ monomethyl ester, and chlorophyll a and the phytol-substituted chlorophyll c-like pigments, which commonly coelute on monomeric bonded phases, to be resolved in a single run. Some of these pigments, formerly thought to be a single compound, have, in fact, been demonstrated to be groups of two or more. The method has been successfully applied to both algal cultures and natural sea water samples. When visible light absorbance detection was used, the method proved suitable for separation of various carotenoids.     

Total synthesis of (±) maculalactone A, maculalactone B and maculalactone C and the determination of the absolute configuration of natural (+) maculalactone A by asymmetric synthesis

Maculalactones A, B and C from the marine cyanobacterium Kyrtuthrix maculans are amongst the only compounds based on the tribenzylbutyrolactone skeleton known in nature and (+) maculalactone A from the natural source possesses significant biological activity against various marine herbivores and marine settlers. We now report a concise synthesis of racemic maculalactone A in five steps from inexpensive starting materials. Maculalactones B and C were synthesized by a minor modification to this procedure, and the synthetic design also permitted an asymmetric synthesis of maculalactone A to be achieved in around 85% ee. The (+) and (−) enantiomers of maculalactone A were assigned, respectively, to the S and R configurations on the basis of the chiral selectivity expected for catecholborane reduction of an unsymmetrical ketone in the presence of Corey's oxazoborolidine catalyst. Surprisingly, it appeared that natural (+) maculalactone A was biosynthesized in K. maculans in a partially racemic form, comprising ca. 90-95% of the (S) enantiomer and 5-10% of its (R) enantiomer. Coincidentally therefore, the percentage enantiomeric excess of the product obtained from asymmetric synthesis almost exactly matched that found in nature.     

Purification of a marine bacterial glucose dehydrogenase fromCytophaga marinoflava and its application for measurement of 1,5-anhydro-d-glucitol

A novel glucose dehydrogenase (GDH) from a marine bacteriumCytophaga marinoflava IFO 14170 was isolated from its membrane fraction. This GDH catalyzes the oxidation of a hydroxy group of glucose, but does not react in its C-l position. This enzyme is composed of a single peptide with a mol wt of 67,000. The GDH can react under high salinity. The optimum pH is around 8.0, showing a typical property of marine bacterial enzymes. Using this novel enzyme, an enzymatic determination of 1,5-anhydro-D-glucitol (1,5AG) utilizing 2,6-dichrolophenolindophenol (DCIP) and phenazine methosulfate (PMS) as electron mediators was caried out. A good linear correlation was observed from 0.5 mM to 4 mM of 1,5AG.     

A formal total synthesis of (±)-9-isocyanoneopupukeanane

A formal total synthesis of the marine sesquiterpene (±)-9-isocyanoneopupukeanane starting from the readily available monoterpene carvone has been accomplished employing a combination of intermolecular Michael addition-intramolecular Michael addition reaction and an intramolecular rhodium carbenoid C-H insertion reaction as key steps, and identifying the isopropenyl group as a masked hydroxy group.     

Siderophore production by a marine Pseudomonas aeruginosa and its antagonistic action against phytopathogenic fungi

A marine isolate of fluorescent Pseudomonas sp. having the ability to produce the pyoverdine type of siderophores under low iron stress (up to 10 μM iron in the succinate medium) was identified as Pseudomonas aeruginosa by using BIOLOG Breathprint and siderotyping. Pyoverdine production was optimum at 0.2% (w/v) succinate, pH 6.0, in an iron-deficient medium. Studies carried out in vitro revealed that purified siderophores and Pseudomonas culture have good antifungal activity against the plant deleterious fungi, namely, Aspergillus niger, Aspergillus flavus, Aspergillus oryzae, Fusarium oxysporum, and Sclerotium rolfsii. Siderophore-based maximum inhibition was observed against A. niger. These in vitro antagonistic actions of marine Pseudomonas against phytopathogens suggest the potential of the organism to serve as a biocontrol agent.     

Optimization of the Microwave-Assisted Saponification and Extraction of Organic Pollutants from Marine Biota Using Experimental Design and Artificial Neural Networks

Several improvements in sample pretreatment for the determination of organic pollutants (i.e. n-alkanes, polycyclic aromatic hydrocarbons, PAHs) in marine biota (mussels) are presented. The use of liquid nitrogen and homogenization of the samples are shown to be an alternative to the time consuming liophilization step required for the analysis of biota samples. Microwave-assisted hydrolysis and extraction are combined to isolate organic pollutants (19 n-alkanes and 27 PAHs) from biota matrices. Experimental design (ED) and artificial neural networks (ANNs) were used to optimize the experimental conditions. NIST-CRM 2978 was used to test the validity of the developed method which shows a good agreement with certified values.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

Synthesis of the marine furanoditerpene (−)-marginatone

A synthesis of the marine labdane furanoditerpene (−)-marginatone 1 has been accomplished by a short sequence of reactions starting from (+)-coronarin E 5. The key step is the stereocontrolled-intramolecular electrophilic cyclisation of the (+)-dihydrocoronarin E 6, to the tetracyclic marginatane skeleton 7, which is subsequently functionalized by allylic oxidation to give 1. As (+)-coronarin E 5 was previously synthesized from (−)-sclareol 10, the herein reported preparation constitutes the first formal total synthesis of (−)-marginatone 1, by which its absolute configuration has been confirmed.     

Ruthenium(II) complexes with mono and ditertiary arsines and phosphines and their reaction with small molecules

Dichlorotetrakis(dimethylsulphoxide)ruthenium(II) reacts with AsPh₃ AsMePh₂, AsMe₂Ph and SbPh₃ in ethanolic hydrochloric acid solution to yield the complexes RuCl₂(DMSO)₂(AsPh₃)₂, RuCl₂(DMSO) L₂ (L = AsMePh₂, AsMe₂Ph, SbPh₃) respectively. The treatment of ruthenium(II) blue solution with AsMePh₂, AsMe₂Ph and SbPh₃ in alcohol resulted in the formation of the complexes; RuCl₂L₃ (L = AsMePh₂, AsMe₂Ph and SbPh₂), respectively. The reaction of RuCl₂(DMSO)₄ with the bidentate ligands 1,2 bis (diphenylarsino)methane (DPAM), 1,2 bis(diphenylarsino)ethane (DPAE) and 1,2 bis (diphenylphosphino)methane (DPPM). 1,2 bis(diphenylphosphino)ethane (DPPE), in ethanol gave the complexes RuCl₂(DPAM)₂, RuCl₂(DPAE)₂, RuCl₂ (DPPM)₂ RuCl₂(DPPE)₂, respectively. The complexes thus obtained undergo reaction with carbon monoxide, hydrogen, molecular nitrogen and nitric oxide to yield a variety of mixed ligand complexes.