Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg-Zn-Ca alloy

The poor corrosion resistance of magnesium alloys is a dominant problem that limits their clinical application. In order to solve this challenge, micro-arc oxidation (MAO) was used to fabricate a porous coating on magnesium alloys and then electrochemical deposition (ED) was done to fabricate rod-like nano-hydroxyapatite (RNHA) on MAO coating. The cross-section morphology of the composite coatings and its corresponding energy dispersion spectroscopy (EDS) surficial scanning map of calcium revealed that HA rods were successfully deposited into the pores. The three dimensional morphology and scanning electron microscopy (SEM) image of the composite coatings showed that the distribution of the HA rods was dense and uniform. Atomic force microscope (AFM) observation of the composite coatings showed that the diameters of HA rods varied from 95 nm to 116 nm and the root mean square roughness (RMS) of the composite coatings was about 42 nm, which were favorable for cellular survival. The bonding strength between the HA film and MAO coating increased to 12.3 MPa, almost two times higher than that of the direct electrochemical deposition coating (6.3 MPa). Compared with that of the substrate, the corrosion potential of Mg-Zn-Ca alloy with composite coatings increased by 161 mV and its corrosion current density decreased from 3.36 × 10⁻⁴ A/cm² to 2.40 × 10⁻⁷ A/cm² which was due to the enhancement of bonding strength and the deposition of RNHA in the MAO pores. Immersion tests were carried out at 36.5 ± 0.5 °C in simulated body fluid (SBF). It was found that RNHA can induce the rapid precipitation of calcium orthophosphates in comparison with conventional HA coatings. Thus magnesium alloy coated with the composite coatings is a promising candidate as biodegradable bone implants.     

Solvent effects in the polymerization of propylene catalyzed by octahedral complexes

The effect of solvents (toluene, dichloromethane, and hexane) was studied on the polymerization of propylene with the octahedral complexes bis(trimethylsilyl)benzamidinate titanium dichloride(a), bis(acetylacetonate) titanium dichloride(b), and bis(diethylamino) titanium di‐2‐(diphenylphosphanylamino)pyridine as catalytic precursors and methylalumoxane as the cocatalyst. For comparison, the polymerization was also performed in plain liquid propylene without the addition of any solvent. The obtained polymers were fractionated by refluxing hexane. The activity of the complexes and the molecular weights and tacticities of the whole polymers and their different fractions were the studied parameters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4505–4516, 2005     

Highly Selective Diphoshinoamine/Cr(III) Catalysts for Ethylene Tetramerization

Ethylene trimerization has been attracted much attention because of their high selectivity towards 1-hexene1-6. The common belief is that ethylene tetramerization is improbable. This is because if ethylene tetramerization proceeds via the same mechanism o…     

Cross-linked gelatin/nanoparticles composite coating on micro-arc oxidation film for corrosion and drug release

A composite coating which could control drug release and biocorrosion of magnesium alloy stent materials WE42 was prepared. This composite coating was fabricated on the surface of the micro-arc oxidation (MAO) film of the magnesium alloy, WE42, by mixing different degrees of cross-linked gelatin with well-dispersed poly(dl-lactide-co-glycolide) (PLGA) nanoparticles. The PLGA nanoparticles were prepared by emulsion solvent evaporation/extraction technique. Nano ZS laser diffraction particle size analyzer detected that the size of the nanoparticles to be 150-300 nm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) was used to analyze the morphology of the nanoparticles and the composite coating. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were used to evaluate the corrosion behavior of the composite coating. Drug release was determined by ultraviolet-visible (UV-vis) spectrophotometer. The corrosion resistance of the composite coating was improved by preventing the corrosive ions from diffusing to the MAO films. The drug release rate of paclitaxel (PTX) exhibited a nearly linear sustained-release profile with no significant burst releases.     

Addition-type polynorbornene with Si(CH3)3 side groups: Detailed study of gas permeation and thermodynamic properties

Polymerization of norbornene bearing Si(CH₃)₃ groups in the five position with the opening of double bonds was performed. By accurate selection of the ratios catalyst/co-catalyst and monomer/catalyst the samples with increased molecular mass (about 400,000) were obtained. Transport parameters of this, addition type poly(trimethylsilyl norbornene) (PTMSN) were measured using the gas chromatographic and mass spectrometric methods for different gases (H₂, He, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈ and n-C₄H₁₀). Temperature dependence of the permeability coefficients (P) indicated that low activation energies of permeation (E_P) and diffusion (E_D) are characteristic for PTMSN. In some cases (CO₂, C₂H₆) negative E_P values were observed. Thermodynamics of vapor sorption in this polymer was studied using the inverse gas chromatography method. It was shown that PTMSN is characterized by very large solubility coefficients S similar to those of poly(trimethylsilyl propyne) (PTMSP). The comparison of the P, D, and S values of these highly permeable polymers showed that the greater permeability of PTMSP is determined by the larger D values. Application of different approaches for the determination of the size of microcavities in PTMSN indicated that this polymer is characterized by large size of microcavity (800–1200 ?³).     

Unexpected Kinetics in the Polymerization of Ethene by Cp$\rm{ {_{2}^{{\ast}}}}$ZrCl2/MAO

A sterically hindered metallocene catalyst, Cp ZrCl₂ activated with methylaluminoxane (MAO), is found to polymerize ethene at temperatures up to 60° with a good propagation rate constant but low number of active sites, and with negligible β‐hydride elimination or β‐hydride transfer to monomer. Moreover, transmetalation to Al is found to be effectively irreversible for alkyl groups larger than Me. With the major mechanisms for chain transfer and termination suppressed, one might expect a living polymerization. The bulk polymerization of ethene was indeed found to be quasi‐living even when performed at well above room temperature, and furthermore provided rate constants which agreed remarkably well with those from the mass‐spectrometric study.     

新型五甲基茂基三苄氧基钛/甲基铝氧烷催化剂合成苯乙烯-乙烯共聚物及其表征

以五甲基茂基三苄氧基钛［Ｃｐ＊ Ｔｉ（ＯＢｚ）３］ 和甲基铝氧烷（ ＭＡＯ） 组成的催化体用本体法合成出苯乙烯 乙烯共聚物Ｐｏｌｙ（Ｓ ｃｏ Ｅ） ．考察了共聚温度,共聚时间,Ａｌ／Ｔｉ 摩尔比,主催化剂浓度［Ｔｉ］ 等条件对共聚反应的影响．共聚产物经沸丁酮,沸四氢呋喃（ＴＨＦ） 连续抽提分离,发现共聚物主要存在于ＴＨＦ 可溶级分中．可溶级分经ＤＳＣ,１３Ｃ ＮＭＲ,ＷＡＸＤ,ＤＭＡ 等手段分析,证明苯乙烯 乙烯共聚物为具有单一玻璃化转变温度（ Ｔｇ） 无熔融温度的无规共聚物,显示弹性体的粘弹性行为．