Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

高温超导体Josephson阵列在磁场中的微波响应与磁通涡旋激发

本文从分析相变电阻率 ρP 和磁通蠕动电阻率 ρF 出发 ,指出当T小于某一温度T0 时 ,ρF>ρP,而当T >T0 时 ,ρF 远小于 ρP,并进一步分析了 ρF 与 ρP 随温度的变化率分布图 ,得出磁通蠕动电阻率 ρF 随温度的变化率分布图跟微波响应曲线具有相似的分布特征 ,结果表明 :高温超导体的非平衡微波响应机制可能与磁通涡旋的激发有关 .     

Soluble,saturated‐red‐light‐emitting poly(p‐phenylenevinylene) containing triphenylamine units and cyano groups

A conjugated poly(p‐CN‐phenylenevinylene) (PCNPV) containing both electron‐donating triphenylamine units and electron‐withdrawing cyano groups was prepared via Knoevenagel condensation in a good yield. Gel permeation chromatography suggested that the soluble polymer had a very high weight‐average molecular weight of 309,000. A bright and saturated red emission was observed under UV excitation in solution and film. Cyclic voltammetry showed that the polymer presented quasi‐reversible oxidation with a relatively low potential because of the triphenylamine unit. A single‐layer indium tin oxide/PCNPV/Mg–Ag device emitted a bright red light (633 nm). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3947–3953, 2004     

White and Red Organic Light Emitting Materials

Derivatives of 2,3-(1,4-dialkoxyaceno)norbornadiene underwent ring-opening metathesis polymerization (ROMP) upon the catalysis of a ruthenium complex to afford the corresponding polymers. The polymeric materials containing anthracene chromophores emit white electro-luminescence, which can be fabricated into light-emitting diodes (LED). The broad emission band is composed of a blue emission from anthracene and a red emission from aggregates. A single layer device, ITO/polymer/Ca/Al, can be turned on at 7V and exhibits maximum intensity 427 cd/m2 at 15 V. A double layer device, ITO/polymer/TPBI/Mg:Ag (TPBI = (2,2′,2"-(1,3,5-benzenetriyl)-tris(1-phenyl-1H-benzimidazole)) displayed blue light with turn-on voltage 6 V and maximal intensity 930 cd/m2 at 15 V.Derivatives of bisindolylmaleimide were found to form amorphous solid films which exhibit intensive red luminescence. The property of forming glasses can be ascribed to the nonplanar geometry of these molecules. LED devices were fabricated by a layer of pure dye sandwiched between two charge transporting films. The yellow emission spectrum of the devices utilizing Alq (tris(8-hydoxyquinolinato)aluminum) contains a green component from Alq. Pure red emissions can be achieved by replacing Alq with TPBI. Typical devices can be turned on at ～3 V with maximal intensity 2000 cd/m2. White color devices are under current investigation, in which the green Alq layer is replaced by its blue derivative (bis(2-methyl-8-hydoxyquinolinato)(phenolato)aluminum).     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

640 × 512 pixel narrow-band, four-band, and broad-band quantum well infrared photodetector focal plane arrays

A 9 μm cutoff 640 × 512 pixel hand-held quantum well infrared photodetector (QWIP) camera has been demonstrated with excellent imagery. A noise equivalent differential temperature (NEDT) of 10.6 mK is expected at a 65 K operating temperature with f/2 optics at a 300 K background. This focal plane array has shown background limited performance at a 72 K operating temperature with the same optics and background conditions. In this paper, we discuss the development of this very sensitive long-wavelength infrared camera based on a GaAs/AlGaAs QWIP focal plane array and its performance in quantum efficiency, NEDT, uniformity, and operability. In the second section of this paper, we discuss the first demonstration of a monolithic spatially separated four-band 640 × 512 pixel QWIP focal plane array and its performance. The four spectral bands cover 4–5.5, 8.5–10, 10–12, and 13.5–15 μm spectral regions with 640 × 128 pixels in each band. In the last section, we discuss the array performance of a 640 × 512 pixel broad-band (10–16 μm full-width at half-maximum) QWIP focal plane.     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

GaAs／AlGaAs发光二极管列阵场分布特性的电光测量

应用一种新颖的无损伤测量技术－连续波电光检测法（ＣＷＥＯＰ）对ＧａＡｓ／ＧａＡｌＡｓ单异质结发光管列阵电场分布进行了扫描测量。实验结果反映了器件内电流注入的方向和载流子扩展情况；通过比较各单元电场分布，反映器件发光均匀性。文中详细介绍了测量原理、实验装置和实验结果及讨论，最后用计算机对电场分布作了模拟计算并与实验结果进行了对照。     

Alternating copolyfluorenevinyles with polynuclear aromatic moieties: Synthesis,photophysics, and electroluminescence

Three new copolymers, namely poly(fluorenevinylene‐alt‐naphthalenevinylene) ( N ), poly(fluorenevinylene‐alt‐anthracenevinylene) ( A ) and poly(fluorenevinylene‐alt‐pyrenevinylene) ( P ), were synthesized by Heck coupling of 9,9‐dihexyl‐2, 7‐divinylfluorene with a polynuclear aromatic dibromide. The 9,10‐disubstituted anthracene was obtained exclusively for A while N and P were obtained as a mixture of two isomers with predominant the 1,4‐disubstituted naphthalene and 1,8‐disubstituted pyrene, respectively. The polymers were soluble in common organic solvents and decomposed above 370 °C. Their glass transition temperature increased from 58 to 110 °C by increasing the number of the phenyl rings of the polynuclear aromatic moiety. Rather high‐efficiency blue and blue‐greenish photoluminescence (PL) of these copolymers in solution was largely decreased in their films, indicating the presence of concentration quenching in the solid state. The OLED using these polymers demonstrated green EL in the case of copolymers N and A , and red EL in the P derivative with η_EL = 0.26–0.31%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4661–4670, 2007