Electrical and magnetic properties of CoFeAlO thin films

Influences of oxygen-partial pressure and annealing on the electrical and magnetic properties of CoFeAlO thin films were systematically investigated by means of resistivity, permeability, magnetization and ferromagnetic resonance (FMR) measurements. It was found that, with increasing oxygen-partial pressure or under annealing, the electrical resistivity of the film increased and the magnetic softness decreased, which is attributed to the microstructural change of the film. Interestingly, an as-deposited Co_45.30Fe_20.65Al_19.34O_14.71 film was found to exhibit an inverted hysteresis loop with negative coercivity, and this peculiar phenomenon disappeared upon effects of oxygen-partial pressure and annealing. It was also found that the as-deposited films owned a narrow FMR line width that increased with increasing oxygen-partial pressure or under annealing.     

Angle and speed distributions of hydrogen desorbing thermally from metal surfaces

On the basis of the theory developed in a previous paper (Part I), the angle and speed distributions of D₂ molecules desorbing thermally from the Ni(111) surface are numerically calculated in the present paper (Part II). The dynamical motion of the activated complex of the recombinative desorption process is calculated by using a model potential surface, which involves a few parameters introduced to describe the necessary features of the potential surface at the transition state. Numerical calculations are carried out, and the results show that the present dynamical theory reproduces very well a variety of the characteristic features of the experimental results, e.g., sharply focused angular distribution, mean translational energy lower than 2k _B T at grazing angle, and the non-Maxwellian profile of the TOF distribution.     

Back to the future: Polarised positron beams

Plans for the development of a polarised mono-energetic positron beam at the University of Bath are described. Pilot measurements with the existing beam, modified only by increasing the source-moderator separation, have demonstrated that the helicity of the present beam is sufficient to show sensitivity to ferromagnetism in bulk iron. However, an increase in flux and helicity is required if the beam is to be successfully used to probe magnetic structures of current technological interest, and strategies to achieve both are described. Potential applications in magnetic semiconductor structures and magnetic nanoparticles are discussed.     

Hydrogen dissociation on metal surfaces – a model system for reactions on surfaces

Received: 23 March 1998/Accepted: 21 August 1998     

Dust Particle Properties in a Dual-Frequency Driven Sheath

We study characteristics of a single dust particle in a duai-frequency capacitively coupled plasma sheath, such as charging and suspending processes, using a collisionless self-consistent model. Also, the movement of the dust grain with time is investigated for the various radii and initial velocities. The numerical results show that, after several microseconds, the charging process of the dust particle reaches equilibrium, and the grain obtains its equilibrium position, In addition, it is found that the parameters of the low-frequency source impact on the charging and suspending processes of the dust grain significantly.     

Anisotropy dispersion in (CoCrPt)1−x(SiO2)x perpendicular recording media

The distribution of easy axis orientation in perpendicular media is of technological importance because it affects the value of S^* (see Fig. 1), which quantifies the switching field distribution (SFD) and hence partially determines the data density achievable on a given medium. The distribution is controlled by the crystallographic orientation of grains and factors such as intergranular exchange and dipolar coupling. Due to strong demagnetising fields in the perpendicular orientation, traditional measurements of remanence as a function of angle are difficult to interpret and have required the use of large-scale computational models. In this work we have utilised the variation of coercivity H_C with angle, which has the advantage that at H_C the global demagnetising field is zero. Additionally, since such materials follow essentially the Stoner–Wohlfarth mode of reversal, the variation of H_C with angle, H_C(θ), is much greater than that for the remanence. We find that for (CoCrPt)_1−x(SiO₂)_x, where the level of exchange coupling is controlled, the distribution of magnetic easy axes is narrower when the exchange coupling is reduced, but dipolar coupling between the grains is strong and affects the magnetisation reversal significantly.     

Concept of the field-driven domain wall motion memory

In this paper, the concept of field-driven domain wall motion memory is presented. It is confirmed that a domain is shifted with a carefully designed non-uniform field by micromagnetic simulations. The shift of a domain—a bit—can be established by the motion of two domain walls to the same direction and the same distance. In order to get a better understanding of the domain wall motion under the non-uniform transverse magnetic field, we investigate the motion of the transverse Néel-type domain wall by micromagnetic simulations and the collective coordinate approach. The validity of the equation of motion for the domain wall is confirmed by the micromagnetic simulations as functions of the gradient of the non-uniform field, the saturation magnetization, and the Gilbert damping parameter α.     

Bias voltage dependence of inverted magnetoresistance on the annealing temperature in MgO-based magnetic tunnel junctions

MgO-based magnetic tunnel junctions (MTJs) with a layer sequence Ir₂₂Mn₇₈ or Fe₅₀Mn₅₀ (10 nm)/CoFe (2 nm)/Ru (0.85 nm)/CoFeB (0.5?t<2 nm)/MgO (2.5 nm)/CoFeB (3 nm) have been fabricated. The bias voltage dependence of tunneling magnetoresistance (TMR) is given as a function of the annealing temperature for these MTJs, which shows the TMR ratio changes its sign from inverted to normal at a critical bias voltage (V_C) when an unbalanced synthetic antiferromagnetic stack CoFe/Ru/CoFeB is used. V_Cs change with the thickness of the pinned CoFeB and annealing temperature, which implies one can achieve different V_Cs by artificial control. The asymmetric V_C values suggest that a strong density-of-states modification occurs at bottom oxide/ferromagnet interface.     

Hydrogenase-based nanomaterials as anode electrode catalyst in polymer electrolyte fuel cells

We consider hydrogenase-based nanomaterials for possible use as anode electrode catalysts in polymer electrolyte fuel cells (PEFCs). We choose Fe-only hydrogenase component of Desulfovibrio desulfuricans (DdHase) as a hydrogenase complex, and investigate its catalytic activity for H₂ dissociation using ab initio calculations based on density functional theory (DFT). We found two possible H-H bond cleavage pathways, which are heterolytic and possess low activation barriers. Moreover, the H₂ dissociation can be promoted by inducing spin polarization of the H₂ adduct. We report that hydrogenase or hydrogenase-based nanomaterials can manipulate to exhibit the catalytic activity equivalent to the well-known platinum catalyst.