Negative compressibility property in hinging open-cell Kelvin structure

A new three-dimensional(3 D) cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property. It is shown that this model has adjustable compressibility and does exhibit negative compressibility for some certain conformations. And further study shows that the images of compressibility are symmetrical about the certain lines, which indicates that the mechanical properties of the model in the three axial directions are interchangeable and the model itself has a certain geometric symmetry. A comparison of the Kelvin model with its anisotropic form with the dodecahedron model shows that the Kelvin model has stronger negative compressibility property in all three directions.Therefore, a new and potential method to improve negative compressibility property can be derived by selecting the system type with lower symmetry and increasing the number of geometric parameters.     

Study of adsorption of oxygen on β-Al2O3 + Au and β-Al2O3 + Pt: Work function measurements—proposition of a model

To improve the understanding of the electrochemical effects observed on an original potentiometric gas sensor, interactions of oxygen with the device were investigated. This gas sensor is made of a solid electrolyte (treated Na-β-alumina) associated with two metallic electrodes (gold and platinum) located in the same gas mixture. Adsorption of charged oxygen species, considered responsible for the electrical response developed by the sensor, was investigated by work function measurements. Results showed that charged oxygen species only form on partially gold or platinum covered solid electrolyte. Comparison of these results with those obtained in a previous calorimetric study of interactions between oxygen and the same materials suggests the existence of at least two different oxygen species adsorbed on the surface of the sensitive element. The first one, located on the solid electrolyte surface, is neutral and characterized by an endothermal reaction of formation. The second one is charged and probably produced at the gas/solid electrolyte/metallic electrode interface. A mechanism based on the concept of “three phase boundary” and similar to the “reverse spillover” phenomenon is proposed to account for the adsorption of these oxygen species.     

On linear and nonlinear Rossby waves in an ocean

This paper deals with recent developments of linear and nonlinear Rossby waves in an ocean. Included are also linear Poincaré, Rossby, and Kelvin waves in an ocean. The dispersion diagrams for Poincaré, Kelvin and Rossby waves are presented. Special attention is given to the nonlinear Rossby waves on a β-plane ocean. Based on the perturbation analysis, it is shown that the nonlinear evolution equation for the wave amplitude satisfies a modified nonlinear Schrödinger equation. The solution of this equation represents solitary waves in a dispersive medium. In other words, the envelope of the amplitude of the waves has a soliton structure and these envelope solitons propagate with the group velocity of the Rossby waves. Finally, a nonlinear analytical model is presented for long Rossby waves in a meridional channel with weak shear. A new nonlinear wave equation for the amplitude of large Rossby waves is derived in a region where fluid flows over the recirculation core. It is shown that the governing amplitude equations for the inner and outer zones are both KdV type, where weak nonlinearity is balanced by weak dispersion. In the inner zone, the nonlinear amplitude equation has a new term proportional to the 3/2 power of the difference between the wave amplitude and the critical amplitude, and this term occurs to account for a nonlinearity due to the flow over the vortex core. The solution of the amplitude equations with the linear shear flow represents the solitary waves. The present study deals with the lowest mode (n=1) analysis. An extension of the higher modes (n?2) of this work will be made in a subsequent paper.     

Complex point sources in probe-corrected cylindrical near-field scanning

A probe-corrected theory based on complex point sources is presented for computing the acoustic field of an arbitrary finite source from measurements of the near field on a cylindrical scanning surface. The complex point sources are used both as basis functions for the expansion of the field outside the scan cylinder and for the representation of the probe. The resulting probe-corrected formulas are considerably simpler than the standard probe-corrected formulas based on cylindrical waves. The new formulation makes simulations of near-field scanning systems much less computationally intensive than simulations based on standard theory. The complex point-source theory is validated through numerical examples involving a baffled circular piston transducer probe.     

Characterization of heat-assisted magnetic probe recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2–7 V were applied to a CoNi/Pt multilayered film fabricated on either bare silicon or oxidized silicon substrates. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm on the film fabricated on bare silicon substrate when the pulse voltage is above a threshold voltage. The mark size becomes 260 nm when they are written on the identical film fabricated on an oxidized silicon substrate. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. A synthesized model, which contains the calculation of the emission current, the simulation of heat transfer during heating, and the study of magnetic domain formation, was introduced to explain experimental results. The simulation agrees well with the experiments.     

钢中Si、Mn的电子探针定量分析与标样

采用特制的Fe-Si、Fe-Mn合金系列标样，用电子探针测定了钢或铁基合金中低含量的Si和Mn元素、与用纯元素作标样、经ZAF修正的结果相比较，提高了分析准确度．     

Development of aryl-containing dipyrrolyldiketone difluoroboron complexes (BONEPYs): Tune the hydrogen bond o–CH···F for fluoride recognition

Dipyrrolyldiketone difluoroboron complexes (BONEPYs) were synthesized by condensation of the corresponding pyrroles and malonyl chloride followed by treatment with BF₃·OEt₂. The aryl-substituted pyrrole is introduced to form a cyclic system in order to investigate anion binding studies. In BONEPYs 1–3 the o-H of the aryl group forms hydrogen bonding with F⁻ to give a more table complex. In contrast, the intramolecular hydrogen-bonded BONEPY endo-4 is more stable than its exo isomer. While adding F⁻, the hydrogen bonds must be broken first to give 4·(3)F⁻. Owing to the electron-rich group (-OMe), the o-H of the phenyl group can hardly interact with F⁻ via hydrogen bonding to give the less stable complex 4·(5)F⁻. The energy differences between the different conformations were calculated using DFT methods, which is consistent to the experimental observations.     

In vitro study of experimental factors affecting the microdialysis results

The aim of the present study was to determine the influence of a series of experimental conditions (probe, perfusate flow rate and the method used to ascertain recovery) as well as the pharmacokinetic variables (concentration and time) on the estimation of the recovery coefficient of microdialysis probes. Two in vitro pharmacokinetic assays were also carried out to compare the results provided by microdialysis and those obtained with traditional sampling. The probes used were made in our laboratory and ciprofloxacin was used as a model compound. The results revealed that in all cases recovery was dependent on the probe and independent of time for a 80 min sampling time period. The effects of concentration on recovery depend on the flow rate; this was not statistically significant for a flow rate of 2 μl/min but an increase in flow rate to 6 μl/min transformed this parameter into a concentration-dependent variable. A decrease in recovery parallel to the increase in flow rate was found, with an exponential relationship between the two variables. Statistically significant differences were also found between the recovery values obtained for direct dialysis (18.44±1.61) and retrodialysis by loss of the analyte of interest (16.79±3.42). The values of the protein binding of ciprofloxacin as calculated by equilibrium dialysis and by microdialysis were similar. Characterization of the in vitro kinetic profile revealed no statistically significant differences for coefficients and exponents obtained by traditional sampling and microdialysis, although the confidence intervals of the curves were wider for microdialysis.     

Fluorescence Probe Studies of Ionic Micelles in Concentrated Salt Solutions

We have investigated the effect of salt concentration and temperature on the average aggregation number and micro-polarity of the interior of micelles of sodium dodecyl sulfate (SDS). sodium tetradecyl sulfate (STDS) and lithium dodecyl sulfate (LiDS). The transient fluorescence decay of micelle-solubilized pyrene has been measured and analyzed. An exponent weighted average aggregation number <n>_e was obtained by this technique. For SDS and STDS in NaCl solution, <n>_e increases as the temperature is lowered or salt concentration is increased <n>_e increased from ～ 50 to ～ 250 over [NaCl] = 0 to 0.8 M. Due to the strong counterion binding of lithium in the micellar solution, the LiDS micelle is much, smaller and does not increase appreciabily even at [LiCl] =0.8 M. From the fluorescence spectrum fine structure of pyrene and the fluorescence decay of the monomer and excimer, we can understand the local polarity and the water penetration to the interior of the micelle upon addition of salts and with changing temperature. The interior of the micelle becomes more nonpolar as the salt concentration is increased and the temperature is lowered. A complete kinetic analysis of the time–dependence of the fluorescence is given. The kinetic analysis is in agreement with the results reached by fluorescence spectral analysis.     

A novel fluorescent method for determination of peroxynitrite using folic acid as a probe

A novel method for the determination of peroxynitrite using folic acid as a fluorescent probe is described. The method is based on the oxidation of the reduced, low-fluorescent folic acid by peroxynitrite to produce a high-fluorescent emission product. The fluorescence increase is linearly related to the concentration of peroxynitrite in the range of 3 × 10⁻⁸ to 5.0 × 10⁻⁶ mol L⁻¹ with a correlation coefficient of 0.998, and the detection limit is 1 × 10⁻⁸ mol L⁻¹. Interferences from some metal ions normally seen in biological samples, and also some anions structurally similar to peroxynitrite were studied. The optimal conditions for the detection of peroxynitrite were evaluated.