Approximation of photonuclear interaction cross-sections

Photonuclear interaction cross-sections from the GEANT4 database are approximated for all nuclei and all energies (from the hadron production threshold to about 40 TeV). The approximation methods in the giant-dipole resonance region, nucleon resonance region, and high-energy region are improved with respect to existing approximations. As an application of the approximation for photonuclear cross-sections, an improved method of calculating electronuclear cross-sections is developed. The interaction cross-section of virtual photons with nuclei at high Q² are approximated and a simple algorithm for describing the electronuclear reactions, including high-Q² scattering, is proposed. Received: 22 February 2002 / Accepted: 6 May 2002     

The effect of microwave annealing on the electrical characteristics of lanthanum doped bismuth titanate films obtained by the polymeric precursor method

Lanthanum doped bismuth titanate thin films (Bi_3.25La_0.75Ti₃O₁₂ - BLT) were produced by the polymeric precursor method and crystallized in a domestic microwave oven and in conventional furnace. Using platinum coated silicon substrates configuration, ferroelectric properties of the films were determined with remanent polarization P_r and a coercive field E_c of 3.9 μC/cm² and 70 kV/cm for the film annealed in the microwave oven and 20 μC/cm² and 52 kV/cm for the film annealed in conventional furnace, respectively. The films annealed in conventional furnace exhibited excellent retention-free characteristics at low infant periods indicating that BLT thin films can be a promise material for use in non-volatile memories. On the other hand, the pinning of domains wall causes a strong decay at low infant periods for the films annealed in the microwave furnace which makes undesireable the application for future FeRAMS memories.     

Self-similar vortex reconnection

As shown by Crow in 1970, the evolution of two almost parallel vortex filaments with opposite circulation exhibits a long-wave instability. Ultimately, the symmetric mode increases its amplitude reconnecting both filaments and ending into the formation of an almost periodic structure of vortex rings. This is a universal process, which appears in a wide range of scales: from the vortex trails behind an airplane to a microscopic scale of superfluids and Bose–Einstein condensates. In this paper, I will focus on the vortex reconnection for the latter case by employing Gross–Pitaevskii theory. Essentially, I focus on the well-known laws of interaction and motion of vortex filaments. By means of numerical simulations, as well as theoretically, I show that a self-similar finite-time dynamics manifests near the reconnection time. A self-similar profile is selected showing excellent agreement with numerical simulations.     

A miniaturized detector for high-resolution SEMPA

The basics of the scanning electron microscope with polarization analysis are briefly reviewed, emphasizing the achievable magnetic resolution and image contrast. The design of an optimized spin-polarization detector based on the well-established LEED scattering principle is presented. Results of first tests are reported. Received: 2 September 2002 / Accepted: 2 September 2002 / Published online: 5 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-40/42838-6368, E-mail: RFroemte@PHYSnet.Uni-Hamburg.de     

On the organization of self-assembled actin networks in giant vesicles

We studied the formation of actin scaffolds in giant vesicles of dimyristoylphosphatidylcholine (DMPC). Polymerization of actin was induced at low ionic strength through ionophore-mediated influx of Mg²⁺ (2 mM). The spatial organization of the filamentous actin was visualized by confocal and epifluorescence microscopy as a function of the filaments length and membrane composition, by including various amounts of cholesterol or lipids with neutral and positively charged polyethyleneglycol headgroups (PEG lipopolymers). In vesicles of pure DMPC, the newly polymerized actin adsorbs to the membrane and forms a thin shell. In the presence of 2.5 mol% lipopolymers or of cholesterol at a molar fraction x = 0.37, formation of a thin adsorbed film is impeded. A fuzzy cortex is predominantly formed in vesicles of diameter d smaller than the filament persistence length ( d ⩽ 15μm) while for larger vesicles a homogeneous network formation is favoured in the bulk of the vesicle. The fuzzy-cortex formation is interpreted as a consequence of the reduction of the bending energy if the actin filaments accumulate close to the vesicle wall. Received: 17 January 2002 / Accepted: 21 March 2003 / Published online: 24 April 2003 RID="a" ID="a"e-mail: Laurent_Limozin@ph.tum.de     

Electromagnetic cavity to explore disordered systems

In the course of characterizing an electromagnetic cavity we have come to understand details of transmission and reflection traces, some of which may be useful as tools to investigate local modes in random media. We have demonstrated quantitative agreement of frequency shift observations with theory, have demonstrated that the spatial distribution of electric and magnetic fields can be measured using insulating and conducting spheres, and have used perturbation due to wires and disks to demonstrate the local direction of electric and magnetic fields. We have observed that not only frequency shifts but also spatial shifts of modes can be used to observe the intensity of interaction of modes with extended objects in the cavity.     

Measurement and modeling of diffraction from an edge of a thin panel

The diffraction of sound from an edge of a thin chipboard panel was measured in an anechoic chamber, and compared to simulations based on the diffraction formulation developed by Svensson et al. [Svensson UP, Fred RI, Vanderkooy J. An analytic secondary source model of edge diffraction impulse responses. J Acoust Soc Am 1999;106(5):2331-44]. The measurements and simulations were performed for a line of receiver positions below the panel to include cases for which the direct sound had an unobstructed propagation path to the receivers, as well as cases for which the direct sound was occluded by the panel. Comparison of the measured and simulated responses is provided in both the time and frequency-domains, and shows that the differences between them are small over the entire audible frequency range. This case study verifies that the applied diffraction-modeling method gives accurate results, and that the assumptions of ideal source and wedge characteristics inherent in the method do not preclude its use in simulations of realistic scenarios.     

High Pressure effects on electrical resistivity and dielectric properties of nanocrystalline SnO2

Nanocrystalline tin oxide (SnO₂) was prepared by chemical precipitation method with different grain sizes. The X-ray diffraction studies showed the structural stability of nanocrystalline SnO₂ under high-pressure. Electrical and dielectric properties were studied on these samples using complex impedance spectroscopy under different hydrostatic pressures. Electrical resistivity and dielectric studies showed a transition in nanocrystalline SnO₂ when it was subjected to high-pressure. The transition pressures obtained from both the resistivity and dielectric measurements agree with each other. The transition pressures were found to increase considerably with the decrease in grain size. Dielectric constant was found to decrease with the reduction of grain size. In order to find whether the transition with pressure is structure- related or not, Raman spectroscopy was done at normal temperature and pressure (NTP) and as a function of pressure at room temperature. Raman modes at NTP showed lines which correspond to tetragonal rutile structure of SnO₂. In situ high-pressure Raman measurements were carried out up to 3.38 GPa. No structural change was found with pressure.     

Luus-Jaakola optimization procedure for multilayer optical coatings

Designing multilayer optical coatings is a difficult optimization problem because of the huge size of the search space. In the present paper, the Luus-Jaakola (LJ) optimization procedure, a new optimization algorithm, is employed to model multilayer optical coatings in the X-ray domain. With this algorithm it is not necessary to specify initially the number of layers present in a design. Only an upper limit needs to be defined. The algorithm has been used to maximize the reflectivity over a range of incident angles at a fixed wavelength, and over a wavelength range at a fixed incident angle. The results show that the LJ algorithm can be effectively applied to the design of multilayer optical coatings resulting in fewer layers than obtained using alternative optimization methods.     

Solution synthesis of ZnO nanotubes via a template-free hydrothermal route

ZnO nanotubes were successfully synthesized by a simple template-free hydrothermal method. X-ray powder diffraction and transmission electron microscopy were used to characterize the as-prepared ZnO nanotubes. The average size of the nanotubes is 200-500 nm in length and 20-30 nm in diameter. In addition, a further investigation of the optimized synthetic conditions has been carried out.