Photodegradation of polypropylene thermal bonded non-woven fabric

Samples of thermal bonded polypropylene non-woven fabrics were exposed to light from two TUV 30W G30T8 Philips lamps (λ = 253.7 nm) in a covered open-air chamber at room temperature (25 °C and 55% relative humidity) for different periods of time. In order to determine the state of degradation, the samples were examined by optical microscopy, scanning electron microscopy, staining with an isopropanol solution of methylene blue and Sudan III, colourimetry, Fourier transform infrared (FTIR) spectroscopy and density measurements. Although the bonded areas formed under complex thermal and mechanical deformations during the fabric production, no localized staining was observed. The colour of the irradiated and stained fabrics changed uniformly due to the even production of polar groups in the process of irradiation. It was found that the change of redness and blueness of degraded and stained samples can be correlated linearly with the evolution of POOH groups as determined by FTIR spectroscopy. Products containing carbonyl (CO), hydroxyl and/or hydroperoxide (POOH) groups increase with time of degradation with a non-linear relation. It was also observed that the density and 997 cm⁻¹/972 cm⁻¹ FTIR absorbance ratio increases with degradation time. Density fluctuation and the build up of degradation products caused fibre cracks and embrittlement.     

柄型金属有机化合物(V)——锗桥连茚基及取代茚基锆化合物的合成及催化烯烃聚合

锗桥连茚及取代茚配体相继与丁基锂及ＺｒＣｌ４作用,生成锗桥连茚基及取代茚基锆化合物Ｍｅ２Ｇｅ(２－Ｒ１－４－Ｒ２－Ｉｎｄ)２ＺｒＣｌ２[Ｒ１＝Ｒ２＝Ｈ(１);Ｒ１＝Ｍｅ,Ｒ２＝Ｈ(２);Ｒ１＝Ｍｅ,Ｒ２＝Ｐｈ(３)]．化合物１－３均为内消旋和外消旋异构体的混合物,通过多次重结晶得到化合物１和２的纯外消旋异构体及化合物３的内消旋异构体．由元素分析和１Ｈ ＮＭＲ谱表征了化合物的分子结构．研究了在甲基铝氧烷(ＭＡＯ)的助催化下,化合物１－３对乙烯和丙烯聚合的催化性能．由锗桥连茚基化合物１－３得到的聚乙烯的分子量分布比一般茂金属催化剂略宽．内消旋和外消旋异构体的混合物(３)由于两个催化活性中心不等同而使得到的聚乙烯的分子量分布相当宽．外消旋异构体１和２催化丙烯聚合得到高等规聚丙烯．     

A model for thermal degradation of hybrid nanocomposites

A model is developed for thermal degradation of polymer nanocomposites. A composite is thought of as an equivalent network of linear chains with attached side-groups. Thermal degradation is treated as combination of (i) binary scission (fragmentation) of backbone chains, and (ii) detachment of side-groups and their subsequent annihilation (diffusion to the surface of a sample and desorption). An explicit solution is derived for the kinetic equation. This solution involves three adjustable parameters that are found by fitting observations on isotactic polypropylene reinforced with carbon nanofibres. Good agreement is demonstrated between the experimental data and the results of numerical simulation.     

TEXTURE AND CRYSTALLINITY EVOLUTION IN ISOTACTIC POLYPROPYLENE INDUCED BY ROLLING AND THEIR INFLUENCE ON MECHANICAL PROPERTIES

The orientation and crystallinity evolution of isotactic polypropylene （iPP） induced by rolling were studied using wide angle X-ray scattering with an area detector. The tensile mechanical properties of rolled isotactic polypropylene sheets were also measured in this work. The texture component method was used to analyze the rolling texture. The rolling texture consists mainly of （010）[001], （130）[001] and [001]//RD fiber components in the sample with a rolling true strain of 1.5. The results reveal that crystallinity drastically decreases during rolling. It is suggested that amorphization is a deformation mechanism which takes place as an alternative to crystallographic intralamellar slip depending on the orientation of the lamellae. Both the orientation and crystallinity affect the tensile mechanical properties of rolled polypropylene. Crystallinity influences the elastic modulus on both directions and yield strength on transverse direction at the first stage of deformation. Orientation is the main reason for the changes of mechanical properties, especially at the latter part of deformation. The changes of both tensile strength and elongation percentage on rolling direction are larger than those on transverse direction, which results from the orientation. At last, the anisotropic mechanical properties occur on the rolling and transverse direction： high tensile strength with low elongation percentage on rolling direction and low tensile strength with high elongation percentage on transverse direction.     

Synthesis of polypropylene block copolymers from brominated styrene-terminated isotactic polypropylene

Isotactic polypropylene block copolymers, isotactic-polypropylene-block-poly (methyl methacrylate) (i-PP-b-PMMA) and isotactic-polypropylene-block-polystyrene (i-PP-b-PS), were prepared by atom transfer radical polymerization (ATRP) using a brominated styrene-terminated isotactic polypropylene macroinitiator synthesized from bromination of styrene-terminated isotactic polypropylene. The styrene-terminated isotactic polypropylene can be obtained by polymerization of propylene in the presence of styrene and hydrogen chain transfer agents using a rac-Me₂Si[2-methyl-4-(1-naphyl)Ind]₂ZrCl₂ as catalyst. The molecular weights of isotactic polypropylene block copolymers were controlled by altering the amount of hydrogen used in the polymerization of propylene and the amount of monomer used in the blocking reaction. The effect of i-PP-b-PS block copolymer on PP-PS blends and that of i-PP-b-PMMA block copolymer on PP-PMMA blends were studied by scanning electron microscopy.     

聚甲基丙烯酸甲酯辐射裂解和消旋的空间立构效应

本文研究了三种不同空间立构聚甲基丙烯酸甲酯的辐射效应,提出裂解过程是一种裂解与重合的动态平衡过程。分子量降低和消旋作用对温度的依赖性,是由于分子运动和笼罩效应以及重合的空间位阻效应所致。辐照温度愈高,裂解产额愈大。相同条件下辐照,全同立构比无规立构试样的裂解产额更大。 全同立构聚甲基丙烯酸甲酯辐照后,不仅分子链断裂,而且空间立构也发生很大变化。随着辐照剂量的增加,全同立构含量逐渐减少,而无规立构含量和间同立构含量却逐渐增加。     

Investigation of Structural Processes During Indentation of Polymers by Synchrotron Radiation Microdiffraction

Abstract

A Vickers microindentation setup has been integrated into the scanning setup used at the European Synchrotron Radiation Facility (ESRF) microfocus beamline (ID 13). Ex situ wide‐angle x‐ray scattering experiments performed on an isotactic polypropylene (iPP) single fiber show changes in chain orientation and breakup of the monoclinic α‐modification into domains due to plastic deformation in the indented zone. The systematic mapping of the perturbed zone allows spatially dependant structural changes to be determined. Similar experiments for a Vectra single fiber show a partial transformation of the pseudohexagonal phase into the orthorhombic phase. In situ experiments allow following structural changes as a function of time and applied force. During indentation of an iPP fiber, domain doubling during indentation and single domain recovery after the tip has been retracted is observed.     

The Effect of Some Physical Factors on the II → I Phase Transition of Isotactic Polybutene-1

Abstract

Isotactic polybutene-1 exhibits excellent physical, mechanical and chemical properties dependent on its most important polymorphic crystal forms, called forms I, II and III. The most stable form, form I, is generated via a slow, solid-state transformation of the tetragonal, kinetically favored form II. The slow transformation rate of form II to I, accompanied by sample shrinkage, attains its maximum at ca 25?°C and takes 7–10?days, which is a technical problem for iPB-1 practical applications. We describe here the results reported in the literature by the authors and others of the effect of various physical factors that affect the transformation rate, with the goal of determining means of accelerating it; it is noted explanations of the effects are limited and in many cases, not given.     

Synthesis of a New Liquid Crystalline Polymer as a Highly Active β-Nucleator and Its Effect on Melting and Crystallization Behaviors of Isotactic Polypropylene

A new nematic liquid crystalline polymer as a highly active β-nucleator (LCP-N) of isotactic polypropylene (iPP) was synthesized and characterized. The effect of LCP-N on thermal behavior of the iPP was investigated with differential scanning calorimetry. LCP-N showed a melting transition at 85.0°C and a nematic to isotropic phase transition at 278.0°C. The incorporation of LCP-N could lead to substantial changes in the thermal behavior of the iPP. The nucleating activity of LCP-N mainly depended on its content, mesogenic molecular structure, and thermal history of processing. A high content of β-form could be obtained by the combined effect of the optimum LCP-N concentration and crystallization temperature and time. The Φ_β reached 77% when the LCP-N content, crystallization temperature, and crystallization time were 0.4 wt.%, 125°C, and 1 h, respectively.     

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY（METHYL METHACRYLATE）

Aggregation process of isotactic poly(methyl methacrylate) (i-PMMA) has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95$±0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.