A new semiconducting organic-inorganic nanocomposite, 1,5-diaminonphthalene-saponite intercalation compound

We synthesized a new intercalation compound, 1,5-diaminonaphathalene(DAN)-saponite where intercalated DAN molecules were shown to have a formal charge of +0.67 The measurement of optical diffuse reflectance spectra revealed the formation of electronic bands with a gap of ca. 1 eV suggesting semiconducting behaviour of this system. From ESR measurements, the radical formation in DAN-saponite was confirmed and the spin concentration was determined to be 1 spin per 200 and 300 DAN-molecules at 290 and 7.9 K, respectively. This temperature dependence of the spin density also implies the semiconductive nature of DAN-saponite.     

Structures and syntheses of layered and framework amine-bearing uranyl phosphate and uranyl arsenates

Two hydrated uranyl arsenates and a uranyl phosphate were synthesized by hydrothermal methods in the presence of amine structure-directing agents and their structures determined: (N₂C₆H₁₄)[(UO₂)(AsO₄)]₂(H₂O)₃, DabcoUAs, {NH(C₂H₅)₃}[(UO₂)₂(AsO₄)(AsO₃OH)], TriethUAs, and (N₂C₄H₁₂)(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂, PiperUP. Intensity data were collected at room temperature using MoKα X-radiation and a CCD-based area detector. The crystal structures were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (DabcoUAs, TriethUAs, PiperUP) wR₂=5.6%, 8.3%, 7.2% for all data, and R₁=2.9%, 3.3%, 4.0%, calculated for 1777, 5822, 9119 unique observed reflections (|F_o|?4σ_F), respectively. DabcoUAs is monoclinic, space group C2/m, Z=2, a=18.581(1), b=7.1897(4), c=7.1909(4) Å, β=102.886(1)°, V=936.43(9) Å³, D_calc=3.50 g/cm³. TriethUAs is monoclinic, space group P2₁/n, Z=4, a=9.6359(4), b=18.4678(7), c=10.0708(4) Å, β=92.282(1)°, V=1790.7(1) Å³, D_calc=3.41 g/cm³. PiperUP is monoclinic, space group Pn, Z=2, a=9.3278(4), b=15.5529(7), c=9.6474(5) Å, β=93.266(1)°, V=1397.3(1) Å³, D_calc=4.41 g/cm³. The structure of DabcoUAs contains the autunite-type sheet formed by the sharing of vertices between uranyl square bipyramids and arsenate tetrahedra. The triethylenediammonium cations are located in the interlayer along with two H₂O groups and are disordered. Both TriethUAs and PiperUP contain sheets formed of uranyl pentagonal bipyramids and tetrahedra (arsenate and phosphate, respectively) with the uranophane sheet-anion topology. In TriethUAs, triethlyammonium cations are located in the interlayer. In PiperUP, the sheets are connected by a uranyl pentagonal bipyramid that shares corners with phosphate tetrahedra of adjacent sheets, resulting in a framework with piperazinium cations and H₂O groups in the cavities of the structure.     

Preparation and rheological characterization of poly(n-butyl methacrylate)/montmorillonite composites

Intercalated nanocomposites constituted of poly(butyl methacrylate) (PBMA) as the matrix and an organically modified montmorillonite as the nanosize filler were prepared and rheologically characterized in detail. The rheological behavior of the composites showed dependence on both temperature and clay content. For composites of low clay contents, the steady shear viscosity showed a Newtonian plateau in the low shear rate region at low temperatures and the plateau was replaced by a shear-thinning curve when the temperature was raised. For composites of higher clay contents, strong shear-thinning behavior were observed at all shear rates and all temperatures. The viscoelastic data of the composites showed unusual terminal behavior of a decreasing terminal slope at low frequencies with increasing temperature and clay loading. X-ray diffraction spectra showed that annealing process at higher temperatures shifted the Bragg reflection peaks to a lower angle and broadened the peaks, which provided the evidence for the existence of a temperature-induced solid-like structure that was responsible for the shear thinning and the unusual terminal viscoelastic behavior.     

The intercalation of cetyltrimethylammonium cations into muscovite by a two-step process: II. The intercalation of cetyltrimethylammonium cations into Li-muscovite

The alkylammonium cations were successively intercalated into the interlayer of muscovite. It was achieved by inorganic-organic ion exchange in the hydrothermal reaction of the LiNO₃-treated muscovite with cetyltrimethylammonium bromide solution. One-dimensional Patterson plots and electron density calculations show that hydrated Li⁺ and CTA⁺ cations entered the interlayer of muscovite successively. The CTA⁺-intercalated muscovite was characterized by powder X-ray diffraction and elemental analysis, in conjunction with FTIR, nuclear magnetic resonance, X-ray photoelectron spectra, high-resolution transmission electron microscopy, etc. The experiments show that organo-muscovite composite with ordered structure has been obtained. The CTA⁺ headgroups are distributed in the interlayer uniformly. However, the arrangement and conformation of CTA⁺ chains are strongly dependent upon the reaction temperature. At lower reaction temperature, the chains of CTA⁺ ions adopt a little more disordered arrangement and have higher gauche/trans conformer ratio, resulting in the disturbance to the interlayer symmetry. Whereas at higher reaction temperature, the sample with paraffin-like arrangement of CTA⁺ chains could be obtained, in which the methylene chains of CTA⁺ adopt a fully stretched, all-trans conformation.     

水相锌二次电池正极材料V2O5/C的电化学性能研究

采用溶胶－凝胶法合成了一种V₂O₅/C复合材料.扫描电镜（SEM）和红外光谱（FTIR）分析表明,这是一种外层V₂O₅胶体包覆内层乙炔分子的多孔复合材料.以V₂O₅/C作正极,锌片为负极,Zn(ClO₄)₂溶液为电解质组成水相锌二次电池,采用循环伏安（CV）和电化学阻抗谱（EIS）等方法研究发现:V₂O₅:C质量比为1:1时电极具有最好的电化学性能,电池开路电压达1.64 V; Zn^2＋能分别在1.01 V和1.26 V处分步嵌入V₂O₅/C结构中A、B两种位置,其嵌入电流密度峰值最高可达70 mA•g^－1,并且具有较好的循环充放电性能;在一定放电深度下,V₂O₅/C电极反应速率受Zn^2＋的扩散过程控制.     

Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides

trans-RhCl(CO)(TPPTS)₂ (TPPTS=tris(m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and ³¹P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS)₂ was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS)₂ is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.     

Sugar-anionic clay composite materials: intercalation of pentoses in layered double hydroxide

The intercalation of non-ionized guest pentoses (ribose and 2-deoxyribose) into the Mg-Al and Zn-Al layered double hydroxides (LDHs) was carried out at 298 K by the calcination-rehydration reaction using the Mg-Al and Zn-Al oxide precursors calcined at 773 K. The resulting solid products reconstructed the LDH structure with incorporating pentoses, and the maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 20 times that by the Zn-Al oxide precursor. The ribose/Mg-Al LDH was observed to have the expanded LDH structure with a broad (003) spacing of 0.85 nm. As the thickness of the LDH hydroxide basal layer is 0.48 nm, the interlayer distance of the ribose/Mg-Al LDH is 0.37 nm. This value corresponds to molecular size of ribose in thickness (0.36 nm), supporting that ribose is horizontally oriented in the interlayer space of LDH. The maximum amount of ribose intercalated by the Mg-Al oxide precursor was approximately 5 times that of 2-deoxyribose. Ribose is substituted only by the hydroxyl group at C-2 position for 2-deoxyribose. Therefore, the number of hydroxyl group of sugar is essentially important for the intercalation of sugar molecule into the LDH, suggesting that the intercalation behavior of sugar for the LDH was greatly influenced by hydrogen bond between hydroxyl group of the intercalated pentose and the LDH hydroxide basal layers.     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).     

Synthesis, Characterization and Catalysis of New Pillared Anionic Clays by [GaW_(11)O_(39)M(H_2O)]~(7-)(M=Mn~(2 ),Co~(2 ) or Ni~(2 ))

ＩｎｔｒｏｄｕｃｔｉｏｎＡｎｉｏｎｉｃｃｌａｙｓ（ｌａｙｅｒｅｄｄｏｕｂｌｅｈｙｄｒｏｘｉｄｅｓ）ａｒｅｉｍｐｏｒｔａｎｔｌａｙｅｒｅｄｍａｔｅｒｉａｌｓ．Ｔｈｅｇｅｎｅｒａｌｆｏｒｍｕｌａｉｓ［Ｍ２＋（１－ｘ）Ｍｘ３＋（ＯＨ）２］ｘ＋Ａｎ－ｘ／ｎｍ...     

Graphite intercalation compounds with large fluoroanions

Over the past 20 years, a number of relatively large, perfluorinated anions have been found to intercalate into graphite. This review will describe the background, some syntheses and structures of these graphite intercalations compounds (GIC's). The fluoroanion intercalates include perfluoroalkylimides, perfluoroalkylsulfonates, and perfluoroalkylborate esters. Synthetic methods can include either chemical oxidation, for example using K₂MnF₆ in anhydrous or hydrous hydrofluoric acids or electrochemical oxidation. These gallery structures present in these GIC's are larger and more complex than for most previously-known GIC's, and therefore may be important in advancing the known chemistry of graphite. In this review, the relationship of intercalate packing, orientation and conformation is discussed.