Fluorescence properties of riboflavin-functionalized mesoporous silica SBA-15 and riboflavin solutions in presence of different metal and organic cations

Riboflavin was covalently linked to mesoporous SBA-15 silica surface via grafting technique. Then fluorescence properties of the system obtained were analyzed in the presence of several metal and organic cations. Both quenching and strengthening of fluorescence as well as significant changes in the maximum fluorescence wavelength were observed. The results were compared with absorption and fluorescence data obtained for riboflavin water solutions.     

Global fit analysis including the ν9 + ν4 − ν4 hot band of ethane: Evidence of an interaction with the ν12 fundamental

The ν₉ fundamental band of ethane occurs in the 12 μm region. It is the strongest band of ethane in a terrestrial window and is commonly used for the identification of ethane in the Jovian planets. The ν₉ + ν₄ − ν₄ band occurs in the same region; neither can be analysed as an isolated band, since both are embedded in the torsional bath of the ground vibrational state. We report here two global fit models including data from both of these bands as well as the ν₃ fundamental and the ν₄, 2ν₄ − ν₄, and 3ν₄ torsional transitions. The first is restricted to −5 ? KΔK ? 15 in the hot band and gives an excellent fit to the included data. Three resonant interactions are identified in this fit—a Coriolis interaction with two resonant cases between the ν₉ torsional stack and that of the ground vibrational state (gs) and a resonant Fermi interaction between the ν₃ fundamental and the gs. Hot band lines with KΔK < −5 are influenced by a fourth perturbation, with a crossing at −11 < KΔK < −10, which has been attributed to an interaction with the ν₁₂ fundamental. A second fit, demonstrating a promising treatment of this interaction, is also presented.     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

FT-IR study on solvent effects in building blocks of bioactive compounds. V

3-Hydroxy-4-hydroxymethyl pyrrolidin-2-ones, easily prepared from the Baylis–Hillman adduct 1-ethyl-4-methyl-2-hydroxy-3-methylenebutanedioate, are useful intermediates in the synthesis of bioactive compounds. In order to understand the mechanism involved in this reaction, vibrational and Montecarlo molecular mechanics conformational analysis on 1-ethyl-4-methyl-2-hydroxy-3-methylenebutanedioate were carried out, confirming the existence of a low energy intramolecular H-bonded five-member ring.     

Volumetric and infrared measurements on amorphous ice structure

We have simultaneously used adsorption isotherm volumetry and Fourier transform infrared spectroscopy in order to take the investigations on amorphous ice structure a step further, especially concerning porosity and annealing-induced modifications. We have studied surface reorganization during annealing and found that the number of surface sites decreases before crystallization, their relative ratios being different for amorphous and crystalline ice. We also present results confirming that ice can have a large specific surface area and nevertheless be non-microporous.     

Resonance method for IR sensing

A highly sensitive method for infrared radiation detection based on thermal resonance in an active bolometer is set forth. An active bolometer is a self-oscillating system consisting of an IR-sensitive cell in a feedback circuit of an adjustable proportional controller. The analysis of an active bolometer autonomous (dark) dynamics reveals that with a generalized gain factor A variation the system evolves from relaxation type towards oscillating and self-oscillating type. When A=A_c, where A_c is a critical value of the generalized gain factor A, the steady state loses stability through self-excited thermal oscillations. The resonance in a system weakly perturbed by IR radiation modulated at self-oscillation frequency q₀[1+exp(iω_ct)] is considered. It is shown that in a small precritical vicinity =(A−A_c)/A_c of the gain factor the amplitude of forced thermal oscillations is proportional to q₀/A_c. The D^* calculation reveals that the detection power of a passive (A=0) bolometer increases with feedback introduction by a factor of 1/||. The detection powers of feasible versions of an active bolometer are compared.     

Heat-treatment studies of molybdenum oxide-monohydrate

The dehydration of molybdic acid, MoO₃---H₂O, was studied by thermal analysis, X-ray diffractometry and FTIR spectroscopy. The results show that an intermediate phase, MoO₃-2/3H₂O is formed at 216 °C and the monoclinic form of MoO₃ is grown above 350 °C. The mechanism of dehydration and structural rearrangement were confirmed by the features of the infrared spectra showing formation of corner-shared MoO₆ octahedra.     

Fourier transform spectroscopy of CH3OH: rotation-torsion-vibration structure for the CH3-rocking and OH-bending modes

High-resolution Fourier transform spectra of CH₃OH have been investigated in the infrared region from 930 to 1450 cm⁻¹ in order to map the torsion-rotation energy manifolds associated with the ν₇ in-plane CH₃ rock, the ν₁₁ out-of-plane CH₃ rock, and the ν₆ OH bend. Upper-state term values have been determined from the assigned spectral subbands, and have been fitted to power-series expansions to obtain substate origins and effective B-values for the three modes. The substate origins have been grouped into related families according to systematic trends observed in the torsion-vibration energy map, but there are substantial differences from the traditional torsional patterns. There appears to be significant torsion-mediated spectral mixing, and a variety of “forbidden” torsional combination subbands with |Δυ_t|>1 have been observed, where υ_t denotes the torsional quantum number (equivalent to υ₁₂). For example, coupling of the (υ₆,υ_t)=(1,0) OH bend to nearby torsionally excited (υ₇,υ_t)=(1,1) CH₃-rock and (υ₈,υ_t)=(1,1) CO-stretch states introduces (υ₆,υ_t)=(1,0)←(0,1) subbands into the spectrum and makes the ν₇+ν₁₂−ν₁₂ torsional hot band stronger than the ν₇ fundamental. The results suggest a picture of strong coupling among the OH-bending, CH₃-rocking, and CO-stretching modes that significantly modifies the traditional energy structure and raises interesting and provocative questions about the torsion-vibration identity of a number of the observed states.     

Intercomparison of retrieval codes used for the analysis of high-resolution, ground-based FTIR measurements

A rigorous and systematic intercomparison of codes used for the retrieval of trace gas profiles from high-resolution ground-based solar absorption FTIR measurements is presented for the first time. Spectra were analyzed with the two widely used independent, retrieval codes: SFIT2 and PROFFIT9. Vertical profiles of O₃, HNO₃, HDO, and N₂O were derived from the same set of typical observed spectra. Analysis of O₃ was improved by using updated line parameters. It is shown that profiles and total column amounts are in excellent agreement, when similar constraints are applied, and that the resolution kernel matrices are also consistent. Owing to the limited altitude resolution of ground-based observations, the impact of the constraints on the solution is not negligible. It is shown that the results are also compatible for independently chosen constraints. Perspectives for refined constraints are discussed. It can be concluded that the error budget introduced by the radiative transfer code and the retrieval algorithm on total columns deduced from high-resolution ground-based solar FTIR spectra is below 1%.     

Unsaturated bond existing in tetrafluoroethylene-propylene-vinylidene fluoride terpolymer

Infrared and nuclear magnetic resonance (NMR) spectroscopies have been applied for quantitative comparison on unsaturated bonds in tetrafluoroethylene (TFE)-propylene (P)-vinylidene fluoride (VdF) terpolymers. These spectroscopies have led to consistent results while they are based on completely different principles. It is shown that the absolute concentration can be evaluated from NMR measurements. The behavior of unsaturation has been discussed in terms of after-treatment such as wet and dry treatments. The result obtained here can give the important information to improve the performance of fluoroelastomer based on TFE-P-VdF terpolymers.