碱土金属与DBC-偶氮氯膦配位反应及配合物结构的研究

本文研究了DBC-偶氮氯膦在不同酸度下的存在形式、质子化情况及反应中的质子释放情况, 测定了钙、锶、钡与其形成的配合物的稳定常数。利用红外、激光Raman、核磁共振光谱等对所生成的配合物的结构进行了研究, 并根据实验结果和分子结构的几咱理论, 提出了碱土金属与其生成的配合物的结构。本文还就配位反应和配合物的成键情况进行了讨论。     

微乳液的热力学性质 I: 芳烃类的侧链链长对微乳液热力学函数影响

本文研究以非离子型表面活性剂-正辛醇-水-芳烃类所组成的微乳液, 探讨醇从油相转移到界面相时的自由能变化, 以及温度对自由能的影响。计算出熵和焓的变化, 发现在实验范围内, 上述热力学函数的对数值与芳烃侧链的碳原子数(n)呈线性关系。这些关系式对微乳液的构成和稳定性的讨论是重要的, 还对几种芳烃异构体所构成的微乳液的热力学函数进行了实验和讨论。     

Huckel-hubbard相关图

Huckel模型和Heisnberg-Dirac模型考虑了两种不同的相互作用,前者为单电子作用,而后者仅考虑了电子相关作用,它们是 Hubbard 模型的两种极限情形.本文以四轨道四电子体系为例讨论了三种模型,所得到的Huckel-Hubbard相关图展示了它们的适用范围及其相互关系,这样处理具有代表性,可以推广到较大的共轭体系.     

Interfacial modification for controlling silica–polysiloxane interactions and bonding in some elastomeric composites

Silica reinforcing fillers were generated using the sol-gel approach and their surfaces were modified using either a vinyl alkoxysilane (to provide permanent bonding to a host poly(dimethylsiloxane) elastomer), or a hemiacetal ester (to provide bonding that could be thermally ruptured). The surface areas of the fillers were measured by nitrogen absorption, and their morphologies, interfacial structures, and crosslinking to the elastomer were characterized by ultra small angle and small angle X-ray scattering, scanning electron microcopy, and Fourier-transform infrared spectroscopy. Increasing the amount of the silane coupling agent decreased silica domain sizes, with corresponding increases in surface area and stronger filler-polymer interactions. Vinyltrimethoxysilane had a larger effect than vinylmethyldimethoxysilane. The tensile moduli, tensile strengths, and degrees of toughness of the composites were determined using stress-strain measurements in elongation, both under near-equilibrium conditions and under continuous extension. The permanently bonded modifications gave composites with improved mechanical properties. Rupturing the hemiacetal ester bonding at 120-150°C gave some increase in ultimate stress, maximum elongation, and toughness, thus underscoring the importance of interactions or 'networking' between filler particles.     

Organic–inorganic polymer hybrids prepared by the sol-gel method

This review focuses on some aspects of organic-inorganic hybrid materials prepared by the sol-gel method. This field has been studied worldwide as one of the nanotechnologies, and is now of current interest for both organic and inorganic scientists. The elaboration of organic–inorganic polymer hybrid materials using the sol-gel process can be accomplished by various approaches. The simplest method is increasing the compatibility by using physical interactions, covalent bonding and compatibilizer between organic polymer and silica gel. Other novel approaches, such as an in-situ method, NHSG (Non- Hydrolysis Sol-Gel) process, and use of reactive polymer hybrids resulted in the preparation of novel transparent organic–inorganic polymer hybrid materials. Stimulus responsive polymer hybrids are also mentioned. Furthermore, nano-structured organic–inorganic polymer hybrids are created by using supermolecular and self-assembly of organic molecules or polymers recently. The obtained nano-structured hybrid materials showed unique properties that could not be found in amorphous hybrid materials. The possibilities and applications of organic–inorganic polymer hybrid materials are also described in this review.     

Effect of curing temperature,fibre loading and bonding agent on the equilibrium swelling of isora-natural rubber composites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre–rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V_τ ) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber–fibre interactions.     

A way of constructing translation network operators by Bernstein operators

In the present paper,we provide a way of constructing translation network operators by Bernstein-Durrmeyer operators.     

聚醚型非离子表面活性剂的混合表面膜III, 环氧乙烷一环氧丙烷嵌段共聚物, 聚丙二醇与十六醇, 硬脂酸的二元混合物

本文进一步研究了环氧乙烷-环氧丙烷嵌段共聚物(L61和F68)、聚丙二醇(PPG)分别与十六醇(CA)、硬脂酸(SA)所形成的二元混合膜。根据对π-α实验结果的分析, 表明PPG-CA、PPG-SA、F68-SA和L61-SA的混合单分子膜是不相混溶的, 而L61-CA和F68-CA的混合单分子膜则是混溶的。     

以非离子型表面活性剂组成的W/O型微乳液的渗滤现象

通过电导现象研究以非离子型表面活性剂AEO~9、正己醇、煤油和水所组成的W/O型微乳液的微观结构。从渗滤作用来比较EMT、EMTDD和BW三种理论, 发现在水油比较低的情况下, 本体系符合EMT理论。这表明微乳液在电场下是独立球体, 不随电解质浓度和性质而变。还从研究不同温度下的电导而求得活化能, 发现为负值, 从中讨论了离子跃迁规律。