The visible and ultraviolet organic light-emitting diodes with germanium dioxide as facile solution-processed anode buffer layer

Germanium dioxide (GeO₂) aqueous solutions are facilely prepared and the corresponding anode buffer layers (ABLs) with solution process are demonstrated. Atomic force microscopy, X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy measurements show that solution-processed GeO₂ behaves superior film morphology and enhanced work function. Using GeO₂ as ABL of organic light-emitting diodes (OLEDs), the visible device with tris(8-hydroxy-quinolinato)aluminium as emitter gives maximum luminous efficiency of 6.5 cd/A and power efficiency of 3.5 lm/W, the ultraviolet device with 3-(4-biphenyl)-4-phenyl-5-tert-butylphenyl-1,2,4-triazole as emitter exhibits short-wavelength emission with peak of 376 nm, full-width at half-maximum of 42 nm, maximum radiance of 3.36 mW/cm² and external quantum efficiency of 1.5%. The performances are almost comparable to the counterparts with poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) as ABL. The current, impedance, phase and capacitance as a function of voltage characteristics elucidate that the GeO₂ ABL formed from appropriate concentration of GeO₂ aqueous solution favors hole injection enhancement and accordingly promoting device performance.     

Investigation of the effect of CdCl2 processing on vacuum deposited CdS/CdTe thin film solar cells by DLTS

Thin film CdS/CdTe solar cells have been prepared by conventional vacuum deposition technique. Deep level transient spectroscopy (DLTS), temperature and frequency dependent capacitance-voltage (C-V) measurements were utilised to investigate the performance limiting defect states in the CdTe layer subjected to the post deposition treatments such as CdCl₂-dipping and/or annealing in air. Five hole traps, all of which have been previously reported in the literature, were identified in as-grown CdTe at 0.19, 0.20, 0.22, 0.30 and 0.40 eV above the valence band. A single hole trap level has been evidenced at 0.45 eV after both post deposition heat and CdCl₂ treatments.     

A perylenedicarboxamide linker for DNA hairpins

The synthesis and properties of a perylenediamide diol linker and several DNA hairpins possessing this linker are described. The diol linker absorbs and fluoresces strongly in the visible. Hairpins having poly(dA)-poly(dT) stems have fluorescence quantum yields and decay times similar to those of the linker, indicating that hole injection does not occur from the singlet excited linker into the base pair domain. Fluorescence quenching by dG or dZ bases is observed when these bases are located near the linker. The strong distance dependence of fluorescence quenching is consistent with a superexchange mechanism for electron transfer. Failure to observe formation of the linker anion radical by means of femtosecond time resolved absorption spectroscopy is attributed to fast charge recombination. The properties and behavior of the perylene linker and its hairpins are compared to those of other arenedicarboxamide linkers.     

Hole-transporting [3,3′]bicarbazolyl-based polymers and well-defined model compounds

Polymers containing bicarbazolyl moieties in the main chain have been synthesized by the modified Ullmann coupling reaction from 9H,9′H-[3,3′]bicarbazolyl and different dihalo derivatives. The number-average molecular weights of the polymers synthesized were in the range of 2500-6200 with a molecular weight distribution of 1.6-3.1. Well-defined model compounds for the polymers have been synthesized by stepwise reactions. All these compounds have been found to form glasses with glass transition temperatures in the range of 57-119 °C as characterised by differential scanning calorimetry. The electron photoemission spectra of the compounds have been recorded and the ionisation potentials of 5.35-5.4 eV have been established. Room temperature hole drift mobility of the synthesized compounds molecularly dispersed in a polymer host range from 10⁻⁶ to 3 × 10⁻⁵ cm²/V s at an electric field of 10⁶ V/cm at the room temperature.     

Hole/Electron Transporting Materials for Nonfullerene Organic Solar Cells

Nonfullerene acceptor based organic solar cells (NF-OSCs) have witnessed rapid progress over the past few years owing to the intensive research efforts on novel electron donor and nonfullerene acceptor (NFA) materials, interfacial engineering, and device processing techniques. Interfacial layers including electron transporting layers (ETL) and hole transporting layers (HTLs) are crucially important in the OSCs for facilitating electron and hole extraction from the photoactive blend to the respective electrodes. In this review, the lates progress in both ETLs and HTLs for the currently prevailing NF-OSCs are discussed, in which the ETLs are summarized from the categories of metal oxides, metal chelates, non-conjugated electrolytes and conjugated electrolytes, and the HTLs are summarized from the categories of inorganic and organic materials. In addition, some bifunctional interlayer materials served as both ETLs and HTLs are also introduced. Finally, the prospects of ETL/HTL materials for NF-OSCs are provided.     

反式钙钛矿电池超薄空穴传输层研究进展

空穴传输层(HTLs)厚度对反式钙钛矿太阳能电池(PSCs)性能具有重大影响,因其显著影响太阳光透过和HTLs的空穴传输性能。几个纳米至十几个纳米厚度的超薄HTLs在减少伴生吸收、电荷传输损失和材料消耗等方面具有明显优势。目前,有许多成熟的制备超薄无机HTLs的方法,并在反式和叠层PSCs中得到广泛研究与应用。最近,一些关于有机超薄HTLs的新型制备方法也展现出良好的性能并逐渐引起相关领域研究者关注。在此,本文主要总结反式PSCs中超薄HTLs的研究进展与应用,关注其未来发展的挑战和方向,为该领域进一步的研究提供参考。     

Photocatalytic reduction of nitrate over TiO2 and Ag-modified TiO2

This research work presents the efficiency of the TiO₂ and Ag–TiO₂ thin films prepared by the sol–gel method and coated onto the surface of 304 stainless steel sheets used in the photocatalytic nitrate reduction processes. The Ag–TiO₂ thin films had the weight by weight (w/w) ratio of Ag⁺/TiO₂ of 0.1% as Ag atom. The XRD results showed that the crystalline phase structure of TiO₂ on the Ag–TiO₂ thin films was anatase. The optical band gaps of the TiO₂ and 0.1% Ag–TiO₂ thin films were respectively 3.27 and 2.70 eV, while the surface of the prepared catalysts was hydrophobic with the respective average water contact angles of 94.8° and 118.5° for the TiO₂ and 0.1% Ag–TiO₂ thin films. The net efficiencies of photocatalytic nitrate reduction of TiO₂ and 0.1% Ag–TiO₂ were 41.4% and 70.0%, respectively. The loading of Ag only influenced the nitrate removal efficiency without affecting the stoichiometric ratio of formate to nitrate. The net stoichiometric ratio of formate to nitrate of all experiments was 2.8:1.0, which is close to the stoichiometric ratio of 2.5:1.0 of the nitrate reduction to nitrite and then to nitrogen gas.     

基于苯乙烯和苯并噻二唑共聚场效应发光高分子材料的设计合成及性能研究

共轭高分子材料由于其优异的光电性能和可溶液加工等特性在有机光电器件中具有重要应用.本工作采用Stille偶联和Suzuki聚合反应,合成了两个由经典发光基元苯乙烯片段和共轭吸电子结构基元苯并噻二唑共聚的高分子材料聚（1,2-双（2,5-双（异辛氧基）亚苯基亚乙烯基-2,1,3-苯并噻二唑））（PVBT）和聚（1,2-双（2,5-双（正辛氧基）亚苯基亚乙烯基-2,1,3-苯并噻二唑））（nPVBT）.通过凝胶渗透色谱（GPC）、元素分析及差式扫描量热法（DSC）对PVBT和nPVBT两种高分子材料的结构及热稳定性进行表征,结果表明它们均具有良好的热稳定性,分解温度约380℃.由于烷氧基链的存在,两个材料具有良好的溶解性及成膜加工性.PVBT和nPVBT均表现出优异的发光特性,最大发射波长在590~605 nm范围,溶液下荧光量子产率为23%~35%,固态薄膜下量子产率为12%~20%.以这两个高分子材料薄膜作为活性层,所制备的顶栅-底接触型有机场效应晶体管器件显示出典型的p型电荷传输性能,空穴迁移率可达1.1×10^-4 cm²·V^-1·s^-1,开关比为10³~10⁴.本研究为发展高性能光电集成高分子材料提供了新思路,有望推动有机光电集成器件的研究.     

新型有机空穴传输材料氟代四苯基联苯二胺的合成与表征

设计和合成了一种新型的有机空穴传输材料N,N'-二苯基-N,N'-双(2-氟苯基)-[1.1'-联苯]-4,4'-二胺(FTPB),通过熔点测试、元素分析、FTIR光谱和1H NMR谱等手段对其分子结构进行了表征.采用循环伏安法(CV)结合UV-Vis吸收光谱测试了其能级结构.结果表明,其HOMO能级为-5.36eV,带隙为3.20eV,有望成为优良的空穴传输材料.     

Synthesis of oligo(p-phenylene)-linked dyads containing free base, zinc(II) or thallium(III) porphyrins for studies in artificial photosynthesis

A series of (p-phenylene)_n-linked meso-mesityl-substituted porphyrin dyads (n=2-4) was prepared via Suzuki coupling of zinc(II) and free base porphyrin building blocks. The resulting zinc(II)/free base porphyrin dyads were demetalated. The series of free base porphyrin dimers (n=1-4), four other porphyrin dimers (with p-phenylene, diphenylethyne or diphenylbutadiyne linkers; and aryl or tridec-7-yl meso substituents), and several benchmark monomers were converted to the thallium(III)chloride complexes under mild conditions. The collection of eight Tl(III)Cl/Tl(III)Cl dimers is designed for studies of ground-state hole-transfer processes and comparison with the excited-state energy- and hole-transfer processes of the corresponding Zn(II)/free base dyads. Altogether, 18 new porphyrin arrays and benchmark monomers have been prepared.