Thermal helium clusters at 3.2 Kelvin in classical and semiclassical simulations

The thermodynamic stability of⁴He_4–13 at 3.2 K is investigated with the classical Monte Carlo method, with the semiclassical path-integral Monte Carlo (PIMC) method, and with the semiclassical all-order many-body method. In the all-order many-body simulation the dipole-dipole approximation including short-range correction is used. The resulting stability plots are discussed and related to recent TOF experiments by Stephens and King. It is found that with classical Monte Carlo of course the characteristics of the measured mass spectrum cannot be resolved. With PIMC, switching on more and more quantum mechanics. by raising the number of virtual time steps results in more structure in the stability plot, but this did not lead to sufficient agreement with the TOF experiment. Only the all-order many-body method resolved the characteristic structures of the measured mass spectrum, including magic numbers. The result shows the influence of quantum statistics and quantum mechanics on the stability of small neutral helium clusters.     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.     

LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。     

Fermi and Coulomb correlations in the 21 S state of the helium isoelectronic sequence

The Fermi and Coulomb holes of the 2¹ S state of the helium isoelectronic sequence are investigated. Several interesting differences between the results obtained and those which might be expected on the basis of the corresponding 2³ S state are pointed out and discussed.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Optimisation of the connection between TA-MS systems together with improved data interpretation for TA-MS applications

TA-MS provides chemical and thermal response information. In order for this information to be meaningful sampling must be performed with minimum dead volume and without cold spots. Dead volume leads to response lag and peak broadening. Cold spots result in sample condensation, leading to inaccurate data and potentially inlet blockage. This paper describes a hot zone inlet system and 'in-situ' probe both of which provide fast response, zero dead volume sampling directly to the MS. The paper also discusses data interpretation methodologies and introduces 'soft ionisation' as a means of providing simplified analysis of complex mixtures. This revised version was published online in July 2006 with corrections to the Cover Date.     

Shock waves and turbulence in a hypersonic inlet

A numerical investigation for an axisymmetric hypersonic turbulent inlet flow field of a perfect gas is presented for a three-shock configuration consisting of a biconic and a cowl. An upwind parabolized Navier-Stokes solver based on Roe's scheme is used to compute an oncoming flow Mach numberM =8, temperatureT =216 K, and pressureP =5.5293×10³ N/m². In order to assess the flow quantities, the interaction between shock and turbulence, and the inlet efficiency, three different flow calculations — laminar, turbulent with incompressible and compressible two-equationk- turbulence models — have been performed in this work.Computational results show that turbulence is markedly enhanced across an oblique shock with step-like increases in turbulence kinetic energy and dissipation rate. This enhancement is at the expense of the mean kinetic energy of the flow. Therefore, the velocity behind the shock is smaller in turbulent flow and hence the shock becomes stronger. The entropy increase through a shock is caused not only by the amplification of random molecular motion, but also by the enhancement of the chaotic turbulent flow motion. However, only the compressiblek- turbulence model can properly predict a decrease in turbulence length scale across a shock. Our numerical simulation reveals that the incompressiblek- turbulence model exaggerates the interaction between shock and turbulence with turbulence kinetic energy and dissipation rate remaining high and almost undissipated far beyond the shock region. It is shown that proper modeling of turbulence is essential for a realistic prediction of hypersonic inlet flowfield. The performed study shows that the viscous effect is not restricted in the boundary layer but extends into the main flow behind a shock wave. The loss of the available energy in the inlet performance therefore needs to be determined from the shock-turbulence interaction. The present study predicts that the inlet efficiency becomes relatively lower when turbulence is taken into account.     

Medium-size Gaussian basis sets for hydrogen through argon

Summary Medium-sized Gaussian basis sets are reoptimized for the ground states of the atoms from hydrogen through argon. The composition of these basis sets is (4s), (5s), and (6s) for H and He, (9s5p) and (12s7p) for the atoms Li to Ne, and (12s8p) and (12s9p) for the atoms Na to Ar. Basis sets for the² P states of Li and Na, and the³ P states of Be and Mg are also constructed since they are useful in molecular calculations. In all cases, our energies are lower than those obtained previously with Gaussian basis sets of the same size.     

Length of the flooded zone in the column inlet and evaluation of different retention gaps for capillary gas chromatography

In on-column or in splitless injection with recondensation of the solvent, the length of the flooded zone in the column inlet depends primarily on the wettability of the internal wall of the inlet. For columns with a coated inlet this explains why peak distortion due to band broadening in space by a certain sample volume is pronounced in one case and hardly observable in another. Glass or fused silica capillaries silylated with diphenyltetramethyldisilazane were found to give optimal retention gaps. They combine thorough and thermostable deactivation with good wettability and low retention power. On the other hand it is very easy to deactivate fused silica capillaries with Carbowax. The resulting retention gaps are suitable for a wide range of applications and are particularly attractive for the analysis of dirty samples which require frequent replacement of the inlet.     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.