0.8W/80K直线驱动斯特林制冷机的研制

介绍了一种 0 .8W/ 80 K分置式斯特林制冷机。该制冷机采用当前国外先进的直线电机驱动 ,双活塞对称布置结构。该制冷机已通过军品所要求的环境试验 ,输入功率小于 4 0 W(DC)情况下 ,其 +6 0℃高温环境下制冷量≥ 0 .5 W/ 80 K ,带载 0 .5 W工况下 MTTF已突破 2 0 0 0小时。文中主要论述了其工作原理、结构特点、试验情况。     

Energy Analysis of Precooling Air Compressor System

Energy saving is one of the main technique routes for net zero carbon emissions. Air compressor systems take up a large part of energy consumption in the industrial field. A pre-cooling air compressor system was proposed for energy saving by cooling the air before it flows in a compressor. The energy efficiency of the proposed system was analyzed. As additional energy consumption is required for air cooling, the feasibility of the pre-cooling method for energy saving was analyzed. As the efficiency of the pre-cooling air compressor system is mainly influenced by the environment temperature and humidity, applicability of the system in different regions and at different seasons was discussed. A pilot project was performed to verify the technical feasibility and economics of the proposed system. When the precooling temperature of the pilot system was set to 2 °C, the annual pneumatic-electrical ratio of the system can be increased by approximately 2% in several regions of China. This paper shows the pre-cooling air compressor system is feasible for energy saving.     

CAES离心压缩机可调扩压器调节规律研究

离心压缩机是压缩空气储能系统中关键设备之一,需具备在较宽流量、压力范围内高负荷高效率运行的能力。作为一种变工况调节技术,可调扩压器可以扩大压缩机工作流量范围,改善气动性能。因此,本文以某压缩空气储能系统用离心压缩机为研究对象,通过数值计算方法研究了可调扩压器调节时压缩机性能变化规律。结果表明采用可调扩压器可以有效拓宽压缩机运行特性,工作流量范围扩大44%,压比范围扩大25%.此后,本文采用Kriging模型获得了压缩机综合性能曲线图和不同储能工况需求下扩压器的调节方案及规律,为压缩空气储能系统离心压缩机变工况主动控制提供了依据。     

风扇/增压级非设计工况特性分析

本文对某涡扇发动机风扇-外涵道-内涵道整体进行三维定常数值模拟,对内外涵道在设计转速下的流量特性和非设计工况下的气动性能进行了分析。得到内外涵道的稳定工作区域以及在内外涵道堵塞和近失速点的流场信息,为风扇／增压级整体结构的性能评估和优化设计提供了一定的依据。     

压气机悬臂静叶流场非定常数值模拟

以现代高压压气机一排悬臂静叶与一排转叶组成的典型级为研究对象,采用非定常数值模拟方法,分析了非定常与定常数值模拟计算得出的级特性线以及峰值效率点气动参数在展向分布的差异,并对悬臂静叶内部流场结构进行了详细分析,结果表明:当悬臂静叶的轮毂设计间隙为2.5%叶高时,非定常计算的综合喘振裕度比定常大5.85%;在峰值效率点工况下,悬臂静叶总压损失和转子效率的非定常影响范围在10%以内,转叶进口相对气流角沿展向分布的影响在0.5°以内。悬臂静叶根部10%叶高以下区域出现了明显的泄漏流动,3.4%叶高压力系数变化最大,轮毂泄漏流起始于20%弦长附近,发展到70%弦长位置时泄漏损失最大,随后逐渐减弱.     

Impact on the magnetic compressor due to CSR

When an electron bunch is compressed in a chicane compressor, the CSR (coherent synchrotron radiation) will induce energy redistribution along the bunch. Such energy redistribution will affect the longitudinal emittance as a direct consequence. It will also excite betatron oscillation due to the chromatic transfer functions, and hence a transverse emittance change. So, it is indispensable for us to find a way to alleviate the CSR-caused emittance dilution and the bad result of chicane compressor in PKU-FEL.     

进气畸变对压气机稳定性的影响

在低速大尺寸单级压气机实验器上,实验研究了动态进气畸变对压气机稳定边界的影响。并采取在静子叶片表面埋入微型压力传感器的方法,分析了压气机流场的动态压力特性。实验结果表明,动态总压畸变的旋转频率和旋转方向对压气机稳定性有很大的影响,当畸变相对转速n在0~+0．5之间时,压气机失速推迟;分析动态压力的频谱特性后知道,在压气机失速前一般存在与失速相关的压力扰动,动态总压畸变影响这种压力扰动,从而影响压气机的不稳定流动状态。     

跨音压气机近失速状态的非定常特征

本文采用动态测量技术和非定常流动的分析方法,对高速跨音压气机近失速状态时,动叶顶部非定常流动的演变特征进行了实验研究。从时域、频域和流场特征的角度出发,探讨了旋转失速发生和发展过程中,流动失稳的物理机制．结果表明：远离设计工况时的失速先兆特征与临近设计工况时的先兆特征有着本质的区别。展示了非稳定分离流动与后续旋转失速成因的内在联系．     

环形压气机叶棚内部分离流结构分析 第二部分:流道内分离流

1前言认识压气机叶栅内部分离流动的结构和特性,对于揭示压气机内复杂的流动机制、改善叶栅气动性能、减少流动损失和提高压气机喘振裕度具有重要意义山。本文采用激光片光层加示踪粒子流场显示技术,观察和摄取了环形压气机叶栅在约十14”大攻角下的内部流动图像;采用七孔气     

Error and jitter effect studies on the SLED for the BEPC Ⅱ-linac

An RF pulse compressor is a device used to convert a long RF pulse to a short one with a much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor to be used in large-scale linear accelerators. It has been widely studied around the world and applied in the BEPC and BEPC linac for many years. During routine operation, error and jitter effects will deteriorate the performance of SLED, either on the output electromagnetic wave amplitude or phase. The error effects mainly include the frequency drift induced by cooling water temperature variation and the frequency/Q 0 /β unbalances between the two energy storage cavities caused by mechanical fabrication or microwave tuning. The jitter effects refer to the PSK switching phase and time jitters. In this paper, we re-derive the generalized formulae for the conventional SLED used in the BEPC linac, and the error and jitter effects on SLED performance are also investigated.