高速转发引擎设计分析与实现

高速转发引擎是核心路由器设计中的重要难点和关键技术,基于FPGA技术,分析了高速转发引擎设计中的挑战,并给出了一种基于并行流水线机制的10Gbps转发引擎设计方案.     

50 km bidirectional FTTH transmission comparing different PON standards

In this paper, a bidirectional Fiber To The Home (FTTH) is proposed where WDM transmitter is used as a seeding source with wavelength of 1550 nm. The system utilizes a Travelling wave Semiconductor Optical Amplifier (TSOA) with injection current 0.15A. 50 km range FTTH architecture is demonstrated for both downstream and upstream channels. We investigated the impact of different data rates on upstream and downstream data. The BER results show that the performance of our scheme is good for 10 Gbps system for downstream transmission as it accommodates 64 ONUs. From simulation results show the BER of 9.95e-009 is reported at 15 Gbps but only in case of 32 ONUs. Similarly, in case of upstream transmission, Q-Factor of 15.04 dB is reported for 32 ONUs. So this scheme is a practical solution to meet the data rate of the optical links simultaneously in tomorrow's PON access networks.     

Operation of low driving voltage cascaded modulator over non-cascaded modulator for 4 dB extinction ratio at 100 giga bit per second (Gbps)

This paper describes improved results when comparing cascaded traveling wave electro absorption modulator (TWEAM) to non-cascaded TWEAM by simulation. Large signal modeling is used for both types of modulators to achieve 4 and 10 dB extinction ratios (ERs) with flat frequency response for applications in short distance as well as long distance optical fiber communication. To obtain 4 and 10 dB ERs with 110 GHz 3 dB bandwidth, a cascaded TWEAM requires 0.4 V peak to peak (V_P-P) and 1 V_P-P input driving voltages respectively. A non-cascaded TWEAM requires about two times the input driving voltage compared to the cascaded modulator to achieve the same values of ER and 3 dB bandwidth. Both modulators have been simulated with the same bias and also use the same circuit parameters except for the total active segment lengths (1 and 0.5 mm for cascaded and non-cascaded modulator respectively) and microstrip lengths to obtain the same ERs and 3 dB bandwidths.     

SDOWN: A Novel Algorithm and Comparative Performance Analysis of Underlying Infrastructure in Software Defined Heterogeneous Network

In this article, a comparative performance analysis of three (03) different algorithms operating in the control plane of the three (03) varied architectures such as Physically Distributed, Logically Distributed, and Physically Centralized Architecture has been done. The paper also elucidates the working and implementation of the three proposed architectures with suitable block diagram of system model. Besides, in these architecture models OpenFlow (OF) governed various MATLAB components have been designed such as Application Controller, Optical Transport Network Controller, SDOWN Controller, Ethernet switch-1 and 2, ROADM and Wi-Fi access point with suitable interfaces. Pseudo codes of the algorithms operating in above said MATLAB components are duly explained with flowcharts. Mathematical analysis of three different architecture in respect of latency is carried out, and results and discussions with suitable figures have also been represented. The results obtained show that out of three (03) aforesaid architectures the Physical Centralized Architecture has better performance upto 45 Km in terms of Q-factor, SNR, BER, Jitter and Latency.     

4.25 Gbps小型可热插拔光收发模块的设计与测试

对4.25 Gbps小型化可热插拔(SFP)光收发模块的关键参数进行了理论分析,从发射、接收和控制3个方面讨论了模块的结构组成,设计出了符合SFP MSA及SFF-8472协议的光模块,并根据此设计方案制作了样品模块。在-40,25,85 ℃环境温度下测试和分析了模块的性能指标,结果显示其光功率、消光比和灵敏度等均符合设计要求,且在适用温度范围内表现出良好的稳定性。实验证实了方案的可行性,为模块的产品化提供了参考。     

Clock recovery from 40 Gbps optical signal with optical phase-locked loop based on a terahertz optical asymmetric demultiplexer

10 GHz clock recovery from 40 Gbps optical time-division-multiplexed (OTDM) signal pulses is experimentally demonstrated using optical phase lock loop based on a terahertz optical asymmetric demultiplexer (TOAD) with a local-reference-oscillator-free electronic feedback circuit. The clock pulse that was used as the control pulse had energy of 800 fJ and the SNR of the time-extracted 10 GHz RF signal to the side components was larger than 40 dB.     

40Gb/s光纤传输单边带归零信号的产生和性能分析

对光的单边带归零信号（SSBRZ）的一种产生方式进行了推导.通过合理设置调制器的偏置电压，使产生的SSBRZ信号的一个边带得到更有效的抑制，而且没有引起光脉冲的变形.对其在普通单模光纤（SMF）40Gb/s传输系统中的传输进行了仿真，并和归零（RZ）信号、载波抑制的RZ（CSRZ）信号的性能相比较，结果表明：在色散完全补偿的单信道传输系统中，SSBRZ的抗非线性能力比RZ、CSRZ强.     

An 8 × 10 Gbps parallel single-chip light-to-logic converter

An 8 × 10 Gbps direct light-to-logic converter for hybrid mounted Ge photodiodes is presented. The receiver is realized in standard 0.35 μm SiGe BiCMOS technology and the Ge photodetector is directly mounted on the top of the CMOS wafer. Each of the 8 channels includes a transimpedance amplifier, limiting amplifier stages and a 50 Ω CML output driver. The overall transimpedance is 275 kΩ and at a data rate of 10 Gpbs a sensitivity of − 23.1 dBm (BER = 10⁻⁹) is reached.     

10Gbps-RZ光信号在光纤光栅色散补偿的2500km无电中继系统中的传输

全部利用线性啁啾光纤布拉格光栅(CBG)作色散补偿模块和在线通道滤波器,在2500km G.652光纤上实现10Gbps-RZ光信号的超长距离无电中继传输。在2081km处,功率代价~3dBm(RZ码,BER=10-12,PRBS=1023-1);在2560km处,功率代价~5dBm,远优于相同系统平台下NRZ无误码传输时的性能。     

Study of Internal Wavelength Locker Integrated 10 Gbps Electro-Absorption Modulated Laser Modules in Metro DWDM Applications

Several different divergences are tested in the several internal wavelength locker schemes for 10 Gbps electro-absorption modulated laser (EML) module. A 10 Gbps EML module with a simple and robust internal wavelength locker for metro dense WDM application is successfully demonstrated. The wavelength aging over 2000 h is done at elevated temperature of 70°C. The average wavelength drift of 10 modules is measured to be ± 5 pm. These modules can be successfully applied to the 10 Gbps DWDM systems with 50 GHz channel spacing.