Charge manipulation and imaging of the Mn acceptor state in GaAs by cross-sectional scanning tunneling microscopy

An individual Mn acceptor in GaAs is mapped by cross-sectional scanning tunneling microscopy (X-STM) at room temperature and a strongly anisotropic shape of the acceptor state is observed. An acceptor state manifests itself as a cross-like feature which we attribute to a valence hole weakly bound to the Mn ion forming the (Mn²⁺3d⁵+hole) complex. We propose that the observed anisotropy of the Mn acceptor wavefunction is due to the d-wave present in the acceptor ground state.     

稳态锁模产生4ps激光脉冲

首次利用ＧａＡｓ光电导开关，控制Ｎｄ：ＹＬＦ激光器腔内Ｑ值，实现稳态锁模，获得脉宽和能量稳定性极高的４ｐｓ激光脉冲。     

激光二极管抽运的GaAs被动Q开关Nd：YVO4激光器

利用固体可饱和吸收体砷化镓（GaAs）作为被动调Q元件，实现了激光二极管抽运平－凹腔掺钕钒酸钇（Nd:YVO4）激光调Q运转，详细测量了砷化镓被动调QNd:YVO4激光输出特性，获得脉宽15ns，重复频率470kHz，光束质量M^2=1.31的激光输出，调Q激光运转阈值为500mW，并数值求解了砷化镓被动调Q速率方程，讨论了被动调Q机理以及调Q脉冲宽度和脉冲重复频率对抽运速率的依赖关系，理论计算结果与实验结果相一致。     

Millimeter and submillimeter detection using Ga1?xAlxAs/GaAs heterostructures

We have shown that a Ga_1–xAl_xAs/GaAs heterostructure can be used as a sensitive tunable detector of mm-wave/sub-mm-wave radiation. The mechanism for detection requires the application of a magnetic field varying from approximately 0.2T at 94GHz (3.2mm wavelength) to 6.2T at 2500GHz (119m wavelength). The responsivity and N.E.P. at 3.2mm have been roughly estimated at 200V/W and 5×10^–11W/Hz respectively. The speed of such a detector could be several orders of magnitude greater than comparable InSb detectors.     

Syntheses of TiO2(B) nanowires and TiO2 anatase nanowires by hydrothermal and post-heat treatments

TiO₂(B) nanowires and TiO₂ anatase nanowires were synthesized by the hydrothermal processing in 10 M NaOH aq. at 150 °C followed by the post-heat treatment at 300-800 °C. As-synthesized Na-free titanate nanowires (prepared by the hydrothermal treatment and repeated ion exchanging by HCl (aq.) were transformed into TiO₂(B) structure with maintaining 1-D morphology at 300-500 °C, and further transformed into anatase structure at 600-800 °C with keeping 1-D shape. At 900 °C, they transformed into rod-shaped rutile grains. Microstructure of these 1-D TiO₂ nanomaterials is reported.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

Surfaces and interfaces in short-period GaAs/AlAs superlattices

Photoelectron spectroscopy, in particular the angular resolved photoemission excited by ultraviolet radiation (ARUPS), provides the most direct experimental information about the electron structure of crystals, both of the bulk and of the low-index surfaces. The sensitivity of the method, as well as its difficulties, when applied to GaAs/AlAs superlattices are described. The new periodicity of these man-made crystals in the direction of their growth (e.g., in the layer-by-layer growth in molecular beam epitaxy), is responsible for opening of the new energy gaps (so-called minigaps) in the electron energy bands of crystals forming the superlattice. In addition to the well-known confinement of electrons at the valence and conduction band edges in long-period superlattices, the electron confinement to the interfaces has also been found in the vicinity of minigaps in short-period superlattices. The role of this confinement in the intensities of electrons photoemitted from superlattice surfaces is discussed. Superlattices with different thicknesses in the topmost layers represent systems with a simple change of the surface atomic structure. The predictions of one-dimensional models about a change of the surface-state energy within the band gap with a change of crystal potential termination are tested for the ideally terminated (1 0 0) surface of a very thin superlattice (GaAs)₂(AlAs)₂. The results of the energy distributions of photoemitted electrons, calculated in the one-step model of photoemission, show that the ARUPS experimental observation of surface-state shifts should be possible, at least in larger minigaps. The results indicate the possibility of a straightforward tuning of the electronic structure of the superlattice surface by geometrical means.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

Self-Assembly of Gold Nanoclusters on Molecularly Modified GaAs

The elaboration of closed-packed monolayers of Au₅₅(PPh₃)₁₂Cl₆ clusters on oxidized and non-oxidized GaAs surfaces is reported. The first part of this work describes the use of silanethiol modified GaAs oxide surfaces to trap 18 nm gold colloids and Au₅₅(PPh₃)₁₂Cl₆ clusters. The surfaces characterized by AFM measurements present high-quality coverage on a quite long range for both metallic species. The second part is devoted to the elaboration of Au₅₅(PPh₃)₁₂Cl₆ cluster monolayers on non-oxidized p-type GaAs substrates, functionalized with dithiol molecules. AFM measurements demonstrate the presence of closed-packed two-dimensional arrangements of Au₅₅ clusters.     

Amperometric Determination of lndole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

Platinum nanowire （PtNW） can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm. The PtNW and multiwalled carbon nanotubes （CNT） are then dispersed into chitosan （CHIT） solution. The resulting PtNW-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of PtNW and CNT. By dropping the PtNW-CNT-CHIT film onto the glassy carbon （GO） electrode surface, and after evaporation an amperometric sensor for the determination of indole-3-acetic acid （IAA） was developed. The oxidation current of IAA increased significantly at the PtNW-CNT-CHIT film coated GC electrode, in contrast to that at the CNT-CHIT modified GC. The linear response of the sensor is from 50 ng/ml to 50 μg/ml with a detection limit of 25 ng/mL.