Using multi-exposure of color fringes to measure the beating motion of a moth

A multi-exposure of color fringes method has been developed to improve the capture speed of a conventional color CCD camera. In the method, four groups of projected fringe patterns encoded with different colors and different directions are stored in one CCD frame. Therefore the capture frequency of the conventional CCD can be improved to 200 Hz. It is available to measure the insect wings with low beating frequency, such as dragonfly, moth, or butterfly, whose beating frequency is about 30–40 Hz. We have used the method to measure the beating motion of a moth successfully.     

一种改进的自适应模糊阈值图象分割方法

自适应模糊阈值图象分割方法的关键和困难在于隶属函数窗宽的自动调整和阈值搜索范围的确定.依靠图象灰度的统计特性初步确定阈值搜索范围，提出了一种改进方法，进而得到隶属函数的窗宽.实验表明这种方法避免了确定图象灰度直方图峰位置的困难，对较低亮度图象分割效果良好.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

机器人头部的视觉跟踪系统研究

对运动目标进行识别和跟踪是机器人视觉的一项关键技术。提出了一种可以快速跟踪运动目标的系统设计方案,采用了双计算机处理和Memolink通信方式的机器人控制结构,以图像处理为基础,在图像经过校正之后,通过区域分割和目标识别两个步骤来确定目标的位置,并控制机器人对目标进行跟踪。实验表明,该方法具有较高的速度和准确性。     

Linear calibration procedure for the phase-to-height relationship in phase measurement profilometry

Calibration of the relationship between height and phase is of uttermost importance to perform accurate 3D measurements in phase measurement profilometry. This work reports a different approach to this problem by first looking at the analytical expression for this relationship and determining the regime spanned by the fringe analysis method. The conclusions thus ascertained, amply justify confronting the analytical expression with a simple normalization procedure of the experimental data, with a remarkable matching between both results. In light of this, a linear calibration procedure with just one plane is proposed and verified experimentally.     

Interference of circularly polarized light: contrast and application in fabrication of three-dimensional periodic microstructures

The contrast of interference pattern formed by two circularly polarized waves and by a linearly polarized wave and a circularly polarized one is discussed. The results are compared with that by two linear beams. It shows that the use of circular light in holographic fabrication of three-dimensional periodic microstructures may remove the necessity of beam ratio and polarization optimization needed in the interference of three linear noncoplanar beams and improve the uniform contrast of resultant pattern simultaneously.     

运用反例基于识别的手写数字串分割

采用基于识别的分割方法进行手写数字串分割.在识别的过程中,运用反例样本估计分类器参数,实验数据表明,这种运用反例样本训练的分类器与没有经过反例样本训练的分类器相比,将提高拒识率到19%左右,从而保证了较高的识别率,验证了只有经过反例训练的分类器的输出结果才是可信赖的.     

一种基于代价函数和模糊熵的图像分割方法

提出了一种基于代价函数和模糊熵的图像分割方法.该方法先用代价函数最小化法对退化的图像作预处理,之后,利用模糊熵作进一步的处理.实验结果表明:新方法和一般的阈值分割方法相比,不但分割图像的错分率较小,而且图像的视觉效果也有较大的改善.     

基于小波变换及布朗分形模型的纹理分割

在研究小波变换及布朗分形模型的基础上，定义了水平分维数，垂直分维数，对角分维数，并将它们作为纹理特征量来实现纹理的分割．实验结果表明，这些特征量能够很好地反映纹理特征，从而分割时不需有关图象中纹理类别的先验信息，较以往方法在准确度和计算复杂程度上都有很大提高．     

Tracing of interference fringes using average gray value and simultaneous row and column scan

An algorithm for computer tracing of interference fringes is reported. The method uses the average gray-level value for thresholding, row and column scans for determining the type of the scan and simultaneous row and column scan for tracing. The proposed method yield good result even for low-contrast and high-noise images. The program for the interferogram tracing was written using MATLAB6.