用板式电势差计测量电池的电动势和内阻实验的改进

分析了在“用板式电势差计测量电池的电动势和内阻”实验中 ,由于待测干电池的电动势和内阻在实验过程中均不为恒定值而引起的误差 ,依据电化学理论和电阻构成解释了实验现象 ,并给出了实验改进方案 .     

Temperature-dependent dry etching characteristics of III–V semiconductors in HBr- and HI-based discharges

Microwave discharges of HBr/H₂/Ar and H/H₂/Ar with additional do biasing of the sample were used to etch InP, GaAs, and AlGaAs at temperatures between 50–250°C. The etch rates increase by factors of 3–50 and 5–9, respectively, for HBr-and HI-based discharges over this temperature range, but display non-Arrhenius behavior. The etched surfaces became very rough above 100°C for InP with either discharge chemistry due to preferential loss of P, while GaAs and AlGaAs are more tolerant of the elevated temperature etching. The near-surface electrical properties of InP are severely degraded by etch temperatures above 100°C, while extensive hydrogen in-diffusion occurs in GaAs and AlGaAs under these conditions, leading to dopant passivation which can be reversed by annealing at 400°C.     

杂原子B—ZSM—35沸石的干法合成,表征及CO＋H2反应性能的研究

首次利用吸附态模板剂在Ｎａ２Ｏ－ＳｉＯ２－Ｂ２Ｏ３－ＤＥＡ干粉体系中合成了杂原子Ｂ－ＳＺＭ－３５沸石，ＸＲＤ，ＳＥＭ，ＩＲ，及ＣＯ加氢反应研究了其物理化学特性。结果表明，Ｂ原子同晶取代Ａｌ原子进入ＺＳＭ－３５沸石骨加。     

SYNTHESIS OF SODALITE BY DRY POWDER METHOD

用新颖的干粉方法合成系列沸石的研究已从五元环沸石延伸到具有四元环和六元环的方钠石。本研究运用干粉方法在Ｎａ２Ｏ－ＳｉＯ２－Ａｌ２Ｏ３混合物中分别以乙醇胺和乙二胺－氟化物为模板，合成出了方钠石。有机模板剂以吸附态模板方式进入体系。用ＸＲＤ数据、扫描电镜图及红外光谱测试结果对实验产品做了表征。结果表明，干粉体系制备的方钠石的晶胞参数小于水热体系和非水体系合成的方钠石的相应值。而以乙醇胺为模板制备的方钠石与以乙二胺－氟化物为模板的样品比较，后者具有较快的晶化速度、较小的晶胞体积和晶粒     

High Performance Varistor Discs Obtained from Chemically Synthesized Doped Zinc Oxide Powder

The ceramic microstructure, the chemical homogeneity of specific dopants and the mechanical integrity of a varistor disc are critical parameters in determining the transient voltage suppression features of these devices. The material properties and overall quality of the starting ceramic powders used to produce such components are essential in achieving the desired properties. The present work describes a novel chemical method developed to produce doped zinc oxide powders and an industrial scale manufacturing process for the production of final varistor blocks for surge arrester applications. The results are compared with those obtained when using standard varistor powder made by the mixed oxide route is used. All the fundamental electrical properties of the discs have been determined and correlated with the relevant manufacturing steps.     

DRY METHOD SYNTHESIS OF PURE SILICEOUS FORM OF ZEOLITE ZSM-35

IntroductionZeoliteZSM-35isclassifiedasfcrricritc(FER)t\pc.x'hicllalsoincludesZSM-ZI.ZSM-38andFER.Zeolitesofthist}'pcha\lcrclatit'CI}UlldiscrinlinablcXRDpattcnlswhichindicatetheirsinlilarit\'illst,u.tu,.,I11.Thehighsiliceousfonllsofthesezeolitesarcgcllcra…     

Hybrid electron cyclotron resonance-radio-frequency plasma etching of III–V semiconductors in Cl2-based discharges. Part I: GaAs and related compounds

A systematic study has been performed of the dry etching characteristics of GaAs, Al_0.3Ga_0.7As, and GaSb in chlorine-based electron cyclotron resonance (ECR) discharges. The gas mixtures investigated were CCl₂F₂/O₂, CHCl₂F/O₂, and PCl₃. The etching rates of all three materials increase rapidly with applied RF power, while the addition of the microwave power at moderate levels (150 W) increases the etch rates by 20–80%. In the microwave discharges, the etch rates decrease with increasing pressure, but at 1 m Torr it is possible to obtain usable rates for self-bias voltages 100 V. Of the Freon-based mixtures, CHCl₂F provides the least degradation of optical (photoluminescence) and electrical (diode ideality factors and Schottky barrier heights) properties of GaAs as a result of dry etching. Smooth surface morphologies are obtained on all three materials provided the microwave power is limited to 200 W. Above this power, there is surface roughening evident with all of the gas mixtures investigated.     

Promoting effect of Pt in Ni-based catalysts for CH4 reforming

The effect of Pt/Ni ratio on the surface properties and catalytic behavior of bimetallic PtNi catalysts for reforming of methane with CO₂ was studied. The TPR, FTIR of adsorbed CO and XPS data showed that introduction of a small amount of Pt (0.3 – 0.5 wt.%) into the Ni catalyst leads to a decrease of the NiO size, its easy reduction and a uniform distribution of the nickel metal particles.     

微波辐射下苯偶姻的干法氧化反应

研究了微波辐射下干法氧化苯偶姻生成苯偶酰的反应。结果表明，硅胶和酸性氧化铝是本反应的良好载体，空气是良好的氧化剂。在较短时间内(8～15min)即可获得很高的产率(92%～98%)，为一种有效的苯偶姻氧化反应新方法。     

Fly‐Ash‐Supported Synthesis of 2‐Mercaptobenzothiazole Derivatives under Microwave Irradiation

Microwave‐assisted, solvent‐free alkylation and acylation of 2‐mercaptobenzothiazole has been attempted using silica gel, alumina, and a new solid support, fly ash. Fly ash, a waste generated at thermal power stations, could be used as solid support just as efficiently as commercial supports. The additional features of methodology include a much faster reaction, easy workup, higher yields, higher purity of the products, and an ecofriendly approach.