不同重力环境下辐射加热材料表面着火特性分析

研究外界辐射加热下，不同重力环境中热薄燃料的着火特性．探讨了重力、环境氧浓度、环境压力及外界辐射强度对着火的影响．结果表明，随着重力的变化，存在不同的着火机制．在微重力和在高的环境氧浓度中，材料的着火延迟时间变短．压力减小，着火延迟时间增大．随着辐射强度的增大，着火延迟时间变小．     

OSCILLATION OF A FORCED SECOND ORDER NONLINEAR EQUATION

ＯＳＣＩＬＬＡＴＩＯＮ ＯＦ Ａ ＦＯＲＣＥＤ ＳＥＣＯＮＤ ＯＲＤＥＲ ＮＯＮＬＩＮＥＡＲ ＥＱＵＡＴＩＯＮ ￥ＫＯＮＧＱＩＮＧＫＡＩ；ＺＨＡＮＧＢＩＮＧＧＥＮＡｂｓｔｒａｃｔ：Ｔｈｉｓｐａｐｅｒｇｉｖｅｓｓｅｖｅｒａｌｃｒｉｔｅｒｉａｏｎｔｈｅｏ...     

用于快点火研究的超短脉冲的相干合成

 利用傅里叶光学方法，建立了一个基于远场的多束超短脉冲相干合成的理论模型。研究了一个口径为50 cm，脉宽为1 ps的超短脉冲相干合成系统的各种误差对脉冲远场时域和空域特性的影响。结果表明：若要求远场的一倍衍射极限区域的积分能量分布达到理想情况下的90％，该系统的相位延迟误差小于0.63，沿x方向角度误差小于0.37 μrad，沿y方向角度误差小于0.34 μrad；若要求远场叠加脉冲的时域展宽小于25％，系统的剩余啁啾因子应小于1.32(不考虑相位延迟)或1.52(考虑0.63的相位延迟)。     

Advanced kinetic tools for the evaluation of decomposition reactions

Summary An advanced kinetic study on the thermal behaviour of pyrotechnic ignition mixtures has been carried out by differential scanning calorimetry using different B/KNO3 mixtures (50:50, 30:70, 20:80) as a model reaction. The experimental conditions applied (isochoric conditions/closed crucibles and isobaric conditions/open crucibles) as well as the composition of the mixtures noticeably influences the relative thermal stabilities of the energetic materials. The kinetic study focused on the prediction of the thermal stability of the different mixtures both in extended temperature ranges and under temperature conditions at which ordinary investigation would be very difficult. Using advanced numerical tools [1], thermal ageing and influence of the complex thermal environment on the heat accumulation conditions were computed. This can be done for any surrounding temperature profile such as isothermal, non-isothermal, stepwise, modulated, shock, adiabatic conditions and additionally for temperature profiles reflecting real atmospheric temperature changes (yearly temperature profiles of different climates with daily minimal and maximal fluctuations). Applications of accurate decomposition kinetics enabled the determination of the time to maximum rate under adiabatic conditions (TMR_ad) with a precision given by the confidence interval of the predictions. This analysis can then be applied for the examination of the effects of the surrounding temperature for safe storage or transportation conditions (e.g. determination of the safe transport or storage temperatures).     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

A Stability-Indicating LC Method for Candesartan Cilexetil

An isocratic reversed-phase liquid chromatographic method has been developed for quantitative determination of candesartan cilexetil, used to treat hypertension, in the bulk drug and in pharmaceutical dosage forms. The method is also applicable to analysis of related substances. Chromatographic separation was achieved on a 250 mm × 4.6 mm, 5 μm particle, CN column with a 50:50 (v/v) mixture of phosphate buffer, pH 3.0, and acetonitrile as mobile phase. The flow rate was 1.0 mL min⁻¹ and the detection wavelength was 210 nm. Resolution of candesartan cilexetil and six potential impurities was greater than 2.0 for all pairs of compounds. The drug was subjected to hydrolytic, oxidative, photolytic, and thermal stress and substantial degradation occurred in alkaline and acidic media and under oxidative and hydrolytic stress conditions. The major product obtained as a result of basic hydrolysis was different from that produced by acid hydrolysis and aqueous hydrolysis. The stress samples were assayed against a reference standard and the mass balance was found to be close to 99.6%. The method was validated for linearity, accuracy, precision, and robustness.     

Experimental and Theoretical Studies of a Pulsed Microwave Excited Ar/CF4 Plasma

The present work deals with a pulsed microwave discharge in an Ar/CF ₄ gas mixture under a low pressure (1–10 mbar). The discharge chamber developed has a cylindrical geometry with a coupling window alternatively made of quartz or alumina. The setup allows one to investigate the plasma–wall interactions (here etching of the quartz window) and the ignition process of the pulsed microwave plasma. Microwave pulses with a duration of 50–200 s and repetition rate between 1 and 10 kHz are typical for the experiments. The space-time behavior of the fluorine number density in the discharge has been investigated experimentally by optical actinometry. The discharge kinetics is modeled using electron-transport parameters and rate coefficients derived from solutions of the Boltzmann equation. Together with the solution of the continuity and electron balance equations and the rate equations describing the production of CF _x (x=2, 3, 4) radicals and F atoms, a good agreement between experimental and theoretical data can be achieved.     

Quantitative measurement of hard X-ray spectra from laser-driven fast ignition plasma

Absolute Kα line spectroscopy is proposed for studying laser–plasma interactions taking place in the Au cone-guided fast ignition targets. X-ray spectra ranging from 20 to 100 keV were quantitatively measured with a Laue spectrometer composed of a cylindrically curved crystal and a filter-absorption method for Bremsstrahlung continuum emission. The absolute sensitivities of the Laue spectrometer systems were calibrated using pre-characterized laser-produced X-ray sources and radioisotopes. The integrated reflectivity for the crystal is in good agreement with predictions by an X-ray diffraction code. The energy transfer efficiency from incident laser beams to hot electrons, as the energy transfer mechanism, is derived from this work. The absolute yield of Au and Ta Kα lines were measured in the fast ignition experimental campaign performed at Institute of Laser Engineering, Osaka University. Applying the hot electron spectrum information from electron spectrometer and scaling laws, the energy transfer efficiency from the incident LFEX, a kJ-class PW laser, to hot electrons was derived for the first time.     

Analysis on First-stage Ignition of n-Heptane at Low Temperatures with a Lumped Skeletal Mechanism

Two-stage ignition exists in the low-temperature combustion process of n-heptane and the first-stage ignition also shows a negative temperature coefficient(NTC) phenomenon. To study key reactions and understand chemical principles affecting the first-stage ignition of n-heptane, a lumped skeletal mechanism with 62 species is obtained based on the detailed NUIGMech1.0 mechanism using the directed relation graph method assisted by sensitivity analysis and isomer lumping. The lumped mechanism shows good performance on ignition delay time under wide conditions. The study revealed that the temperature after the first-stage ignition is higher and a larger amount of fuel is consumed at lower initial temperatures. The temperature at the first-stage ignition is relatively insensitive to the initial temperature. Further sensitivity analysis and reaction path analysis carried out based on the lumped mechanism show that the decomposition of RO₂ to produce alkene and HO₂is the most important reaction to inhibit the first-stage ignitions. The chain branching explosion closely related to the first-stage ignition will be terminated when the rate constant for the RO₂ decomposition is larger than that of the isomerization of RO₂ to produce QOOH. The NTC behavior as well as other characteristics of the first-stage ignition can be rationalized from the competition between these two reactions.     

激光核聚变与高功率激光:历史与进展

回顾激光聚变近50年来的发展历程,评述聚变物理与高功率激光驱动器的研究进展,展望聚变能源未来前景.