LaB6-ZrB2共晶复合材料的组织特征及控制

用电弧炉和电子束悬浮区熔炉法制备了ＬａＢ６ＺｒＢ２共晶复合材料，并用ＳＥＭ和ＴＥＭ方法对其显微组织进行了研究。结果表明，ＬａＢ６ＺｒＢ２形成纤维状共晶组织，控制凝固条件可得到定向排列的组织，ＬａＢ６基体上均匀分布着直径为０２～１２μｍ的ＺｒＢ２纤维，纤维长度可达１００μｍ以上。对于固液界面为平面生长的试样，其结晶学取向关系为［００１］ＬａＢ６∥［００１］ＺｒＢ２，（１１０）ＬａＢ６∥（０１０）ＺｒＢ２。     

低共熔混合锂盐相图的绘制及应用

采用热分析法对不同组成的混合锂盐二元体系进行研究, 绘制了混合锂盐体系的步冷曲线和T-x相图, 结果表明体系均为具有最低共熔点的二元体系. LiOH-LiNO3、LiOH-LiCl、LiOH-Li2CO3及LiNO3-LiCl体系的最低共熔点分别为175.7、294.5、418.2及221.6 ℃. 利用低共熔混合物LiNO3-LiOH为锂盐与不同前驱体反应, 制备出了层状结构良好的锂离子电池正极材料LiNiO2、LiNi0.8Co0.2O2及LiNi1/3Co1/3Mn1/3O2. X射线衍射分析表明, 合成的材料具有规整的层状NaFeO2结构, 且XRD衍射峰强度之比I(003)/I(104)>2.0, 电性能测试表明, 在2.7-4.3 V(vs Li/Li+)的电压范围内进行0.1C倍率充放电, LiNiO2、LiNi0.8Co0.2O2、LiNi1/3Co1/3Mn1/3O2首次充电比容量分别达168.0、225.4、194.0 mAh·g-1, 放电比容量分别为138.4、165.8、157.7 mAh·g-1.     

Binary solid-liquid phase diagram of the two diastereomer racemates of triglycidyl isocyanurate (TGIC)

Triglycidyl isocyanurate [2451-62-9] as a trifunctional epoxy monomer is mostly used as curing agent. It exists in the form of two diastereomer racemates according to the configuration of the three chiral carbon atoms in the molecule, i.e. beta- or RRR/SSS and alpha- or RRS/SSR. The binary solid-liquid phase diagram of the two diastereomer racemates has been determined by differential scanning calorimetry (DSC). The two diastereomer racemates have different crystalline structures and are physical mixtures with an eutectic phase diagram. The eutectic mixture melts at 92.3 ± 1.0 °C and has alpha-TGIC content of 93.44% by mass or mole. With the help of the phase diagram the ratio of the two diastereomer racemates in TGIC may be determined. The binary phase diagram shows that beta-TGIC can be separated with efficiency from the mixture and may serve for enantiomer synthesis of high optical activity giving rise to the development of novel polymers.     

Mixed-metal flux synthesis of quaternary RMn2TrxZn20−x compounds with Tr=Al, In

Eighteen new intermetallic compounds RMn₂Tr_xZn_20−x (2<x<7; R=rare-earth metal; Tr=Al, In) were synthesized using low-melting mixtures of (Tr/Zn) as a solvent. Structural refinement using single-crystal X-ray diffraction data shows that the compounds are substituted variants of the cubic CeCr₂Al₂₀-type structure (Fd-3m, Z=8; unit cell parameters vary from a=14.1152(3)Å for YbMn₂Al_5.3Zn_14.7 to a=14.8125(4)Å for SmMn₂In_5.9Zn_14.1). The Zn and Tr elements show site preferences in the indium compounds, but not in the aluminum analogs. The substitution of trielide element for zinc modifies the valence electron count of the compounds to allow for the incorporation of Mn into the structure. Magnetic susceptibility data show no evidence of magnetic ordering down to 3 K.     

Synthesis of Cu–Cr diketo,sublimable, eutectic composite complex,rod crystals from LDH as suitable MOCVD precursor of CuCr2O4 catalysts upon ceramic preforms for N2O decomposition

Metal-acteylacetonates are important sublimable metal-organic precursors for metal-oxide thin film formation over solid preforms by MOCVD (Metal Organic Chemical Vapour Deposition) technique. Mixed-metal-acetylacetonates (MMAA) are suitable starting materials for mixed metal nano-oxidic thin film formation through such facile routes. Layered Double Hydroxides (LDH) of suitable metal ion combination can perform as appropriate starting base for neutralisation by enol form of 2,4-pentanedione or acteylacetonate tautomer ligands to obtain such MMAA. In this paper synthesis of composite crystals of Cu(II)/Cr(III) acetylacetonates (CCAA) is reported by the reaction of Cu–Cr-LDH with acetylacetone. The products were characterized by various different techniques. The surface area and pore volume analysis of the crystals showed the formation of nanopores in the compound. TEM analysis confirmed that the inner core of the nanoporous crystals of Cu(acac)₂ was covered by coating of poorly crystallised Cr(acac)₃ and they together form the composite crystals, and they together form the composite crystals. Due to eutectic mixture formation the melting point of CCAA lies in between the melting points of individual components Cu(acac)₂ and Cr(acac)₃ and shows sublimability, a property important for the formation of MOCVD films. The composite was used for CuCr₂O₄ spinel mixed oxide films formation over solid ceramic honeycomb monolithic substrates. Application prospects of the route in the field of catalysis is high as it can directly combine the benefits of mixed metal oxide catalysis and structured supports without the involvement of a third component. In this work the performance of such a catalytic device has been tested for low temperature decomposition of high Global Warming Potential (GWP) gas N₂O to N₂ and O₂.     

Choline chloride – Urea deep eutectic solvent an efficient media for the preparation of metal nanoparticles

Metal nanoparticles are nanosized structures that have different potential applications in biological, chemical, medical, and agricultural fields because of their exotic characteristics. Their size ranges from 1 to 100 nm. Metal nanoparticles are either purer forms of metals (eg: Gold, Silver, Copper, Iron, etc.) or their compounds (eg: sulfides, hydroxides, oxides, etc.). Ionic liquids are generally used in the extraction of nanoparticles but they are challenging because of their indigent bio-degradability, bio-compatibility, and sustainability. So Deep Eutectic Solvent (DES) is reported as an alternative to ionic liquids in the formation of nanoparticles. The DESs are a complex of quaternary ammonium salts and hydrogen donors or metal salt. DESs contain higher non-symmetric ions which have lower lattice energy and hence they have a lower melting point. This research utilizes a novel DES (choline chloride – urea) as an effective solvent to produce mercuric sulfide (HgS), zirconium oxide (ZrO), manganese oxide (MnO), and copper oxide (CuO) nanoparticles. As a result, the production of these metal nanoparticles using Choline Chloride (C₅H₁₄ClNO) – Urea DES can be treated as a promising way in chemical manufacturing. The nanoparticles have been analyzed using Ultra Violet Spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Energy Dispersive X-Ray Analysis (EDAX).     

Growth of new ternary intermetallic phases from Ca/Zn eutectic flux

The eutectic 7.3:2.7 molar ratio mixture of calcium and zinc metal melts at 394 °C and was explored as a solvent for the growth of new intermetallic phases for potential use as hydrogen storage materials. The reaction of nickel in this molten mixture produces two new phases—the CaCu₅-related structure CaNi₂Zn₃ (P6/mmm, a=8.9814(5) Å, c=4.0665(5) Å) and a new cubic structure Ca₂₁Ni₂Zn₃₆ (Fd-3m, a=21.5051(4) Å). Palladium-containing reactions produced CaPd_0.85Zn_1.15 with the orthorhombic TiNiSi structure type (Pnma, a=7.1728(9) Å, b=4.3949(5) Å, c=7.7430(9) Å). Reactions of platinum in the Ca/Zn mixture produce Ca₆Pt₃Zn₅, with an orthorhombic structure related to that of W₃CoB₃ (Pmmn, a=13.7339(9) Å, b=4.3907(3) Å, c=10.7894(7) Å).     

Characteristics of cobalt-based alloy coating on tool steel prepared by powder feeding laser cladding

Co-based alloy coating was deposited on tool steel by powder feeding laser cladding. Sections of such coatings were examined to reveal their microstructures and phases using scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the prime phase (γ-Co dendrite) and other phases, including Cr₂₃C₆, Co₇W₆, and CrNi existed in the coatings. Some different solidification morphologies, such as planar (at the interface), cellular and dendrite formed, varying from the interface to the surface. Fine microstructures of γ-Co dendrite and lamellar eutectic in dendritical regions strengthened the coatings. Besides, the effects of aged treatment on the microstructure and microhardness of the surface coating were studied. Aged treatment led to the precipitations of some carbide particles (Cr₇C₃ and Co₃C) and boride particles (Co₄B) from the cladded coating, causing an increase in microhardness in the laser-cladded coating.     

深共熔溶剂及其生物催化应用

在绿色化学研究领域,溶剂占据着重要的位置。作为一个绿色溶剂必须满足廉价易得、可生物降解、无毒、可循环使用、无挥发性等标准的要求。但是至今能满足这些要求的溶剂仍然非常有限。近年来,深共熔溶剂（Deep Eutectic Solvents,DESs）被认为可以作为绿色溶剂替代传统的有机溶剂而受到广泛关注。DESs是由两个或多个成分在特定比例下形成的凝固点大大降低室温液态混合物。与离子液体相比,DESs具有廉价、低毒、可生物降解等特点,在许多领域成为研究热点。本文综述了DESs的生物降解性、毒性/细胞毒性及其作为生物催化反应介质的研究现状。基于对研究现状的认识,对DESs未来研究、应用需要解决的问题进行了讨论。作者期望对DESs生物催化应用研究现状的综述更进一步促进DESs研究、应用的发展。