基于智能数据采集器的研究与实现

针对目前各行业数字化、智能化产品应用日趋广泛，数据的获取、传输、分析、应用尤为重要，如何避免采集设备接口单一、功能固定、实用性差等缺点，提出采用ARM嵌入式工控模块M9080-N20为基础，采用VK3266串口芯片扩展UART串行接口，提出基于73K222AU调制解调器、HR219307变压器实现采集器二线模拟通信，并支持以太网、CAN总线和UART串行通信，可以有效解决数据远程采集、传输和控制，适用于特殊环境设备故障检测、诊断和抢修。实验结果证明，智能数据采集器不仅具有多种型号设备故障诊断功能；还能实现野外快速通信组网，不同类型设备数据远程采集、传输、分析和控制功能，在军民融合产品上具有广阔的应用前景和实用价值。     

基于EPL的分布式时钟同步方法

工业以太网协议Ethernet POWERLINK(EPL)分布式站点的时钟同步方法并不能在实时运行过程中保持很高的同步精度,无法满足特定环境下的控制要求。研究了工业以太网协议EPL的两种时钟同步机制,通过数理计算分析了时钟同步误差产生的原因,针对误差较大的缺点,提出了减小误差的方法。通过迭代计算消除了主从站同步报文往返的路径延迟,并设计基于现场可编程门阵列(FPGA)的集线器(Hub)用于EPL菊花链网络拓扑结构,有效地克服了时钟同步报文往返传输延时不一致的缺点,测试结果表明新方法明显优于协议自身的时钟同步方法,对于实现基于EPL的高精度分布式时钟同步网络具有重要意义。     

基于LabVIEW的水下航行器 航行控制系统通信模块设计

为了保证水下航行器的航行安全,航行控制系统内部通信和航行系统与综合控制台之间的通信的性能需要具有较高的实时性和可靠性。本文基于以太网搭建系统,详细地介绍了系统通信的组成和传输数据的类型,结合系统要求以及TCP/IP、UDP通信协议的特点,选取合适的协议和数据传递方式;对于出现通信堵塞和数据包丢失以及链路不稳定情况,采取自动重连和数据自动重发机制;并采用图形化软件LabVIEW的封装函数实现数据的收发和保存,借助LabVIEW和C语言混合编程实现数据的高效处理;在实验室搭建半实物仿真平台进行测试,结果表明,航行控制系统内部以及和综合控制台之间的数据传输准确、可靠。     

High-performance 850 nm vertical-cavity surface-emitting laser in Gigabit Ethernet network

High-performance oxide vertical-cavity surface-emitting (VCSEL) laser is fabricated, and its usefulness is demonstrated as a suitable transmitting light source at 850 nm operating wavelength for Gigabit Ethernet application. Utilization of barrier reduction layers reveals low-threshold current requirement for operation at high modulation bandwidth. The electrical and optical characteristics, measured from the fabricated VCSEL, are simulated for Gigabit Ethernet transmission. Data rates of 1.25 Gbps with a bit error rate of 10⁻¹¹ are achieved by the use of a specific multimode network simulator.     

Cost-Effective Migration from Sub-Lambda to Wavelength-Based Metro Networks

This article will discuss the importance of hybrid coexistence of sub-lambda grooming with wavelength-based services for driving down costs and maximizing the use of metro bandwidth, as well as enabling next-generation lambda-based services. The article will also address migration to all optical metro networks.     

一种可在线更新的PET实时查找表电路的设计与实现

介绍了一种正电子发射断层成像术实时查找表电路。该电路接收符合电路输出的位置信号和能量信号,用查表的方法完成重心法中的除法运算,然后再第二次查表得到该γ光子所入射到的晶格的离散化坐标值和能量阈值,并完成能量甄别以剔除部分散射事件。此外,该电路还结合了呼吸门控和心电门控功能。查找表存储在flash器件中,由CPLD控制读写。本设计的特点是利用硬件电路来完成查找表功能,效率更高,每次事件的查表寻址的延迟时间小于100ns,并且可以在线更新查找表的内容,使用方便。另外,还说明了用CPLD来读写NORflash的方法,以及该电路与系统中其它模块间的数据通信方法。     

Cost-Effective Migration from Sub-Lambda to Wavelength-Based Metro Networks

This article will discuss the importance of hybrid coexistence of sub-lambda grooming with wavelength-based services for driving down costs and maximizing the use of metro bandwidth, as well as enabling next-generation lambda-based services. The article will also address migration to all optical metro networks.     

The Design of Passive Optical Networking+Ethernet over Coaxial Cable Access Networking and Video-on-Demand Services Carrying

Abstract

Video on demand is a very attractive service used for entertainment, education, and other purposes. The design of passive optical networking+Ethernet over coaxial cable accessing and a home gateway system is proposed. The network integrates the passive optical networking and Ethernet over coaxial cable to provide high dedicated bandwidth for the metropolitan video-on-demand services. Using digital video broadcasting, IP television protocol, unicasting, and broadcasting mechanisms maximizes the system throughput. The home gateway finishes radio frequency signal receiving and provides three kinds of interfaces for high-definition video, voice, and data, which achieves triple-play and wire/wireless access synchronously.     

基于FPGA的高速数据传输系统设计与实现

为了满足国家重点专项“量子科学实验卫星”中“量子存储板”高速串行数据传输的测试要求,提出了一种以Nios II嵌入式处理器为控制核心,TLK2711、RS422、USB2.0和千兆以太网为传输接口的高速数据传输解决方案;系统采用TLK2711完成高速数据的串并转换,采用RS422完成命令和控制信号的传输,实现与“量子存储板”的高速数据传输;利用Xilinx公司Zynq-7000芯片独有的ARM+FPGA架构实现千兆以太网完成数据的高速传输,利用EXAR公司XR21V1414 USB转串口芯片实现命令、遥测等数据的传输;采用Labview编写上位机控制整个系统的运行,实现命令发送、指令解析、运行状态显示、数据帧产生、高速数据传输、解析和存储等功能;实测结果表明,此系统数据传输速率高达600 Mbps,满足高速串行数据传输的要求,且具有稳定性高、可靠性好等优点。     

A data transmission method for particle physics experiments based on Ethernet physical layer

Due to its advantages of universality, flexibility and high performance, fast Ethernet is widely used in readout system design for modern particle physics experiments. However, Ethernet is usually used together with the TCP/IP protocol stack, which makes it difficult to implement readout systems because designers have to use the operating system to process this protocol. Furthermore, TCP/IP degrades the transmission efficiency and real-time performance. To maximize the performance of Ethernet in physics experiment applications, a data readout method based on the physical layer(PHY) is proposed. In this method, TCP/IP is replaced with a customized and simple protocol, which makes it easier to implement. On each readout module, data from the front-end electronics is first fed into an FPGA for protocol processing and then sent out to a PHY chip controlled by this FPGA for transmission.This kind of data path is fully implemented by hardware. From the side of the data acquisition system(DAQ),however, the absence of a standard protocol causes problems for the network related applications. To solve this problem, in the operating system kernel space, data received by the network interface card is redirected from the traditional flow to a specified memory space by a customized program. This memory space can easily be accessed by applications in user space. For the purpose of verification, a prototype system has been designed and implemented.Preliminary test results show that this method can meet the requirements of data transmission from the readout module to the DAQ with an efficient and simple manner.