煤直接液化油中混合酚的分离研究

利用分子筛择形特点，对煤直接液化油中的混合酚实施高效分离。本研究选取间甲酚和对甲酚作为分离煤直接液化油馏分段混合酚的模型化合物，采用化学液相沉积法对HZSM-5吸附剂的孔口结构进行改变，分析分子筛硅铝比及颗粒粒径对模型化合物间甲酚和对甲酚吸附分离性能的影响，以获得高性能固相吸附剂，并将其应用于180-190℃馏分段混合酚分离。结果表明，当分子筛硅铝比为25、粒径为3-5 μm时，分子筛的孔口结构调节效果最优；当正硅酸乙酯的最小用量为0.2 mL/g时，固相吸附剂的吸附量为0.03 g/g，对甲酚选择性高于95%。由于外表面沉积物对吸附剂的孔口结构变化，导致对甲酚选择性的提高。进一步采用HZSM-5（1）吸附剂对真实煤直接液化油混合酚的分离中发现，苯酚和对甲酚的选择性均达到100%。     

Autonomous system for data collection: Location and mapping issues in post-disaster environment

Disaster relief requires many resources. Depending on the circumstances of each event, it is important to rapidly choose the suitable means to respond to the emergency intervention. A brief review of the conditions and means demonstrated the usefulness of an autonomous stand-alone machine for these missions. If many techniques and technologies exist, their relevant combination to achieve such a system presents several challenges. This communication tries to outline the possible achievement of an autonomous vehicle under these particular circumstances. This paper focuses on the specific working conditions and welcomes future contributions from robotics and artificial intelligence.In the necessarily limited scope of this article, the authors focus on a particularly critical aspect: location. Indeed, this machine is intended to evolve in heterogeneous and dangerous environment and without any outside contacts that could last up to several days. This blackout, due to the propagation difficulties of electromagnetic waves in the ground, induces an independence of the localisation process and makes the use of any radio navigation support system (GNSS), most of the time, impossible. The knowledge of the position of the system, both for navigation of the autonomous system (Rover) and location of targets (victims buried under debris) must be able to be estimated without contributions from external systems. Inertial classical techniques, odometer, etc., have to be adapted to these conditions during a long period without external support. These techniques also have to take into account that energy optimisation requests the use of low-power processors. Consequently, only poor computing capacity is available on-board.The article starts with a presentation of the context of a post-disaster situation as well as the main missions of Search and Rescue (SaR). It is followed by the analysis of autonomous navigation located in a post-earthquake situation. We will then discuss means to determine the attitude of the autonomous system and its position. The interest of hybridisation with external systems – whenever possible –, will be evaluated with a view to correcting deviations suffered by the system during its mission. Finally, prospects and future work are presented.     

Probability Collectives for Unstable Particles

Unstable particles, together with their stable decay products, constitute probability collectives that are defined as Hilbert spaces with dimension higher than one, nondecomposable in a particle basis. Their structure is considered in the framework of Birkhoff-von Neumann's Hilbert subspace lattices. Bases with particle states are related to bases with a diagonal scalar product by a Hilbert-bein involving the characteristic decay parameters (in some analogy to the n-bein structures of metrical manifolds). Probability predictions as expectation values, involving unstable particles, have to take into account all members of the higher dimensional collective. For example, the unitarity structure of the S-matrix for an unstable particle collective can be established by a transformation with its Hilbert-bein.     

Germanium growth on Br-terminated Si(1 0 0)

The consequences of Ge deposition on Br-terminated Si(1 0 0) were studied with scanning tunneling microscopy at ambient temperature after annealing at 650 K. One monolayer of Br was sufficient to prevent the formation of Ge huts beyond the critical thickness of 3 ML. This is possible because Br acts as a surfactant whose presence lowered the diffusivity of Ge adatoms. Hindered mobility was manifest at low coverage through the formation of short Ge chains. Further deposition resulted in the extension and connection of the Ge chains and gave rise to the buildup of incomplete layers. The deposition of 7 ML of Ge resulted in a rough surface characterized by irregularly shaped clusters. A short 800 K anneal desorbed the Br and allowed Ge atoms to reorganize into the more energetically favorable “hut” structures produced by conventional Ge overlayer growth on Si(1 0 0).     

Generic entangling through quantum indistinguishability

We present a general scheme for entangling any degree of freedom of two uncorrelated identical particles from independent sources by a combination of two-particle interferometry and which-way detection. We show that this entanglement generation procedure works for completely random initial states of the variable to be entangled. We also demonstrate a curious complementarity exhibited by our scheme and its applications in estimating the generated entanglement as a function of wave packet overlap at the beamsplitter.     

纳米颗粒团聚物流化特性的数值研究

基于气固两相流体动力学理论,建立气体纳米颗粒团聚物两相流动双流体模型.模型中采用了Jung ＆ Gidaspow (2002)测量的固相应力模量和王垚等(2001)提出的聚团曳力系数计算模型.对纳米颗粒团聚物的流化过程进行了数值模拟,得到纳米颗粒团聚物的流化特性.模拟得出的床层膨胀比与文献中实验的结果较为接近.     

Role of Bulk Vaporization in the Dynamics of Laser-Induced Erosion Plumes of Metals

In different regimes of exposure of metals to pulsed laser radiation, we show the role played by the liquid-drop phase formed from the target material in a laser-induced erosion plume due to bulk vaporization, in the dynamics of this plume. For some metals, the ranges of power densities of the acting laser radiation, at which the condensed-phase particles influence the passage of laser radiation to the target surface, have been determined experimentally. The mechanism of realization of a low-threshold breakdown has been revealed.     

The glow curve structure for the LiF:Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures

The glow curve structures for LiF:Mg,Cu,Na,Si TL detectors with various dopant concentrations and sintering temperatures were investigated for the improvement of the glow curve structure and sensitivity of the TL detector. The dopant concentrations were varied over the following ranges: Mg (0–0.25 mol%), Cu (0–0.07 mol%), Na and Si (0–1.5 mol%). With increasing Cu concentration, the intensity of the main peak was intensified and reached a maximum at a concentration of 0.05 mol%. The high-temperature peak was reduced. The dependency of the main peak intensity on the Mg concentration exhibits a sharp maximum at 0.2 mol%. The intensity of the high-temperature peak tends to rise slightly with increasing Mg concentration. It was found that the optimum concentrations of the dopants in the LiF:Mg,Cu,Na,Si TL material are Mg: 0.2 mol%, Cu: 0.05 mol%, Na and Si: 0.9 mol%. The dependency of the main peak intensity on sintering temperature exhibits a very sharp maximum at 830°C. The high-temperature peak was rapidly reduced after 825°C.     

Composite Silica Particles Using a Mixture of Organosilane Monomers

Composite silica particles were synthesized by a two-step (acid-base) process in an aqueous solution with a mixture of organoalkoxysilane monomers. The two-step process separates the hydrolysis and condensation procedures to easily control condensation rate. In this study, the silane monomers used were phenyltrimethoxysilane (PTMS), vinyltrimethoxysilane (VTMS), methyltrimethoxysilane (MTMS), and tetraethyl-orthosilicate (TEOS). The physical properties of the resultant composite particles were investigated with the change in the molar ratio of monomers. The size of the particles increased with increasing the molar ratio of R_aSi(OR)₃/R_bSi(OR)₃ or R_aSi(OR)₃/TEOS (R_a: phenyl; R_b: vinyl, methyl).