Human-to-metal electrostatic discharge current measurements – Notes on the ESD current waveform

The Electrostatic Discharge (ESD) phenomenon has been described through the IEC 61000-4-2. ESD current parameters' values, have been set in this Standard. The theoretical ESD current waveform defined in this standard, describing the conventional Contact discharge mode, needs to be re-evaluated on the basis of accurate experimental data. Even though the standard deals with commercial ESD generators, its goal is to simulate the natural phenomenon as good as possible. More and accurate data may contribute to the better simulation of the natural phenomenon. New values and better comprehension of the phenomenon demand new measurements based on high end measuring equipment. Such works and publications have been carried out the past years. Yet, the need to systematize and integrate this work remains. Larger and trust-worthy series of measurements need to be carried out and presented clearly.This paper deals with new ESD-current data, taken with broadband equipment. New and more detailed measurements like these, were never before taken at such a large number of individuals. The goal of this work is that the data acquired can serve as a basis for re-evaluating the conventional approach of the scientific community to the ESD event.In this paper, using a broadband measuring system, new parameters' values are measured and relations are presented, following standard statistical procedures. The results, which occur from measurements carried out on tenths of human individuals, are questioning the Standard in many points. A new way of approaching the standardization of the ESD current is proposed, as the excuse of the poor measuring equipment that sets barriers on the measuring accuracy, does not apply any more. The charging voltages of 500 V and 1000 V were also examined since such range of voltages are often met at ESD events and they are considered very harmful.     

Effective magnetic properties of a composite material with circular conductive elements

Effective magnetic properties of a composite meta-material consisting of periodically arranged circular conductive elements are studied theoretically. A general expression for the effective bulk permeability is obtained with mutual effects and lattice ordering being taken into account. The resonance frequency of the permeability is found to be strongly dependent on the size and shape of the unit cell. Frequency dispersion of the permeability is studied with special attention paid to the frequency range, where negative values of the permeability are possible. Corresponding recommendations for optimisation of the meta-materials with negative permeability are made. The results are confirmed by numerical simulations of the finite structure behaviour in an external magnetic field. Received 19 April 2002 Published online 31 July 2002     

Electromagnetic energy flow near nanoparticles—I: single spheres

The electromagnetic (EM) energy flow near single spheres is investigated by applying Mie theory. From the patterns of the energy flow, the absorption and the scattering of light can be understood in the microscopic point of view. In the absorption profiles of metallic particles, most absorbed energy is consumed on the surface of the particles, which indicates that the resonance of surface plasmon is different from that of the bulk plasmon. Two mechanisms to enhanced local EM field are also distinguished. One is the surface plasmon resonance, and another one is the intensified energy flow.     

High-Q whispering gallery modes in a spherical shell dielectric resonator: Characterization at microwave frequencies

We present a numerical and experimental characterization of high-Q whispering gallery resonant modes excited in a fused quartz spherical shell operated in the 18-26.5 GHz band; easy coupling and selection of modes is a most advantageous feature of the proposed structure with respect to ordinary bulk resonators. The numerical results, based on a finite element algorithm, well match experimental data, which also show the capability of our device to perform gaseous spectroscopy measurements. Received 25 October 2002 Published online 4 February 2003     

Electromagnetic properties of strange baryons in a relativistic quark model

We present some of our results for the electromagnetic properties of excited Σ hyperons, computed within the framework of the Bonn constituent-quark model, which is based on the Bethe-Salpeter approach. The seven parameters entering the model are fitted against the best-known baryon masses. Accordingly, the results for the form factors and helicity amplitudes are genuine predictions. We compare with the scarce experimental data available and discuss the processes in which Σ ^*'s may play an important role.     

Scale invariance rule in electromagnetic scattering

The volume integral equation formalism is used to prove the scale invariance rule for an arbitrarily sized scatterer with an arbitrary shape, morphology, and orientation. The only assumptions are that the scatterer is made of optically isotropic linear materials and is embedded in a homogeneous, linear, isotropic, and nonabsorbing infinite medium.     

激光二极管抽运的GaAs被动Q开关Nd：YVO4激光器

利用固体可饱和吸收体砷化镓（GaAs）作为被动调Q元件，实现了激光二极管抽运平－凹腔掺钕钒酸钇（Nd:YVO4）激光调Q运转，详细测量了砷化镓被动调QNd:YVO4激光输出特性，获得脉宽15ns，重复频率470kHz，光束质量M^2=1.31的激光输出，调Q激光运转阈值为500mW，并数值求解了砷化镓被动调Q速率方程，讨论了被动调Q机理以及调Q脉冲宽度和脉冲重复频率对抽运速率的依赖关系，理论计算结果与实验结果相一致。     

Electromagnetic interference shielding and radiation absorption in thin polypyrrole films

Results of permittivity measurements, electromagnetic interference shielding effectiveness, and heat generation due to microwave absorption in conducting polymer coated textiles are reported and discussed. The intrinsically conducting polymer, polypyrrole, doped with anthraquinone-2-sulfonic acid (AQSA) or para-toluene-2-sulfonic acid (pTSA) was applied on textile substrates and the resulting materials were investigated in the frequency range 1-18 GHz. The 0.54 mm thick conducting textile/polypyrrole composites absorbed up to 49.5% of the incident 30-35 W microwave radiation. A thermography station was used to monitor the temperature of these composites during the irradiation process, where absorption was confirmed via visible heat losses. Samples with lower conductivity showed larger temperature increases caused by microwave absorption compared to samples with higher conductivity. A sample with an average sheet resistivity of 150 Ω/sq. showed a maximum temperature increase of 5.27 °C, whilst a sample with a lower resistivity (105 Ω/sq.) rose by 3.85 °C.     

Study of structural,electromagnetic and dielectric properties of cadmium substituted Ni–Zn nanosized ferrites

Sol-gel auto-combustion method was adopted to prepare Cd²⁺ ions substituted Ni–Zn nanosized ferrites having a chemical formula Ni_0.5Zn_0.5-xCd_xFe₂O₄ (0.0 $\le x\le 0.4)$. Their structural, electromagnetic, and dielectric properties were investigated by using XRD, FE-SEM, EDS, FTIR, VSM, and IS. The XRD analysis revealed a single-phase cubic structure of all samples. The addition of cadmium increased the lattice constant and cell volume of Ni–Zn ferrite due to the difference in the ionic radii between Cadmium (0.97 ?Å) and Zinc (0.74 ?Å). FESEM images showed irregularly shaped grain sizes in the range of 40 to 73 ?nm with random orientations and some agglomeration. The FTIR analysis also confirmed the presence of spinal ferrite phase functional groups in all samples. The saturation magnetization decreased (from 89.51 to 71.32 emu/g) with increasing cadmium content. However, the remanent magnetization and coercivity parameters increased with an increase in cadmium content. The dc resistivity as a function of the temperature of all samples was investigated, and the activation energies were found to be in the range of 0.48 to 0.51 ?eV. The dielectric loss decreased with increasing cadmium content. However, the dielectric constant and dielectric loss tangent (tan) varied non-monotonically with increased cadmium content.