Monte Carlo simulation of electric conductivity for pure and doping fullerene (C60)

In this paper, we have used Monte Carlo (MC) method to simulate and study the temperature and doping effects on the electric conductivity of fullerene (C60). The results show that the band gap has reduced by the doping and the charge carrier transport is facilitated from valence band to conduction band by the temperature where is touched a 300 K. In this case, the conductivity reached a value of $4\times {10}^{-7}\text{S}{\text{cm}}^{-1}$. The electric conductivity of C60 can increase by the triphenylmethane dye crystal violet (CV) alkali metal to reach $4\times {10}^{-3}\text{S}{\text{cm}}^{-1}$ at 303 K. Our results of MC simulation have a good agreement with those extracted from literature [10], [33].     

用于激光推进的高功率激光器的选择

 从激光推进的要求出发，阐述了用于激光推进的高功率激光器的选择原则，即激光器必须满足：（1）高的平均功率和峰值功率；（2）高的单脉冲能量；（3）高的重复频率；（4）优良的大气传输特性。主要分析了目前YAG固体激光器、自由电子激光器和TEA脉冲CO₂激光器的特点，通过上述4个方面性能的比较，认为在目前水平下，TEA脉冲CO₂激光器是进行激光推进的首选强激光源，其优点表现在：功率可达10kW量级，单脉冲能量可达0.5~1kJ，重复频率为20~40Hz；激光波长处于大气传输窗口，对大气变化不敏感；工作物质快速流动，不存在热透镜效应和破坏阈值；相关光学元件易于制造；光束质量较好；运行成本低。     

上海市电力需求的协整与误差修正分析

本文采用协整与误差修正模型技术研究了上海市电力需求的决定因素,建立了上海电力需求函数,检验了电力需求与国内生产总值、电力价格、经济结构、电力使用效率之间的长期均衡关系及短期波动关系。     

Classical, phenomenological analysis of the kinetics of reactions at the gas-exposed surface of mixed ionic electronic conductors

The kinetics of reactions occurring at the gas-exposed surfaces of charged mixed ionic electronic conductors (MIECs) are examined from theoretical first principles. Analysis based on the classical electrochemical potential-transition state theory model reveals that the nature of the reactions is electrochemical in general. However, the influence of the surface potential on the reaction rate is opposite for adsorption and incorporation reactions. Two-dimensional finite volume models of an MIEC as working electrode in a half-cell configuration are presented. The results for a simple, two-step reduction process show that the effect of the surface potential on the rate of reactions is minimal for incorporation-limited reactions but more influential for adsorption-limited reactions. An erratum to this article is available at .     

Determination of the electric field gradient asymmetry from Berry’s phase in NQR of powder samples

An effect of Berry’s phase on the NQR spectrum of the rotating powder sample is described and applied for the determination of the electric field gradient asymmetry. The proposed method involves the analysis of the frequency singularities in the NQR powder patterns of the rotating samples. The Berry’s phases for the eigenstates, associated with an adiabatically changing quadrupole hamiltonian, are calculated for nuclei with a spin I = 3/2 and I = 1 as a function of the asymmetry parameter.     

Molecular electric field mapping of some anions and cations of 2- aminopurine and 6- thioguanine

Electric fields of the anions, cations and neutral forms of 2-aminopurine and 6-thioguanine have been mapped. Certain important features of the maps are similar to those found earlier in the neutral and ionic forms of adenine and guanine. The computed electric field patterns satisfactorily explain reactive sites and biological activity of the molecules.     

Time-marching numerical schemes for the electric field integral equation on a straight thin wire

We derive and analyse four algorithms for computing the current induced on a thin straight wire by a transient electric field. They all involve solving the thin wire electric field integral equations (EFIEs) and consist of a very accurate differential equations solver together with various schemes to approximate the vector potential integral equation. We carry out a rigorous numerical stability analysis of each of these methods. This has not previously been done for solution schemes for the thin wire EFIEs. Each scheme is shown to be stable and convergent provided the radius of the wire is small enough for the thin wire equations to be a valid model.     

Electrospraying: an in-situ polymerisation route for fabricating high macroporous scaffolds

This paper reports a direct jet-based polymerisation by polycondensation approach to forming a self-supporting scaffold structure. The processing technique is electrospraying, which is also known as electrohydrodynamic atomization. A specially formulated ethanolic siloxane sol derived from alkoxysilanes was synthesised and electrosprayed using a ring-shaped ground electrode configuration. The medium was seen to electrospray in the stable cone-jet mode, which later gave rise to the growing or forming of “fir-tree” like structures. The materials were characterised using microscopy, solid state NMR, FTIR, XRD and DSC. Hence this paper explains the direct controlled polycondensation from the siloxane sol and further presents the basis by which these scaffolds take shape.     

用遗传算法拟合电力系统负荷短期预测的非线性模型

本文运用遗传算法，根据河北省１９８５—１９９０年春节期间每小时用电量的统计数字，建立了非线性回归模型（Ｇｏｍｐｅｒｔｄｚ），结果表明，遗传算法性能良好，可望成为电力系统各种非线性模型辨识的有效手段。     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.