Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Change of evaporation rate of single monocomponent droplet with temperature using time-resolved phase rainbow refractometry

Droplet evaporation characterization, although of great significance, is still challenging. The recently developed phase rainbow refractometry (PRR) is proposed as an approach to measuring the droplet temperature, size as well as evaporation rate simultaneously, and is applied to a single flowing n-heptane droplet produced by a droplet-on-demand generator. The changes of droplet temperature and evaporation rate after a transient spark heating are reflected in the time-resolved PRR image. Results show that droplet evaporation rate increases with temperature, from ?1.28$\times {10}^{?8}$ m²/s at atmospheric 293 K to a range of (?1.5, ?8)$\times {10}^{?8}$ m²/s when heated to (294, 315) K, agreeing well with the Maxwell and Stefan–Fuchs model predictions. Uncertainty analysis suggests that the main source is the indeterminate gradient inside droplet, resulting in an underestimation of droplet temperature and evaporation rate. With the demonstration on simultaneous measurements of droplet refractive index as well as droplet transient and local evaporation rate in this work, PRR is a promising tool to investigate single droplet evaporation in real engine conditions.     

对一个力学碰撞问题的讨论

对普通物理力学中有关碰撞的一个问题,从恢复系数e的取值角度出发,进行了详细求解和讨论,得到了更完整的结果.     

电子束产生大尺度等离子体过程的数值模拟研究

建立了一个四组分一维混合模型，对电子束注入大气产生大尺度等离子体的过程进行了数值模拟.结果表明了能量为140keV、流强为50mA/cm²的注入电子束，可以产生线度为0.5m，密度为10¹²cm^-3量级的大气环境下等离子体.电子束所伴随的空间电荷效应由于等离子体的产生会很快消失，不影响后续的等离子体产生过程.电子束注入流强主要影响产生等离子体的密度，而电子束能量则同时影响其空间线度和密度. 关键词： 电子束 碰撞 电离     

The production of slow particles in 16O－Em interactions at 4.5 A GeV/c

A sample of 1233 events is used to study the general characteristics of {}^{16}O－Em interactions at 4.5 A GeV/c. Multiplicity and angular distributions of slow particles and correlations among them are discussed. The present data are compared with the corresponding results from the interactions of other projectiles at the same energy and also the same projectile at different energies. The results indicate that black particle production is independent of the energy and mass of the projectile, but for grey particles it is dependent on the mass of projectile.     

Investigation of the mean free path of projectile fragments produced in 16O－Em collision at 60 A GeV

Results are presented for an investigation of the mean free path of projectile fragments with charge 3≤Z≤8, produced by 60 A GeV {}^{16}O in nuclear emulsion. No dependence of mean free path on the distance from the point of the fragment emission is observed and our result is consistent with the nonexistence of anomalons.     

类铜离子的电子碰撞参数及其规律

用准相对论扭曲波方法系统地计算了Ｂａ、Ｎｄ、Ｇｄ、Ｙｂ、Ａｕ、Ｐｂ类铜离子组态能级之间的电子碰撞激发强度Ω（ｎｌ－ｎｌ），３≤ｎ≤７，４≤ｎ≤７，同时给出了高能极限的碰撞强度和外推到阈值的碰撞强度，用最小二乘样条方法拟合了全能域碰撞强度及热平均速率系数。对于一个激发过程，用１０个参数可以得到碰撞电子在任意能量下的碰撞强度以及任意温度下的速率系数。     

一种改进的计算探测器校正因子的相关抽样方法

对于小尺寸探测器处于大块介质的情形, 在探测器的校正因子的Monte Carlo模拟中, 存在两个难题: 一是由于探测器尺寸很小粒子难以到达探测器并发生碰撞; 二是两个随机变量比值难以达到要求精度. 本文使用经过改进的粒子碰撞自动重要抽样方法, 再结合相关抽样方法, 解决了这两个难题, 并在MCNP-4C程序平台上加以实现. 除了粒子碰撞自动重要抽样以外, 还选用了其他3种方法: 直接模拟、区域分裂、强迫碰撞+Dxtran球分别与相关抽样方法结合, 对一个简化的探测器校正因子计算模型进行了计算. 实际计算结果表明, 相关抽样方法无论与哪种方法结合, 都起到了提高相关量计算效率的作用; 而它与粒子碰撞自动重要抽样结合, 比其他方法具有明显的优越性.     

Axisymmetric Collision Problem for Two Identical Elastic Solids of Revolution

A direct central collision of two identical bodies of revolution is studied. A nonstationary mixed boundary-value problem with an unknown moving boundary is formulated. Its solution is represented by a series in term of Bessel functions. An infinite system of Volterra equations of the second kind for the unknown expansion coefficients is derived by satisfying the boundary conditions. The basic characteristics of the collision process are determined depending on the curvature of the frontal surface of the bodies     

偏滤器靶板磁预鞘层边界的离子流

利用流体力学模型研究了偏滤器等离子体条件下磁预鞘层边界离子流和预鞘层宽度之间的关系，并分析了粒子碰撞对预鞘层边界离子流的影响。由于粒子碰撞对离子的驱动效益，预鞘层边界离子流速度随着预鞘层宽度的增加而减少；只有当预鞘层宽度趋于零时，边界离子流沿磁力线的速度才趋近于离子声速。在固定预鞘层宽度的条件下，计算了预鞘层边界离子流速度与碰撞频率之间的函数关系。