甲酰胺在乙二醇-水混合溶剂中的稀释焓

酰胺是肽的基本结构单元, 而且在蛋白质的二级结构中与酰胺联系的氢键对蛋白质的稳定起着十分重要的作用. 作为蛋白质模型化合物热力学性质研究的一部分, 报道了甲酰胺在乙二醇水溶液中的稀释焓.      

Enthalpies of Dilution of D-p-Hydroxyphenylglycine in Buffer Solutions at Different pH

The effect of pH on the dilution enthalpies of D-p-hydroxyphenylglycine in phosphate buffer solutions has been investigated by isothermal titration microcalorimetry at 298.15 K. The corresponding homogeneous enthalpic interaction coefficients have been calculated according to the excess enthalpy concept. The results show that the enthalpies of dilution of D-p-hydroxyphenylglycine in phosphate buffer solutions at different pH are all positive. The overall trend is that enthalpies of dilution become more positive with an increase of pH, but there is a minimum of the enthalpy of dilution at pH = 7.0. The enthalpic pair interaction coefficients, h ₂, all have negative values. The results are interpreted from the point of view of solute-solute and solute-solvent interactions involved in the solvent effects.     

D-甘露醇与D-山梨醇在氯化钠水溶液中的稀释焓

应用等温流动微量热法测定了298.15 K时互为旋光异构体的D-甘露醇与D-山梨醇在不同浓度的氯化钠水溶液中的稀释焓, 利用 McMillan-Mayer 理论计算了D-甘露醇与D-山梨醇在不同浓度的氯化钠水溶液中的焓对相互作用系数. 结果表明, D-甘露醇和D-山梨醇在氯化钠水溶液中的焓对相互作用系数h2均为正值, h2的值随着氯化钠浓度的增加皆逐渐增大, 但D-山梨醇的焓对相互作用系数h2增大的速率[dh2 /dm(NaCl)]比 D-甘露醇的要大. 根据两多元醇分子构象结构的差异， 溶质-溶质相互作用和溶质-溶剂相互作用对结果进行了解释.     

Enthalpies of Dilution of Aqueous Solutions of NaOH, KOH, and CsOH at 300, 325, and 350°C

Dilution enthalpies, measured using isothermal flow calorimetry, are reported for aqueous solutions of KOH and CsOH at 300°C and 11.0 MPa, 325°C and 14.8 MPa, and for aqueous solutions of NaOH, KOH, and CsOH at 350°C and 17.6 MPa. Previously collected dilution enthalpies for aqueous solutions of NaOH at 300°C and 9.3 MPa and at 325°C and 12.4 MPa were included when fitting the Pitzer parameters. The concentration range of the hydroxide solutions was 0.5–0.02 molal. Parameters for the Pitzer excess Gibbs ion-interaction equation were determined from the fits of the experimental heat data. Equilibrium constants, enthalpy changes, entropy changes, and heat capacity changes for alkali metal ion association with hydroxide ion were estimated from the heat data. For all systems, the enthalpy changes and entropy changes were positive and had accelerating increases with temperature. The resulting equilibrium constants show significant, but smaller, increases with temperature.     

Simultaneous determination of solubility, dissolution and dilution enthalpies of a substance from a single calorimetric experiment

The thermodynamics of dissolution in water of a set of substances has been studied calorimetrically. The examined substances were: potassium chloride, (glycyl-glycyl)diketopiperazine, (alanyl-alanyl)diketopiperazine, (leucyl-glycyl)diketopiperazine. They were chosen on the basis of their solubilities, going from a highly soluble electrolyte to the sparingly soluble diketopiperazines. It is shown that, using a commercially available calorimeter, it is possible to perform in a single calorimetric experiment the simultaneous determination of all thermodynamic parameters characterizing dissolution of a substance in a given solvent, i.e. solubility, dissolution enthalpy and dilution enthalpy. The solubility values in water obtained through the proposed method are in good agreement with those reported in the literature and obtained by other techniques.     

稀释蒸汽中Na+及积炭对甲醇制丙烯催化剂性能影响

考察了稀释蒸汽中Na⁺及积炭对甲醇制丙烯(MTP)催化剂物理化学性质和催化性能影响, 及离子交换后催化性能. 采用X射线衍射(XRD)、扫描电镜(SEM)、X射线荧光(XRF)光谱、N₂吸附-脱附、程序升温氨脱附(NH3-TPD)和热重(TG)分析等方法对失活和再生催化剂进行了表征, 并在101325 Pa、470℃ 和甲醇空速(WHSV)为1.0-3.0 h^-1的反应条件下, 采用连续流动固定床微型反应器考察其催化甲醇制丙烯性能. 结果表明: MTP反应970 h后的催化剂晶体结构和形貌没有受到明显破坏, 但稀释蒸汽中Na⁺极易扩散至催化剂表面,部分取代H质子的位置, 从而使催化剂酸性逐渐下降而中毒失活; 另外, MTP催化剂表面的积炭导致分子筛微孔堵塞是造成其失活的主要原因, 可通过烧炭再生过程消除, 而水蒸汽脱铝对催化剂性能的影响缓慢但更严重. 用再生和离子交换处理后, Na⁺中毒催化剂MTP反应性能基本完全恢复. 在470 h反应过程中, 甲醇转化率保持在99%以上, 丙烯选择性大于46%, 且随着反应时间的延长, 丙烯选择性逐渐升高、乙烯选择性逐渐下降.     

Characterization of dilution action in laser-induction hybrid cladding

Based on an experimental study of laser-induction hybrid cladding by powder feeding, the dilution action and elemental composition distribution were investigated in detail. The results indicate that, compared with individual laser cladding, by using laser-induction hybrid cladding it is easier to form a metallurgical bonding coating and the change range of dilution is much larger. Moreover, at the bottom of molten region, the morphology exhibits nearly a straight line. The processing parameters have great influence on dilution in hybrid cladding. With the increase of scanning speed, the tendency of dilution presents a U-shaped profile, i.e., the middle dilution is much less than those of two ends. The dilution increases with the induction energy. Furthermore, the bigger the dilution, the more uniform is the elemental composition throughout coating. In laser-induction hybrid cladding, the microstructure of low dilution coating is relatively fine due to the low hybrid cladding energy. By adjusting the laser energy and induction energy appropriately, i.e., high induction energy—low laser energy, the low dilution coating with fine microstructure and good mechanical properties can be achieved.     

Determination of three-dimensional solubility parameters of chlorinated polypropylene by ultrasonic degradation

The degradation reactions of chlorinated polypropylene (CPP) in toluene under ultrasonic irradiation were studied. The Mark–Houwink equation acquired from fractional precipitations was also suitable for estimating the molecular weight of degraded CPP. An objective standard was proposed for judging the solution behaviour of CPP in solvents by the study on the relative solubility of CPP before and after degradation. Then Hansen three-dimensional solubility parameters and the total parameter of CPP were obtained by optimization calculation in terms of the criterion proposed here. It was proved that the total parameter of CPP is creditable by the turbidity method. Compared to other standards, the result obtained from the proposed standard accorded well with the standard of complete miscibility suggested by Flory–Huggins for polymers and solvents as well as the objective reality. This standard may provide a reference for other polymers.     

Site-diluted quantum Heisenberg spin model applied to the magnetic properties of Fe–Al disordered alloys

In this work we present a theoretical study of the magnetic behavior of disordered Fe–Al alloys on the basis of a simple-diluted quantum Heisenberg spin model with the assumption that the exchange interaction J depends on the Al concentration q. We calculated the critical temperature and exponents through the mean field renormalization group method. An acceptable fit to the experimental phase diagram for Al concentration in the range 0.30q0.45 is obtained.     

Synthesis, FT-Raman, FT-IR, NMR spectroscopic characterization and antimicrobial activity of new mixed aza-oxo-thia macrocyclic compounds

Series of new mixed aza-oxo-thia macrocyclic ligands {2,6,12,16-tetraaza-1,7,11,17-tetraoxo-9,19-dithia-[(4′-methyl-5′,4,3′)(14′-methyl-15′,14,13′)]ditriazine}cyclocosane (L ₁ ); {2,6,13,17-teraaza-1,7,12,18-tetraoxo-9,10,20,21-tetrathia-[(4′-methyl-5′,4,3′)(15′-methyl-14′,16′,15)]di-triazine}cyclodocosane (L ₂ ); {2,6,14,18-tetraaza-1,7,13,19-tetraoxo-10,22-dithia-[(4′-methyl-5′,3′,4)(16′-methyl-15′,17′,16)]ditriazine}cyclotetracosane (L ₃ ) and {2,6,15,19-tetraaza-1,7,14,12-tetraoxo-10,11,23,24-tetrathia-[(4′-methyl-5′,4,3′)(17′-methyl-8′,17,16′)]ditriazine}cyclohexa-cosane (L ₄ ) were synthesized. The structural features of the compounds have been studied by elemental analyses, Mass, FT-Raman, FT-IR, ¹H and ¹³C NMR spectroscopy. The antimicrobial activities of the ligands were evaluated using disk diffusion method in dimethyl sulfoxide as well as the minimal inhibitory concentration (MIC) dilution method, against 9 bacteria. The obtained results from disk diffusion method were assessed in side-by-side comparison with those of Penicillin-g, Ampicillin, Cefotaxime, Vancomycin, Oflaxacin, and Tetracyclin, well-known antibacterial agents. The results from dilution procedure were compared with Gentamycin as antibacterial and Nystatin as antifungal. The antifungal activities are reported on five yeast cultures namely Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, and Hanseniaspora guilliermondii, and the results are referenced with Nystatin, Ketaconazole, and Clotrimazole, commercial antifungal agents. In most cases, the compounds show strong antifungal activity in the comparison tests.