Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

Corrosion-stable nickel- and cobalt-based alloys for dental applications

In a comparative study the in vitro corrosion behavior of a selection of nickel- and cobalt-based alloys for application in dentistry containing no noble metals was studied with slow scan cyclic voltammetry. The obtained breakthrough potentials, the repassivation behavior and further typical features of the cyclic voltamograms are correlated with the chemical composition as measured with electron beam microanalysis. Surface inhomogenities detected with the latter method are discussed with respect to the electrochemical behavior. For all alloys stabilities in terms of breakthrough potential superior to previously reported data for nickel-base alloys are found.     

Use of the molybdenum-thiocyanate-rhodamine 6G ternary complex for spectrophotometric molybdenum determination without extraction

A modified thiocyanate method without extraction by using rhodamine 6G as a secondary ligand was developed. Molybdenum in 1.0×10⁻² M HCl, after the addition of ascorbic acid, was heated for 10 min in a 90 °C water bath for reduction. Suitable amounts of glycerine, Triton X-100, rhodamine 6G solutions and 2+1 (v/v) 9 M H₂SO₄+3 M KHSO₄ were added in this order. This solution was allowed to cool to room temperature and the absorbance at 570 nm was measured against a reagent blank 45 min after the addition of thiocyanate solution and the second aliquot of Triton X-100 solution. The complex was stable for at least 4 h, the order of reagent addition was important, and thiocyanate should be in large excess. Beer’s law was obeyed over the range 0.9×10⁻⁶ to 1.1×10⁻⁵ M Mo with the molar absorptivity being 1.1×10⁵ l mol⁻¹ cm⁻¹. The R.S.D. for the determination of 0.7 mg Mo l⁻¹ was 1.83% (n=8). Possible interferences of various cations and anions on molybdenum determination were studied. The proposed method was applied to the determination of molybdenum in a dental alloy, Wiron 99.     

HPLC determination of urinary 2,4- and 2,6-toluendiamines as potential degradation products of polyurethane breast implants

Summary A reversed-phase HPLC method has been developed for the urinary determination of mutagenic 2,4- and 2,6-toluendiamines. These amines are degradation products of polyurethane, a material used to cover textured silicone breast implants. FMOC-Cl was used as fluorescent derivatising agent in order to obtain a limit of detection of 15 ng/ml in urine. Pre-treatment of urine samples was by liquid/liquid extraction and urine specimens of patients after surgury were analysed.     

Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.     

STUDY OF THE EFFECT OF TWO BPO/AMINE INITIATION SYSTEMS ON THE FREE-RADICAL POLYMERIZATION OF MMA USED IN DENTAL RESINS AND BONE CEMENTS

ABSTRACT

The kinetics of the free radical bulk polymerization of methyl methacrylate (MMA) was studied by DSC, using the benzoyl peroxide (BPO)/amine initiation system. N,N dimethyl-4-aminophenethyl alcohol (DMPOH), which is a newly synthesized and used amine in the preparation of acrylic dental resins and bone cements was examined, and the results compared to the most commonly used in these applications amine, the N,N dimethyl-p-toluidine (DMT). For both amines, the effect of the molar ratio of BPO/amine and of the reaction temperature, on the polymerization kinetics was investigated. The prepared polymers were characterized by determination of the average molecular weights (M¯ _n and M¯ _w ) and molecular weights distribution (M¯ _w /M¯ _n ) using Gel Permeation Chromatography. DMPOH was found to lead in slightly higher polymerization rates, lower gel times and lower molecular weights than DMT. The values of these parameters for both amines were influenced by the molar ratio of BPO to amine, when the product of the concentrations of these was kept constant. The highest polymerization rate occurred in the lowest gel time, resulting in polymers with the lowest molecular weight, and was observed when a molar ratio of about 1.5 BPO/amine was used. However, the final monomer conversion was found to be independent of the molar ratio and amine used. The activation energy of polymerization was found to be 51.8 kJ/mol K for BPO/DMPOH and 47.1 kJ/mol K for BPO/DMT.     

Imaging the In Vivo Degradation of Tissue Engineering Implants by Use of Supramolecular Radiopaque Biomaterials

For in situ tissue engineering (TE) applications it is important that implant degradation proceeds in concord with neo‐tissue formation to avoid graft failure. It will therefore be valuable to have an imaging contrast agent (CA) available that can report on the degrading implant. For this purpose, a biodegradable radiopaque biomaterial is presented, modularly composed of a bisurea chain‐extended polycaprolactone (PCL2000‐U4U) elastomer and a novel iodinated bisurea‐modified CA additive (I‐U4U). Supramolecular hydrogen bonding interactions between the components ensure their intimate mixing. Porous implant TE‐grafts are prepared by simply electrospinning a solution containing PCL2000‐U4U and I‐U4U. Rats receive an aortic interposition graft, either composed of only PCL2000‐U4U (control) or of PCL2000‐U4U and I‐U4U (test). The grafts are explanted for analysis at three time points over a 1‐month period. Computed tomography imaging of the test group implants prior to explantation shows a decrease in iodide volume and density over time. Explant analysis also indicates scaffold degradation. (Immuno)histochemistry shows comparable cellular contents and a similar neo‐tissue formation process for test and control group, demonstrating that the CA does not have apparent adverse effects. A supramolecular approach to create solid radiopaque biomaterials can therefore be used to noninvasively monitor the biodegradation of synthetic implants.     

The Chemistry of Cyborgs—Interfacing Technical Devices with Organisms

The term “cyborg” refers to a cybernetic organism, which characterizes the chimera of a living organism and a machine. Owing to the widespread application of intracorporeal medical devices, cyborgs are no longer exclusively a subject of science fiction novels, but technically they already exist in our society. In this review, we briefly summarize the development of modern prosthetics and the evolution of brain–machine interfaces, and discuss the latest technical developments of implantable devices, in particular, biocompatible integrated electronics and microfluidics used for communication and control of living organisms. Recent examples of animal cyborgs and their relevance to fundamental and applied biomedical research and bioethics in this novel and exciting field at the crossroads of chemistry, biomedicine, and the engineering sciences are presented.     

Evaluation of hybrid laser-cut and cast miniature fracture specimens

This paper presents a new hybrid laser-cutting method for producing fracture test specimens from thermosetting materials. The hybrid approach combines casting of a sheet of material with subsequent laser-cutting of the test specimens. The new approach was compared to the traditional casting method using a fracture toughness test. For this study, a compact version of the tapered double cantilever beam (cTDCB) was used as a specimen geometry for both manufacturing methods. The cTDCB specimen is crack length independent, and crack length investigations were performed to ensure the crack length independence of the cTDCB specimens. The specimens that were made by the hybrid laser-cut method were found to be comparable to the specimens obtained by the traditional casting method. Moreover, the laser-cut method provides a fast and accurate method to make a significant number of samples in a reasonable time. These tests show that the hybrid laser-cut method could be a good alternative to the traditional casting method.     

Surface characterization of anodized zirconium for biomedical applications

Mechanical properties and corrosion resistance of zirconium make this material suitable for biomedical implants. Its good in vivo performance is mainly due to the presence of a protective oxide layer that minimizes corrosion rate, diminishes the amount of metallic ions released to the biological media and facilitates the osseointegration process.Since the implant surface is the region in contact with living tissues, the characteristics of the surface film are of great interest. Surface modification is a route to enhance both biocompatibility and corrosion resistance of permanent implant materials. Anodizing is presented as an interesting process to modify metal surfaces with good reproducibility and independence of the geometry.In this work the surface of zirconium before and after anodizing in 1 mol/L phosphoric acid solution at a fixed potential between 3 and 30 V, was characterized by means of several surface techniques.It was found that during anodization the surface oxide grows with an inhomogeneous coverage on zirconium surface, modifying the topography. The incorporation of P from the electrolyte to the surface oxide during the anodizing process changes the surface chemistry. After 30 days of immersion in Simulated Body Fluid (SBF) solution, Ca-P rich compounds were present on anodized zirconium.