Synthesis of benzopyran derivatives,XV Preparation of arylsulfonyloxy-2,2-dimethyl-2H-chromenes

Summary Arylsulfonyloxy-2,2-dimethyl-2H-chromenes (26–35) have been synthesized by reduction of arylsulfonyloxy-2,2-dimethyl-4-chromanones (6–15) followed by dehydration.

---

Synthese von Benzopyranderviaten. 15. Mitt.: Darstellung von Arylsulfonyloxy-2,2-dimethyl-2H-chromenen

Zusammenfassung Reduktion von Arylsulfonyloxy-2,2-dimethyl-4-chromanonen (6–15) und anschließende Dehydratisierung liefert Arylsulfonyloxy-2,2-dimethyl-2H-chromene (26–35).

     

Combined use of high resolution TGA with the isoconversion method: Kinetic analysis of the thermal dehydration of KNbWO6·H2O

In the present study was combined the use of high resolution TGA with the isoconversion method, giving us a suitable methodology for determining the stages that occur during a reaction, and providing further insights about the kinetics of the processes involved. As a model reaction was used the thermal dehydration of KNbWO₆·H₂O. The results shown that the dehydration process is controlled by internal water diffusion (intra-crystallite); with activation energy values between 43 and 36 kJ/mol. This value is consistent with a diffusion mechanism dominated by van der Waals attractions. The estimated kinetic parameters are supported with a structural analysis, that suggest lower dimensionality character for water diffusion due to the specific orientations of 〈1 1 0〉 open channels in the pyrochlore framework. This would explain why the two-dimensional (D2) mechanism appears to be the most probable.     

Cyanuric chloride: decent dehydrating agent for an exclusive and efficient synthesis of kinetically controlled isomaleimides

Starting from maleanilic and maleamic acids, a facile general approach to kinetically controlled isomaleimides has been described for the first time using cyanuric chloride as a dehydrating agent with 85-98% yields. The effect of a variety of substituents present on the aromatic ring in amine and maleic anhydride moiety, on these kinetic/thermodynamic dehydration processes of anilic acids has been also described. Under the same set of reaction conditions the phthalanilic acid gave kinetically controlled product, isophtalimide in 91% yield, while the corresponding succinanilic acid furnished the thermodynamically more stable succinimide in high yield.     

Reaction of Ru3(CO)12 with but-2-yn-1,4-diol in CH3OH/KOH solution. Crystal structure of (μ-Cl)Ru3(CO)9[μ3-η-H2CCC(H)CH2]

The reaction of Ru₃(CO)₁₂ with but-2-yn-1,4-diol (HOCH₂CCCH₂OH, BUD) in CH₃OH/KOH followed by acidification with HCl leads to four products, one of which has been identified as the title complex (μ-Cl)Ru₃(CO)₉[μ₃-η⁴-H₂CCC(H)CH₂]. This is an open cluster containing a bridging Cl atom on the open side and a C₄H₅ moiety bound to all the metals. The structure of the complex has been determined by X-ray analysis.The thermal reaction of Ru₃(CO)₁₂ with BUD has been revisited for a comparison with the results in alkaline solution. The main product is the allylic derivative HRu₃(CO)₉[HCCHCCHO].     

Thermal requirements to obtain calcined and frits of ulexite

Ulexite has a substantial amount of hydration water, which allows using calcination methods to increase the B₂O₃ content from 42.97 to 66.69%, due to the loss of 35.54% of its weight, corresponding to its hydration water.In this study, determinations of changes in the heat content at each temperature were made using an isoperibol calorimeter. The mean specific heat was calculated from these values. The reaction enthalpy was also determined by DTA methods.The sample used in the experiments contains 39.04% B₂O₃. The temperature was between 80 and 1000 °C. Curves of weight loss and enthalpy changes are presented and analysed.The results have industrial application in order to determine the thermal requirements for calcining ulexite at different temperatures, as well as its complete dehydration.     

立规聚甲基丙烯酸热表征研究

本文对不同立构的聚甲基丙烯酸(PMAA)进行了热表征。实验结果表明,在30℃～200℃内未出现玻璃化转变。间同PMAA分别在-245℃和-280℃发生脱水反应和脱羧,而全同PMAA只在-185℃观察到脱水反应。这种热稳定性的明显差别与不同立构PMAA链上相邻羧酸距离有关。实验数据证实PMAA脱水反应为无规反应,服从一级动力学反应方程。脱水温度和间同立构含量成正比,脱水反应活化能间同PMAA比全同PMAA高～7Kcal/mol。     

Highly efficient Beckmann rearrangement and dehydration of oximes

Under mild conditions, Beckmann rearrangement of a variety of ketoximes could proceed in the presence of chlorosulfonic acid using toluene as a solvent with excellent conversion and selectivity. This procedure could also be applied in the dehydration of aldoximes for obtaining the corresponding nitriles.     

Silica supported potassium oxide catalyst for dehydration of 2-picolinamide to form 2-cyanopyridine

The dehydration of 2-picolinamide to produce 2-cyanopyridine was investigated thoroughly using silica supported potassium oxide as a heterogeneous catalyst. Both large specific surface area and pore size of SiO_2 (B) contributed to the favorable catalytic performance for the synthesis of 2-CP. In addition, the yield of 2-CP showed the linear relationship with the amounts of medium basicity of the catalysts,demonstrating that medium basic sites were the active sites of silica supported potassium oxide catalysts. The catalysts were further characterized by XRD and FT-IR to clarify the active species. The results indicated the Si—O—K group produced by the reaction of K_2CO_3 with Si—OH was the active species, which was further evidenced by the adjustment of the amount of Si—OH by silylation and hydroxylation procedure.     

Synthesis and characterisation of TlLn(SO4)2·xH2O (Ln=La-Tb)

The compounds TlLn(SO₄)₂·2H₂OLn=La, Ce, Pr, Nd and Tl[Ln(SO₄)₂(H₂O)₃]·H₂OLn=Nd, Sm, Eu, Gd, Tb have been isolated from aqueous solutions of the corresponding sulfates. The dihydrates are all isomorphous and crystallize monoclinic, space groupP2₁/n,Z=4. The compounds which belong to the second type are also isomorphous and crystallize in monoclinic space groupP 2₁/c withZ=4.The dehydration has been studied by thermogravimetry, differential scanning calorimetry and isothermal weight change determination. The dihydrates dehydrate in a single step. For the tetrahydrates the reaction is more complex, however no intermediate phases could be isolated.The unit cell parameters, the dehydration temperatures and the dehydration enthalpies are correlated to the ionic radii ofLn ³⁺.

---

Synthese und Charakterisierung von TlLn(SO₄)₂·xH₂O (Ln=La-Tb)

Zusammenfassung Die Verbindungen TlLn(SO₄)₂·2H₂OLn=La, Ce, Pr, Nd und Tl[Ln(SO₄)₂(H₂O)₃]·H₂OLn=Nd, Sm, Eu, Gd, Tb wurden aus wäßrigen Lösungen der entsprechenden Sulfate isoliert. Die Dihydrate sind alle isomorph und kristallisieren monoklin, RaumgruppeP 2₁/n,Z=4. Die Verbindungen des zweiten Typs sind auch isomorph und kristallisieren in der monoklinen RaumgruppeP 2₁/c mitZ=4.Die Dehydration wurde mit TG, DSC und dem isothermalen Gewichtsverlust untersucht. Die Entwässerung der Dihydrate verläuft in einer Stufe, die von Tetrahydraten aber in mehreren Stufen mit keiner isolierbaren Zwischenphase.Die Gitterkonstanten, die Dehydratations-Temperaturen und -Enthalpien wurden mit den Ionenradien vonLn ³⁺ korreliert.

     

A novel composite chitosan membrane for the separation of alcohol-water mixtures

A novel alcohol dehydration membrane with a three layer structure has been prepared. The top layer is a thin dense film of chitosan (CS), and the support layer is made of microporous polyacrylonitrile (PAN). Between the dense and microporous layer, there is an intermolecular cross-linking layer. This novel composite membrane has a high separation factor of more than 8000 and a good permeation rate of 0.26 kg/m² h for the pervaporation of 90 wt% ethanol aqueous solution at 60°C, 0.8 kg/m² h flux for a n-PrOH/water system and around 1 kg/m² h flux for an i-PrOH/water system using 80 wt% alcohol concentration at 60°C. The separation factor for both cases is more than 10⁵. The separation performance varies with feed composition, operating temperature and conditions of membrane preparation. The results show that the separation factor and flux of this membrane increase with raising the operating temperature. At the same time, the crosslinking layer improves durability of the composite membrane, and the pervaporation performance can be adjusted by changing the structure of the cross-linking layer. The cross section of the composite membrane has been examined by SEM.