硅光电二极管激光损伤阈值随激光脉宽的变化

 对飞秒激光辐照下硅光电二极管损伤阈值进行了实验测量，对从1s到60fs不同脉宽激光辐照下硅光电二极管损伤阈值进行了讨论。实验数据表明，在1s到10ns脉宽范围内损伤所需能量密度近似而非严格地与脉宽的平方根成正比。信号分析表明硅光电二极管的损伤主要由热效应造成，而60fs激光辐照下的损伤阈值为0.1J/cm2，明显偏离普通温度分布预言的趋势。     

Spreading Code Design Using a Global Optimization Method

The performance of a code division multiple access system depends on the correlation properties of the employed spreading code. Low cross-correlation values between spreading sequences are desired to suppress multiple access interference and to improve bit error performance. An auto-correlation function with a distinct peak enables proper synchronization and suppresses intersymbol interference. However, these requirements contradict each other and a trade-off needs to be established. In this paper, a global two dimensional optimization method is proposed to minimize the out-of-phase average mean-square aperiodic auto-correlation with average mean-square aperiodic cross-correlation being allowed to lie within a fixed region. This approach is applied to design sets of complex spreading sequences. A design example is presented to illustrate the relation between various correlation characteristics. The correlations of the obtained sets are compared with correlations of other known sequences.     

Untersuchung des anisotropen Kriechverhaltens vorgeschädigter Werkstoffe am austenitischen Stahl X8 CrNiMoNb 16 16

Übersicht Ziel der Untersuchung ist es, den Einfluß von Kriechschädigung und Belastungsvorgeschichte auf das weitere Kriechverhalten nach einer Änderung der Belastungsrichtung zu bestimmen. Die ermittelten Kriechbruchzeiten werden stark von der Änderung der Belastungsrichtung beeinflußt. Dieses Verhalten wird mit einer tensoriell nichtlinearen Theorie erklärt, indem man den Einfluß der Vorschädigung mit einem zweistufigen Tensor darstellt.

---

     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Thermal effects and band spreading in capillary electro-separation

Summary Four Capillary Electroseparation methods are distinguished. All have an ultimate efficiency limited only by axial diffusion and are in principle capable of achieving 10⁶ plates in <1 hour.The main limitation to performance arises from Ohmic heating of the electrolyte. While forced convection at 10ms^–1 is recommended to keep tubes cool, the parabolic temperature profile within the electrolyte limits the tube bore which can be used. A simple limiting expression is derived: (d_c/m)³ (E/kV m^–1)³ (c/mol dm^–3) <3.3×10⁹.Values of constants underlined     

Damage spreading in a single-component irreversible reaction process: Dependence of the system's immunity on the Euclidean dimension

The spreading of a globally distributed damage, created in the stationary regime, is studied in a single-component irreversible reaction process, i.e., the BK model [Browne and Kleban,Phys. Rev. A 40, 1615 (1989)]. The BK model describes one variant of the A+AA₂ reaction process on a lattice in contact with a reservoir of A species. The BK model has a single parameter, namely the rate of arrival of A species to the lattice (Y). The model, exhibits an irreversible phase transition between a stationary reactive state with production of A₂ species and a poisoned state with the lattice fully covered by A species. The transition takes place at critical points (Y _C ) which solely depend on the Euclidean dimensiond. It is found that the system is immune ford=1 andd=2, in the sense that even 100% of initial damage is healed within a finite healing period (T _H ). Within the reactive regime,T _H diverges when approachingY _C according toT _H (Y _C –Y)^–, with 1.62 and 1.08 ford=1 andd=2, respectively. Ford=3 a frozen-chaotic transition is found close toY _s 0.4125, i.e., well inside the reactive regime 0YY _C 0.4985. Just atY _S the damageD(t) heals according toD(t) t ^–, with 0.71. For the frozen-chaotic transition atd=3 the order parameter critical exponent 0.997 is determined.     

Spreading and compression of n-hexadecyl acrylate at liquid-air interface

Usingn-hexadecyl acrylate, surface pressure-area (F-A) curves and equilibrium spreading pressuresF ^e were measured at various temperatures (5.7°–46°C) by the Langmuir balance (F-A) and the Wilhelmy-plate method (F ^e). At low temperatures (T<13 °C) condensed films and the liquid-condensed/solid condensed transition can be observed. At high temperatures (T>30 °C) liquid-expanded films occur. In the intermediate range the compression curves have two transition points. The transition pressureF ₁ between liquid-expanded and condensed film has a marked temperature dependence. The transition enthalpiesH ₁ decrease with increasing temperature and become zero at 29.2 °C. The second transition is related to a transition between the condensed films (F ₂). The slight temperature dependence of this transition is accompanied by an increasing change of area as well as by increasing transition enthalpiesH ₂.TheF ^e-T curve has two distinct breaks, at the melting pointT _m and atT=30 °C. The break atT _m is due to the melting process and the break atT=30 °C is caused by a phase transition between a liquid-expanded film and a condensed film.The phase diagram was constructed from the transition pressures. It can be demonstrated that the highest pressures of the thermodynamic stable film occurs atT _m. At temperaturesT>T _m equilibrium spreading pressure and equilibrium collapse pressure are identical whereas atT _m supercompression of the monolayer occurs. The film in this state behaves like a supercooled liquid. Obviously, rupture and collapse of such a film lead to a thermodynamically metastable bulk phase.     

Time-dependent mixing and demixing processes in binary lipid monolayers studied by mixed and separate spreading using film pressure and film potential measurements

Using both spreading techniques — mixed spreading and separate spreading- and, simultaneously, film pressure and film potential measurements, the mixing behavior of the following five binary systems was investigated and compared: 1) system 1,2-dilauroyl-phosphatidylethanolamine/cholesterol; 2) system 1,2-dimyristoyl-phosphatidylethanolamine/cholesterol; 3) system 1,2-dipalmitoyl-phosphatidylethanolamine/cholesterol; 4) system Na-eicosyl sulphate/hexadecanol; 5) system phosphatidic acid/1,2-dimyristoyl-phosphatidylethanolamine.Analyzing the time and concentration dependence of the /a isotherms and v/a isotherms (^s = film pressure, v ^s potential,a=average area per molecule in mixed films in the monolayers) of the binary monolayers it can be concluded that the components of the binary systems 1–4 are complete miscible in the monolayers. On the other hand the components of the system 5 are probably partially miscible only.     

Spreading and retraction dynamics of smectic liquid crystal domains at interfaces

The spreading of a liquid drop over liquid subphase can be driven by change in interfacial tension mediated through a surfactant, volatile solvent or photoinduced reaction. In contrast to the spreading dynamics of a liquid drop, a liquid crystal drop with anisotropic structure can lead to interesting behaviour due to its viscoelasticity and anchoring at the interfaces. Recently, we have reported studies on unusual spreading and retraction dynamics of a smectic domain doped with a fluorescent dye in the collapsed state of a Langmuir monolayer. Under epifluorescence microscope, during excitation, a stack of layers of the dye-doped smectic domain gets sheared causing the domain to spread asymmetrically. Further, due to line tension, the domain transforms into a circular shape. We also find the domain size to be about twice that of the initial size. Interestingly, in the absence of excitation, the domain retracts to a smaller area. During retraction of the domain, successive generation of edge dislocation loops arising from a nucleus results in an increase in the domain thickness. The dynamics of spreading and retraction of the domain can be understood by invoking changes in the spreading coefficient due to photoinduced modification of the interfacial tension.     

WATER MOVEMENT CAUSED BY SPREADING SURFACTANTS IN UNSATURATED SYSTEMS OF PARTICLES OF NONUNIFORM SIZE

The movement of water originated by the spreading of two surfactants was analyzed in glass beads as well as on soil systems, both of particles of nonuniform size

The higher difference of surface tension produced in the system by 1 -hexadecanol compared to that of 1-tetradecanol led therefore to a higher amount of water moved. Decreased proportion of the smaller sized particles in glass beads system produced a decrease in the total water moved by both surfactants.

Organic matter acted in soil as a second surfactant in glass beads. This effect was compared in glass beads systems once 1-hexadecanol was evenly distributed among the particles as continuous film, which played a role alike that of organic matter in soil and then a second surfactant 1-tetradecanol was added. These additional surfactant effect diminished the difference between initial and final surface tension (surface tension depression) of the system and so the total water moved.

The soil organic matter (1.7%) modified the water movement curve in the presence of low (0.2g) content of 1-hexadecanol, whereas for high content of either alcohol (0.4g) or low content of 1-tetradecanol content (0.2g) the water movement curves were the same