聚变等离子体中的快离子压强

本文运用Fokker-Planck方程的慢化近似,考虑存在多种离子成份(包括杂质),假定它们具有共同的温度,我们得到了聚变产生的快离子压强的简单封闭形式表示式。表明在典型的工作温度下(～60keV),D-~3He等离子体中聚变产生的快离子压强约为本底热压强的20％,这与D-T等离子体工作在20keV时的比值几乎相同。因此,D-~3He和D-T在它们相应的预期工作温度下,它们各自的快离子压强对总压强的影响是类似的,然而在更高的温度下,这个比值将变得更大。     

Electrochemical characterization of composite membranes based on crown-ethers intercalated into montmorillonite

Oxyethylene macrocyclic compounds (crown-ethers) act as ligands of intracrystalline cations of certain layered silicates as montmorillonites. Stable intercalation materials are formed which are used to prepare organic-inorganic membranes by encapsulating these intercalation compounds with a poly-butadiene thin coating. Electrochemical Impedance Spectroscopy (EIS) is used to study the resulting composite membranes in contact with aqueous electrolytes. From the impedance plots, the ionic resistance of the membranes is obtained. The thickness of the polybutadiene coating is an important factor determining the ability of ions to pass across the membrane. Marked differences in the ionic resistance are observed as a function of the nature of the interlayer macrocyclic compound. For non-intercalated montmorillonite membranes, the ionic resistance is strongly reduced, whereas for some crown-ether intercalated materials such as 18-crown-6 and dibenzo 24-crown-8, iono-selective membranes are obtained. Concerning the nature of the electrolyte, cations exhibiting greater hydration energies show higher difficulties to pass through the membrane and, consequently, the ionic resistance increases.     

THE SEPARATION,PURIFICATION AND DECOLORIZATION OF NEW ANTIBIOTICS-MILUPEINAN USING ADSORPTION RESIN

1. INTRODUCTION Fig.1 The Chemical Structure of Milupeinan As a new type of antibiotics Milupeinan, not only possesses antibacterial activities against a wide range of Gram-positive and Gram-negative bacteria, but also higgh stability under th…     

Synthesis, characterization and thermal studies on cellulose acetate membranes with additive

Cellulose acetate (CA) membranes are used in ultrafiltration applications, although they show low chemical, mechanical and thermal resistance. In order to prepare membranes with improved properties, modification of cellulose acetate with polyethelene glycol (PEG 600) has been attempted. In this study, CA has been mixed with PEG 600 as an additive in a polar solvent. The effects of CA composition and additive concentration given by a mixture design of experiments on membrane compaction, pure water flux, water content and membrane hydraulic resistance have been studied and discussed. The efficiency of protein separation by the developed CA membranes have been quantified using model proteins such as pepsin, egg albumin (EA) and bovine serum albumin (BSA). The thermal stability of the developed membranes prepared with PEG 600 additive has also been investigated using thermogravimetric analysis and differential scanning calorimetry.     

Calorimeters for biotechnology

The isothermal and temperature scanning calorimeters manufactured by Calorimetry Sciences Corporation are briefly described. Applications of calorimetry to determine thermodynamics and kinetics of reactions of interest in biotechnology are described with illustrative examples.     

Improved preparative electrochromatography column design

Improved chromatography column fittings were developed for the efficient and reliable application of an electric field to a preparative chromatography column (a process termed electrochromatography). The improved fittings contained electrodes in close proximity to the column packing media and allowed uniform electric fields to be applied. Membranes in the fittings prevented mixing of the electrode and the column eluent buffers. The membranes prevented gases and electrolytic products generated in the electrode chamber from entering the column eluent buffer. An electrode buffer solution was pumped through the electrode chamber to a large external container. The circulation of buffer through the electrode chamber removed the gases and electrolytic products and ensured a uniform electric field by helping to maintain a constant buffer composition. The membranes prevented macromolecules being separated on the column from coming in contact with the electrodes.     

Electrically conducting electrospun silk membranes fabricated by adsorption of carbon nanotubes

We present a simple method of obtaining electrically conducting electrospun silk non-woven membranes consisting of nanofibers with multi-walled carbon nanotubes (MWCNTs) adsorbed on their surface. Nanofibrous membranes with fibroin diameters of 460 ± 40 nm were formed from aqueous Bombyx mori fibroin solution by electrospinning. The MWCNTs adhered well to the surface of the highly porous silk nanofibrous membranes when Triton X-100 was used as the surfactant for the dispersion of the MWCNTs in aqueous media. The electrical conductivity of the membranes was 2.4 × 10⁻⁴ S/cm due to the presence of the MWCNTs on their surface. In addition, the strong interaction between the MWCNTs and nanofibers keeps them from separating each other, even after ultrasonication. The combination of the high conductivity of the membranes and the simple process used to fabricate them could lead to significant advances in the development of new materials, such as electromagnetic interference shielding or electrostatic dissipation membranes.     

Darstellung, 19F-NMR-spektroskopischer Nachweis und Untersuchung zur Bildung der metallgemischten Clusteranionen [(Mo6−nWnCl)F]2−, n = 0−6

Preparation, ¹⁹F NMR Spectroscopic Evidence and Study of the Formation of Metal-Mixed Cluster Anions [(Mo_6?nW_nCl )F ]^2?, n = 0?6 The complete system of metal-mixed octahedral cluster ions [(Mo_6?nW_nCl)F]^2?, n = 0?6, is prepared by tempering Mo powder with WCl₆ at 600°C. A mixture containing inclusively the geometric isomers (n = 2, 3, 4) all ten possible species is transferred into the tetra-n-butylammonium salts (TBA)₂[(Mo_6?nW_nCl)F]. In the ¹⁹F nmr spectrum the 24 expected signals are observed, assigned on the basis of their chemical shifts, multiplicities and intensities, and confirmed by a 2D-¹⁹F-¹⁹F COSY spectrum. From the integrated intensities the distribution of the different components is derived revealing a non-statistical formation, in that isomers with Mo…?Mo or W…?W atoms in trans-positions in comparision to those with mixed Mo…?W axes are favoured, and that especially the homoleptic compounds Mo₆ and W₆ are present to an over-average extent. Evaluation of ¹⁹F chemical shifts reveals that F bound to W which is in antipodal position to Mo resonates at higher field compared to F bound to W in a W…?W arrangement, caused by an increased shielding, which is synonymous to a positive antipodal-effect by Mo. Vice versa F bound to Mo with an antipodal W resonates at lower field compared with F bound to Mo in an Mo…?Mo arrangement caused by an increased deshielding and synonymous a negative antipodal-effect by W. The chemical shifts, resulting from antipodal-effects, are different for the compounds within the [(Mo_6?nW_nCl)F]^2? - system. The difference of the antipodal effect of successive substitution products results in characteristic values designated as antipodal shift constants, depending on the kind of substituents, which is valid for other cluster systems, too.     

Determination of D- and L-amino acids in biological samples by two-dimensional column liquid chromatography

Summary A two-dimensional, column liquid chromatographic system is used for the determination of the D- and L-enantiomers of amino acids in biological samples. Separation of the amino acids is first on ion-exchange column by gradient elution with a sodium citratesodium chloride buffer. Enantioseparation is by subsequent injection of 3 l heart-cuts of the individual amino acids onto a second column with a chiral crown ether stationary phase. Finally, fluorescence detection is after post-column labelling of the amino acids using ano-phthalaldehyde-2-mercaptoethanol reagent solution. The high separation power and selectivity of the system allow processing of complex samples with hardly any additional treatment and the determination of small quantities of D-amino acids in the presence of excess L-form. Applicability of the system is illustrated by the determination of D- and L-aspartate, serine, glutamate and alanine in various complex biological samples, such as protein hydrolysates, urine and biotechnological and food samples. Data are given on detectability, repeatability and linearity.     

AlSiP3, a compound with a novel wurtzite-pyrite intergrowth structure

AlSiP₃ is formed by heating aluminum and silicon powder with red phosphorus and adding small amounts of iodine or AlCl₃. Small, black crystals with metallic lustre grow at 1200°K. The compound crystallizes in the orthorhombic space group Pmnb (No. 62) with a = 987.2 pm, b = 586.1 pm, c = 608.8 pm and four formula units. In the structure isolated P atoms as well as P₂ pairs are present (PP = 218.2 pm). Silicon is tetrahedrally bonded (SiP = 224.2 ? 228.2 pm) whereas aluminum has octahedral coordination (AlP = 244.2 – 260.8 pm). The structure can be described as an intergrowth structure of wurtzite and pyrite type.