相位校正器粘接局部应力控制技术

通过理论分析,对相位校正器的镜面与支撑结构间的粘接建立模型进行仿真研究,提出了在相位校正器镜片上加工小圆柱,使其粘接应力由镜片本身转移到突出部位的小柱子上,有效改善了相位校正器镜面局部粘接应力,使镜面局部高阶像差得到缓解,并通过试验验证了其有效性。     

盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

非晶调制多层膜Nb/Si中的互扩散研究

利用原位Ｘ射线衍射技术得到非晶调制多层膜Ｎｂ／Ｓｉ中的互扩散系数与退火温度的关系，调制周期Ｌ＝３.２ｎｍ的非晶调制多层膜是用粒子溅射方法制备的．温度范围为４２３—５２３Ｋ的有效互扩散系数通过原位测量多层膜的一级调制峰强度与退火温度之间的关系而得到．利用缺陷陷阱延迟扩散机制解释了所得到的扩散系数与退火温度的关系．建立了可以解释较小前置系数的模型 关键词：     

Recent Experimental Results of HL-1M Tokamak and Progress of HL-2A Project

Recent experimental results of HL-1M tokamak and progress of HL-2A project are presented. Strong fishbone instability was observed during off-axis ECRH. This is first observation of the fishbone instability purely driven by energetic electrons produced by ECRH. The MBI was first proposed and demonstrated on HL-1M. Recently new results of MBI experiment were obtained by increasing the pressure of gas. A stair-shape density increment was obtained with high-pressure multi-pulse MBI just like the density evolution behavior during the multipellet injection. It is shown     

THE -PROBLEM FOR HOLOMORPHIC (0,2)-FORMS ON PSEUDOCONVEX DOMAINS IN SEPARABLE HILBERT SPACES AND D.F.N. SPACES

51. IntroductionL. H5.m.nd..l3] solved the 0problem by using the L2-estimates for partial differentialoperators in C'.. J. Kajiwara[4] studied infinite dimensional generalizations of the poten-tial kernel. Concerning the 0-problem in infinite dimensional spaces, P. ffeb.i.lll] investi-gated the a-equation for coc (o, 1)-forms in arbitrary pseudoconvex open subsets of separableHilbert spaces without growth condition. J. F. Colombeau and B. Perr.t[l1 showed that aCoc solution u of 0u = w ca…     

空气/水界面水分子的取向和运动

对四种不同的实验构型下空气／水界面自由O-H键在3700cm~(-1)的和频振动光谱的分析表明,水分子在空气／水界面的取向运动只可能是在平衡位置附近有限角度之内的受限转动。界面水分子的自由O-H键取向距界面法线约33°,而取向分布或运动的宽度不超过15°。这一图像显著地不同于Wei等人(Phys. Rev. Lett.86,4799(2001))只通过单一的SFG实验构型所得出结论,即：空气／水界面的水分子在超快的振动弛豫时间内在很大的角度范围内运动。     

ZnSe及ZnSe/GaAs异质结构中压力导致的直接禁带向间接禁带的转变

用经验赝势方法计算了体ZnSe以及ZnSe/GaAs单异质结系统中ZnSe外延层г、X、L等特殊对称点导带底能量随压力的变化。结果表明，同Si、Ge、GaAs等半导体材料不同，ZnSe的X点导带底具有正的压力系数，但比г点的压力系数小，这是ZnSe材料以及ZnSe基异质结构材料发生直接禁带向间接禁带的转变时所需转变压力较大的根本原因。研究了ZnSe/GaAs异质结构中晶格失配造成的应变对外延层г、X、L对称点压力系数的影响，表明这种晶格失配造成的应变可以极大地减小ZnSe外延层材料由直接禁带向间接禁带的转变压力。     

Banach空间上有界可逆线性变换逆变换的结构

Fillmore在[1]中得到一个定理:设A,T是Banach空间X上的线性变换,A有界,若Lat(A) Lat(T)且AT=TA,则T是A的多项式.在本文里,以此作为引理,讨论了Banach空间上可逆线性变换A在什么情况下,A-1可表示为A的多项式.本文最主要的结论是定理3.4:设X是Banach空间,A是X上的有界线性变换,且可逆,则A-1是A的多项式当且仅当A-1是A的局部多项式.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.