Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Comparison of fast field-cycling magnetic resonance imaging methods and future perspectives

ABSTRACT

Fast field-cycling (FFC) nuclear magnetic resonance relaxometry is a well-established method to determine the relaxation rates as a function of magnetic field strength. This so-called nuclear magnetic relaxation dispersion gives insight into the underlying molecular dynamics of a wide range of complex systems and has gained interest especially in the characterisation of biological tissues and diseases. The combination of FFC techniques with magnetic resonance imaging (MRI) offers a high potential for new types of image contrast more specific to pathological molecular dynamics. This article reviews the progress in FFC-MRI over the last decade and gives an overview of the hardware systems currently in operation. We discuss limitations and error correction strategies specific to FFC-MRI such as field stability and homogeneity, signal-to-noise ratio, eddy currents and acquisition time. We also report potential applications with impact in biology and medicine. Finally, we discuss the challenges and future applications in transferring the underlying molecular dynamics into novel types of image contrast by exploiting the dispersive properties of biological tissue or MRI contrast agents.     

Optic Fiber Interferometer for Absolute Distance Measurement

1.IntroductionAbsolutedistancemeasurementisfarfromanewtopic.However,itisstillafieldstimulatinggreatinterestsnowadaysduetoitSimportantroleinmanufacturingandassembly['J.SincethegreatsuccessachievedbyMichelsonandBenoitwhentheyfirstdevelopedaninterferometertodeterminethestandardmeterintermsofthemonochromaticredcadmiumline,theopticinterferometerhasbeenprovedtobeoneofthemostpreciseandefficientwayindisplacementmeasurementbecauseofitshighdiscriminationandsimplestructure.However,thetraditionalinterfe…     

93W合金有关力学参量的综合选评

 对93W合金材料进行了超声测量实验，并结合原有的超声测量结果进行了分析比较，提出了可以直接用冲击波速度关系式的三个系数c₀ 、λ和λ′来对钨合金的有关力学参量，如G₀、K₀、G₀′、K₀′等进行综合选评的方法。得到了一组对93W合金较为合理的力学参量推荐值。     

FTIR光谱遥测红外药剂的燃烧温度

本文利用遥感FTIR光谱，对红外药剂的燃烧特性进行了研究。在分辨率为4cm^-1时，收集4700－740cm^-1波段的光谱。从HF等燃烧产物发射的分子振转基带精细结构的谱线强度分布，可以对燃烧温度进行遥感测定，并给出了燃烧温度随时间的变化关系，实验结果表明燃烧表面附近温度梯度很大，存在着急剧的变化温度场，同时也说明，在不干扰火焰温度场的情况下，利用遥感FTIR光谱对剧烈的、非稳态快速燃烧的火焰温度进行连续实时的遥感测量，是一种快速、准确、灵敏度高的测温方法，显示了它在燃烧温度测量、产物浓度测试以及燃烧机理研究等方面的应用前景。     

幅相一致行波管高频电路CAD研究

 在行波管的设计和装配过程中，各部件的尺寸必须严格控制，高频电路参数的离散对行波管色散特性有极大的影响。使用螺旋导电面模型，模拟计算了高频结构各主要参数离散对色散特性和轴向互作用耦合阻抗的影响。分析计算了夹持杆宽度、翼片高度、螺旋线平均半径、螺距、夹持杆介电常数等离散时对色散特性和轴向互作用耦合阻抗的影响，为新型幅相一致行波管的设计和生产提供了很有价值的参考建议。     

用不确定度评价测量结果中的有效自由度的作用

论述了有效自由度的计算方法及有效自由度量值在分析测量结果中的应用。     

红外热像仪参数的双黑体测量装置

对红外热像仪参数双黑体测量装置的工作原理进行了介绍。装置采用双黑体及反射型靶标为温差辐射源，可实现黑体温度温差准直辐射的定期校准和红外热像仪参数测量量值的溯源，也可实现红外热像仪参数的可控性，以及对它进行稳定的、可复现的精确测量。推导出利用红外热像仪参数双黑体测量装置测量信号传递函数SiTF数学模型，分析了红外热像仪参数测量装置的客观因素——仪器常数，针对仪器常数对SiTF测量的影响进行了试验。试验结果表明，仪器常数对红外热像仪SiTF参数测量精度影响较大，并同时影响时域与空域NETD及3D噪声的准确测量。     

“网格式平行线法”在螺纹参数测量中的应用

在计算机视觉理论基础上发展起来的视觉检测(vision inspection)技术具有非接触、速度快、精度适中、可实现在线等优点，已广泛地应用于工业产品的在线检测。在计算机视觉检测技术中CCD摄像机是一个最关键的器件，其参数是否准确决定了检测的精度。所以，摄像机标定是视觉检测技术中最基本的也是最重要的一步。在比较其他标定方法的基础上，为了解决传统标定方法对螺纹图像测量系统所带来的一系列问题，采用了一种新的图像测量系统的标定方法——网格式平行线标定方法，该方法运用了CCD亚像素细分技术及调焦技术，可直接得到纵横2个方向的像素，经过理论分析及实验结果均表明，采用该方法具有标定简单、精度高、重复性好等优点，是一种较好的螺纹图像测量系统标定方法。     

An optical measurement of vortex shape at a free surface

We have proposed an optical method of vortex shape measurement based on Fourier transform profilometry (FTP) and verified it by experiment. The results of our experiment proposed in this paper show that FTP can efficiently reconstruct the vortex shape at a free surface and this method is suitable for wide use in studying such problems as liquid shear flow, wake of an object, flow behind a bluff body, and wetting angle.