Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.     

C1/Ag(111)体系研究 Ⅳ.氯吸附对甲醇吸附氧化的影响

运用HREELS技术对甲醇在预吸附氯的Ag(111)表面上的吸附氧化行为进行了较细致的研究.结果证明Cl对甲醇氧化的影响缘于它在Ag(111)上的吸附所引起的表面结构的改变进而改变表面氧吸附物种,从而使得甲醇氧化的中间产物发生变化.实验结果说明甲醇在Ag(111)和低暴露量氯吸附的Ag(111)表面上的氧化行为是相似的,检测到了中间产物Ⅰ和Ⅲ;在高暴露量氯吸附的Ag(111)上甲醇氧化时则产生中间产物Ⅰ、Ⅳ和甲醛物种.对上述不同的甲醇氧化行为作了分析,并指出了以前人们在考察甲醇氧化机理时只考虑原子氧作用的片面性.     

Comparison of the electrophilic and free-radical addition of halogens with hexafluoro-1,3-butadiene and 1,3-butadiene

Ionic and photochemical reaction of chlorine (Cl₂), bromine (Br₂) and iodine monochloride (ICl) to hexafluoro-1,3-butadiene (1) and 1,3-butadiene (2) were carried out under conditions that would provide product distributions under controlled ionic or free-radical conditions. Product distributions for ionic reaction of Cl₂ and Br₂ with 1 are similar and suggest a weakly-bridged halonium ion species. Theoretical calculations support weakly-bridged chloronium and bromonium ions for both dienes 1 and 2. There are more of the 1,4-dihalo-2-butene products from ionic halogenation of 1 than 2 which correlates with the greater charge density on carbon-4 of halonium ions from 1. Ionic and free-radical reactions of ICl with 1 give 8 and 2% of 3-chloro-4-iodohexafluoro-1-butene and 4-chloro-3-iodohexafluoro-1-butene, respectively. The minor cis-1,4-dihalo-2-butene products from 1 and 2 are reported when formed.     

Studies of the Reaction Behavior of Nitryl Compounds Towards Azides: Evidence for Tetranitrogen Dioxide,N4O2

The reaction behavior of NaN₃, AgN₃, and Me₃SiN₃ towards FNO₂, CINO₂, NO₂SbF₆, and NO₂BF₄ was investigated. At -30°C or below in a solvent-free system sodium azide did not react with CINO₂, NO₂BF₄, or NO₂SbF₆. Below -30°C silver azide did not react either with neat C1NO₂. Treatment of Me₃SiN₃ with pure C1NO₂ led to the formation of C1N₃, N₂O, and Me₃SiOSiMe₃. A mechanism for this reaction has been proposed. Pure chlorine azide was isolated by fractional condensation and identified by its low-temperature Raman spectrum (liquid state). The reaction of Cp₂Ti(N₃)₂ with C1NO₂ also yielded C1N₃ as the only azide-containing reaction product. Treatment of FNO₂ with NaN₃ at temperatures as low as -78°C always ended in an explosion which was probably due to the formation of FN₃ as one of the reaction products. The reaction of NO₂SbF₆ with NaN₃ in liquid CO₂ (-55°C· T· -35°C) as the solvent afforded a new azide species which was stable at low temperature in solution only and was investigated by means of low-temperature Raman spectroscopy. The obtained vibrational data give strong evidence for the presence of tetranitrogen dioxide, N₄O₂, which can be regarded as nitryl azide (NO₂N₃). The structure and vibrational frequencies of N₄O₂ were computed ab initio at correlated level (MP2/6-31 + G^*). In liquid xenon (-100°C· T· -60°C) NaN₃ did not react with NO₂SbF₆. A previous literature report on the preparation of N₄O₂ could not be established.     

A new sensitive and selective fluorescence method for determination of chlorine dioxide in water using rhodamine S

A new simple, selective and sensitive method for the determination of trace chlorine dioxide in water has been developed, based on the oxidation by chlorine dioxide to reduction the fluorescence of rhodamine dyes in ammonia-ammonium chloride buffer solution. Four rhodamine dyes systems such as rhodamine S, rhodamine G, rhodamine B and butyl-rhodamine B were tested. The rhodamine S system is the best, with a linear range of 0.0060-0.450 μg mL⁻¹ and a detection limit of 0.0030 μg mL⁻¹ ClO₂. It was applied to the determination of chlorine dioxide in synthetic samples and real samples, with satisfactory results. This method has good selectivity, especially, other chlorine species such as chlorine, hypochlorite, chlorite and chlorate do not interfere the determination. The mechanism of fluorescence reduction was also considered.     

高效液相色谱法和硫氰酸钾滴定法检测煤中氯的比较研究

比较了测定煤中氯的高效液相色谱(HPLC)法和硫氰酸钾滴定法。以密闭氧弹燃烧或艾氏卡剂熔融分解样品，分别以高效液相色谱法和硫氰酸钾滴定法测定煤中氯，通过对国家标准物质GBW11118、GBW11119、GBW11120分析结果的比较及t检验，表明两方法无显著性差异。     

Cl+F2→ClF+F和F+ClF′→ClF+F′反应机理的密度泛函理论研究

用密度泛函理论（ＤＦＴ）Ｂ３ＬＹＰ方法,在６－３３１Ｇ＊基组下,计算研究了反应Ｃｌ＋Ｆ２→ＣｌＦ＋Ｆ和对称反应Ｆ＋ＣｌＦ’→ＣｌＦ＋Ｆ’的机理。求得前者的过渡态为三角形,活化能为１５．５７ｋＪ·ｍｏｌ＾－１;后者的过渡态为线形和三角形,活化能分别为１１．５２和１９６．２５ｋＪ·ｍｏｌ＾－１。结果均经过振动分析和ＩＲＣ计算验证。     

Covariate model-based fault tree analysis for risk assessment in chemical process industries: A case study of a chlorine manufacturing facility

Fault tree analysis (FTA) is a promising quantitative technique for risk analysis in chemical process industries (CPIs). In FTA, a certain sequence of basic events (causes) leads to one specific Top event (critical event of interest). However, the conventional fault tree analysis has the limitations of staticity and uncertainty. The staticity in conventional FTA arises due to its inability to accommodate time-dependent characteristics of the process system. Whereas uncertainty primarily lies in the failure probability data of basic events. This paper proposes an innovative methodology that uses a time-dependent covariate model to update the failure probability values of major contributing basic events in FTA. A novel subclass of the family of phase-type distributions is used to model the covariates corresponding to the basic events. The newly developed methodology is applied for a case study in a chlorine manufacturing facility to estimate the chlorine release probability. The blockage in the pipeline was identified as the significant reason for chlorine release from expert opinion and sensitivity analysis. The results of the proposed model of FTA are compared with that of conventional FTA.     

电容去离子除氯电极的构建及其脱盐性能研究进展

电容去离子技术(Capacitive deionization,CDI)是一种新兴的脱盐技术,通过在电极两端施加较低的外加电场除去水中的带电离子和分子,由于其较低的能耗和可持续性而备受关注。基于储能电池领域近年来的迅猛发展,CDI电极材料实现了从以双电层作用机理为代表的碳材料到法拉第电极材料的跨越,使得脱盐性能有了大幅度提升。Na⁺的去除与Cl^-的去除同等重要,然而,CDI中针对氯离子高效去除的电极材料研究关注较少。本文从CDI装置的构型演变发展出发,系统地归纳与梳理了CDI中关于脱氯电极材料的分类,对比了不同类型脱氯电极材料的特点,并总结了Cl^-去除的机理,分别为基于双电层的电吸附、转化反应、离子插层和氧化还原反应。本文是首篇关于CDI阳极材料的进展综述和展望,为CDI除氯电极的后续研究提供理论基础和研究思路。     

海水电解面临的挑战与机遇：含氯电化学中先进材料研究进展

氢气是一种清洁高效的能源载体,通过海水电解规模化制备氢气能够为应对全球能源挑战提供新的机遇。然而,缺乏高活性、高选择性和高稳定性的理想电极材料是在腐蚀性海水中连续电解过程的一个巨大挑战。为了缓解这一困境,需要从基础理论和实际应用两方面对材料进行深入研究。近年来,人们围绕电极材料的催化活性、选择性和耐腐蚀性进行了大量的探索。本文重点总结了高选择性和强耐腐蚀性材料的设计合成与作用机制。其中详细介绍了多种电极材料(如多金属氧化物、Ni/Fe/Co基复合材料、氧化锰包覆异质结构等)对氧气生成选择性的研究进展;系统论述了各种材料的抗腐蚀工程研究成果,主要讨论了本征抗腐蚀材料、外防护涂层和原位产生抗腐蚀物种三种情况。此外,提出了海水电解过程中存在的挑战和潜在的机遇。先进纳米材料的设计有望为解决海水电解中的氯化学问题提供新思路。