Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

On the phase CrTe3

A new phase CrTe₃ was discovered and its existence was confirmed by differential thermal analysis and X-ray investigations. Symmetry and lattice parameters as well as the temperature of its peritectic decomposition were determined.

---

Über die PhaseCrTe ₃

Zusammenfassung Eine neue Phase CrTe₃ wurde entdeckt und ihre Existenz wurde mittels differential-thermoanalytischer und röntgenographischer Untersuchungen sichergestellt. Es wurden Symmetrie und Gitterparameter sowie auch die Temperatur des peritektischen Zerfalls bestimmt.

     

Cs3UP2S8, a Coordination Polymer Containing the Unprecedented [U=S]2+ Sulfidouranium(2+) Moiety

Although terminal chalcogeno ligands are well known for the group 5 and 6 transition metals, they are highly unusual for the oxophilic group 4 metals and unknown so far for the lanthanides or actinides. Cs₃UP₂S₈, is the first actinide compound containing a terminal M=S group. It was synthesized by reacting uranium metal, Cs₂S, S, and P₂S₅ in a 4:1:8:3 ratio at 700 °C in an eutectic LiCl/CsCl mixture. The crystal structure was determined by single‐crystal X‐ray diffraction techniques. Cs₃UP₂S₈ crystallizes in the rhombohedral space group R$\bar{3}$ [a = 15.5217(8) Å; c = 35.132(2) Å, V = 8305.0(8) ų, Z = 18]. The crystal structure is based on a tetrahedral network type, wherein the uranium atoms are coordinated by a unusual sulfido moiety and thiophosphate groups in a pseudo‐tetrahedral fashion. The U=S distance of 2.635(3) Å observed in the sulfide moiety is approx. 0.2 Å shorter than the average U–S single bond length, indicating a double‐bond type character.     

三元镍基硫属化物纳米棒阵列的简单合成及其高效的电催化析氧性能北大核心CSCD

通过一步溶剂热法成功合成了泡沫镍(NF)支撑的三元镍基硫属化物(Ni_(3)(Se_(x)S_(1−x))_(2))纳米棒阵列。结构表征结果表明,所得三元Ni_(3)(Se_(x)S_(1−x))_(2)纳米棒属于三方物相,在泡沫镍基底上形成了有序的阵列结构。由于其快速的载流子传输效率、丰富的活性位点和多阴离子的协同效应,Ni_(3)(Se_(0.3)S_(0.7))_(2)/NF纳米棒阵列具有最佳的电催化性能。在1.0 mol/L的KOH溶液中,电流密度为50 mA/cm2时,过电势仅为344 mV,塔菲尔斜率为40.17 mV/dec,同时具有优异的电化学稳定性。更重要的是,以商用Pt/C为阴极,Ni_(3)(Se_(0.3)S_(0.7))_(2)/NF纳米棒阵列为阳极进行全分解水实验,仅需要1.49 V的电池电位即可提供10 mA/cm2的电解电流,表现出良好的电解水效果。该研究为电解水技术领域提供了一种高效的电催化剂,也为电化学能源技术中非贵重电催化剂的合理构建提供了有价值的见解。     

全固态钠离子电池硫系化合物电解质

全固态钠离子电池具有资源丰富、安全性高等优势,作为未来大规模储能的重要选择而成为近年来先进二次电池前沿研究热点。钠离子硫系化合物电解质室温离子电导率高、弹性模量高、容易冷压成型,能增强电极/电解质界面接触、减小界面阻抗、缓冲电极材料在充放电过程中的应力/应变,是全固态钠离子电池的研究重点。本文对钠离子硫系化合物固态电解质的结构及性质进行了总结,讨论了硫系化合物电解质的本征特性、与电极的界面稳定性,并介绍了硫系化合物全固态钠离子电池的研究现状,最后分析了硫系化合物电解质面临的挑战及今后的发展方向。     

Magnetic and electronic properties of NiAs-type chromium chalcogenides

We have computed spin-dependent energy bands, spin moments and density of states of NiAs-type CrX (X=S, Se and Te) chalcogenides using linear combination of atomic orbitals method within density functional theory as well as full potential augmented plane wave method. In addition, magnetic properties have also been computed using spin polarized relativistic Korringa-Kohn-Rostoker method. We have also obtained the first ever theoretical electron momentum densities of CrX compounds considering linear combination of atomic orbitals and compared the results with the isotropic Compton profiles measured using 20 Ci ¹³⁷Cs Compton spectrometer. The Fermi surface topology and magnetic properties are discussed in terms of majority and minority energy bands and density of states. In addition, to highlight the role of Cr (3d) electrons in such type of chalcogenides, we have also reported the magnetic Compton profile of CrTe using the Korringa-Kohn-Rostoker method.     

Analyses of intrinsic inhomogeneity and metal segregation in samples of Ag–Ge–Se glasses

Ge_ySe_(1−y) glasses are semiconductors but when Ag is added above certain threshold concentration, Ag_x[Ge_ySe_(1−y)]_(100−x) glasses behave as fast ionic conductors [Ureña et al., Solid State Ionics 176 (2005) 505]. This peculiar behavior may be attributed to the intrinsically inhomogeneous nature of these glasses where zones rich in metals coexist with zones of the host material. The conductivity transformation may be ascribed to the percolation of the Ag rich phase [Pradel et al., J. Phys.: Condens. Matter 15 (2003) S1561].Ag_x[Ge_0.25Se_0.75]_(100−x) glasses either massive or as films were obtained by melt quenching and pulsed laser deposition (PLD), respectively, in compositions belonging to the Se rich corner of the ternary phase diagram. Their amorphous nature and intermediate range order was checked employing X-ray diffractometry (XRD), the short range order was characterized by extended X-ray absorption fine structure (EXAFS) (Ge and Se K absorption edge) and their microstructure was characterized by scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS).     

Phase transition characteristics of Ge–Sb–Te pseudobinary alloys in laser irradiation measurement

Optical switching and structural transformation of GeTe–Sb₂Te₃ pseudobinary alloys, Ge₂Sb₂Te₅, Ge₁Sb₂Te₄, and Ge₁Sb₄Te₇, were studied for data storage application. As-deposited Ge₂Sb₂Te₅, Ge₁Sb₂Te₄, and Ge₁Sb₄Te₇ thin films were amorphous and they crystallized to FCC and HCP upon heat treatment. Crystallization was accelerated by increasing the proportion of Sb₂Te₃ rather than GeTe in Ge–Sb–Te compounds; this was observed by reflectivity changes under nanosecond laser irradiation in static tester. The different crystallization kinetics according to composition might be affected by the structural incompatibility of GeTe under the ‘Umbrella Flip’ theory.     

Photo-electrochemical properties of multi-layered thin films composed of chalcogenide and superionic conductor glasses

Multi-layered thin films, which consisted of metallic silver, GeSe₃ glass, and silver oxyhalide superionic conductor glass were prepared. Photo- and electrochemical reaction of metallic silver with the chalcogenide glass layer was studied by optical absorbance and cyclic-voltammetry. Photo-doping of silver through the superionic glass layer was observed using evaporated AgI---Ag₂MoO₄ film and it was partly undoped by electrochemical treatment. However, no photo-doping was observed for the cell consisting of a AgI---AgPO₃ dip-coated layer. The doped silver was dissolved into the GeSe₃ layer during the photo-doping process. However, it formed another intermediate compound layer (probably silver selenide) during the electrodoping process.     

An environmental pseudopotential approach to molecular interactions: Implementation in MOLPRO

We present the implementation into the MOLPRO package of a model for the interaction of a central system with its surrounding environment. The properties of a target system enclosed by a noncovalently bound environment or solvent are modeled as those of a system embedded into the effective pseudopotential arising from the exact electrostatic Coulomb potential and the approximated exchange-repulsion potential. For the latter we use the charge-density overlap model, which relates the exchange-repulsion interaction energy between two species with the overlap of their ground-state electron charge densities. The solutions of the modified Hartree-Fock equations for the target system are obtained self-consistently. This way the exchange-induction effects arising from the converged electron-charge density of the embedded system are implicitly included. Inclusion of the correlation effects is provided by the use of post-Hartree-Fock and density-functional techniques available in the MOLPRO package. The computational and conceptual advantages provided by this approach are shown in the calculation of the dipole polarizabilities of halide and chalcogenide anions in different environments.