催化动力学光度法测定水中痕量铁

本文研究了ｐｈ５．０的ＨＡｃ－ＮａＡｃ介质中，痕量铁催化过氧化氢氧化紫脲酸的褪色反应，建立了催化动力学光度法测定痕量铁的新方法，方法的线性范围０－０．４０，０．４０－２．０μｇ／２５ｍＬ，检出限为８×１０＾－１１ｇ／ｍＬ，用于水样中痕量铁的测定，结果满意。     

溶胶-凝胶制备技术与新型催化材料Ⅲ.溶胶粒子表面修饰方法制备催化膜

提出用溶胶粒子表面修饰方法，结合溶胶凝胶技术制备无机催化膜．该方法的基本原理是利用合适的金属配合物在胶粒表面的吸附作用，经溶胶凝胶过程，将活性组分结合到无机膜中．实验测定结果表明：（ＮｉＥＤＴＡ）２－，ＶＯ－３，ＭｏＯ２－４，（Ｐｄ（ＮＨ３）４）２＋，ＰｄＣｌ２－４，ＰｔＣｌ２－６和ＲｈＣｌ３－６可用来修饰ＡｌＯＯＨ溶胶．以Ｐｄ／γＡｌ２Ｏ３催化膜的制备为例，经三次溶胶凝胶过程，可制得无裂缺的厚度为９μｍ的Ｐｄ／γＡｌ２Ｏ３催化膜，膜材料的平均孔直径为６ｎｍ，Ｐｄ被均匀地分布在膜的顶层，其平均粒径为２３ｎｍ．     

Positive photosensitive polyimides with cyclobutane structure

A new family of positive photosensitive polyimide (PPI) systems composed of solvent soluble polyimides (Pls) with cyclobutane (CBDA) structures and diazonaphthoquinone compounds (DNQ) has been prepared. Heat and catalytic imidizations were carried out to obtain CBDA Pls; the former was better than the latter in controlling the molecular weight of the Pl. The ? OH groups in the Pls were easily acetylated during catalytic imidization, so ? COOH groups were selected as weak acidic groups in the Pls. The ? COOH groups were also effective in giving the Pls an alkaline solubility. Therefore, Pls having ? COOH groups were superior to those having ? OH groups for PPI systems. The photosensitive properties of various PPl systems containing ? COOH were found to vary with the fraction of ? COOH groups in the Pls, the content of DNQ in the systems, and the molecular weight of the Pls.     

Al-pillared clays supported rare earths and palladium catalysts for deep oxidation of low concentration of benzene

Al-pillared clays supported rare earths (RE/Al-PILC) are prepared and used as supports of palladium catalysts for deep oxidation of low concentrations of benzene (130-160 ppm). The supports and catalysts are characterized by X-ray powder diffraction (XRD), FT-IR, BET, transmission electron microscopy (TEM) and temperature-programmed reduction (H₂-TPR). The results show that Al-pillaring results in a strong increase in the basal spacing (d_0 0 1) from about 1.2 to 1.8 nm, and an increase in the BET surface area from 63.6 (±3.2) to 238.8 (±11.9) m²/g. Activity tests of deep oxidation of low concentration benzene show catalysts supported on Al-PILC and RE/Al-PILC are obviously more active than that on raw clay. Pd/6% Ce/Al-PILC, in particular, can catalyze the complete oxidation of low concentration benzene at a temperature as low as about 290 °C.     

溴酸钾-亚甲蓝催化光度法测定硝酸盐和亚硝酸盐

用镉柱将NO-3 还原为NO-2 ,利用在磷酸介质中NO-2 对溴酸钾氧化亚甲蓝这一褪色反应具有强烈的催化作用而建立了同时测定痕量硝酸盐和亚硝酸盐的新方法。本方法简便、快速、灵敏 ,对亚硝酸盐和硝酸盐测定的线性范围分别为 0～ 2 0 0 μg·L-1和 0 0 0 3～ 310 μg·L-1,用于测定各种水样中痕量NO-2 和NO-3 的含量均获得满意结果     

PREPARATION AND CATALYTIC ACTIVITY OF BIOACTIVE FIBERS

Two kinds of water-soluble metallophthalocyanines, binuclear cobalt phthalocyanine （Co2Pc2） and binuclear ferric phthalocyanine （Fe2Pc2）, were synthesized through phenylanhydride-urea route and characterized by elemental analysis and FT-IR spectra. Binuclear metallophthalocyanine derivatives （Mt2Pc2） were immobilized on silk fibers and modified viscose fibers to construct bioactive fibers of mimic enzyme. Mt2Pc2 was used as the active center of bioactive fibers, viscose and silk fibers as the microenvironments. The catalytic oxidation ability of bioactive fibers on the malodors of methanthiol and hydrogen sulfide was investigated at room temperature. The experimental results indicated that the catalytic activity of such bioactive fibers was closely correlative to the types ofbioactive fibers and substrates.     

负载型CO3[Fe（CN）6]2及CN^—加氢反应的研究

双金属催化剂是一类重要的多相催化剂。其中d电子在催化活性方面起着重要的作用.本文在Co_3[Fe(CN)_6]_2的工作基础上,进一步研究了该配合物在硅胶、氧化铝、以及氧化镁上的热性质,同时考察了CN~-在Co-Fe体系双端基配位的活化加氢,探讨了载体的影响.     

CATALYSIS OF POLYSTYRENE N-HYDROXYL SULFONAMIDE FOR ESTERIFICATION OF BUTANOL WITH ACETIC ANHYDRIDE

1. INTRODUCTION The development of efficient polymer-supported catalysts has attracted much attention [1]. For obtaining polymeric catalysts, catalytically active groups were introduced onto polymers mostly by copolymerization of the appropriate monomers bearing the desired catalyticfunctionalities (e.g. imidazole, OH, and COOH) or by modification of preformed polymers.Another possibility involves the attachment of side chains, containing the desired arrangement of functional groups, o…     

A biocatalytic route to enantioenriched, sulfanyl aldol products

The aldol products derived from sulfur- or selenium containing acceptors were prepared by kinetic resolution in the presence of antibody 84G3 with enantiomeric excesses ranging from 56 to 70%. Much higher level of enantioselectivity was obtained (enantiomeric excesses all superior to 96%) for sulfanyl aldol products derived from thiomethoxyacetone with three different acceptors.