Wave function mapping of self-assembled quantum dots by capacitance spectroscopy

We use frequency-dependent capacitance–voltage spectroscopy to study the dynamic charging of self-assembled InAs quantum dots. With increasing frequency, the AC charging becomes suppressed, beginning with the low-energy states. By applying an in-plane magnetic field, we generate an additional magnetic confinement that alters the tunneling barrier and hence the charging dynamics. In traveling through the potential barrier, the electrons acquire an additional momentum k₀, proportional to the magnetic field B. As the tunneling is enhanced, when k₀ matches the maximum of the electronic wave function Ψ (in momentum representation), we are able to map out the shape of Ψ by varying B.     

Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

Influence of Gold Nanoparticle Film Porosity on the Chemiresistive Sensing Performance

The porosity of 1‐hexanethiol‐functionalised gold nanoparticle films was assessed and utilised as chemiresistor sensors. Electrochemical capacitance measurements showed that the accessibility of electrolytes of different ionic strengths into the pores depended on the thickness of the electric double layer formed. A large variation in capacitance was measured in 0.01–1000 mM NaClO₄, implying a wide pore size distribution. The change in morphology of the nanoparticle films upon storage in air, water and ethanol for two weeks was investigated. There was a significant decrease in the electrochemical capacitance at high electrolyte concentrations for the ethanol‐stored films compared to the freshly‐prepared films suggesting a decrease in the number of small pores of radii in the range of 0.3–3 nm. This was further supported by optical topographical measurements where a decrease in the thickness of ethanol‐stored films was observed relative to the freshly‐prepared films. The porous nature of the nanoparticle films was found to have an effect on the chemical sensing behaviour. When used as chemiresistor sensors, for the detection of heptane in water, the ethanol‐stored films provided larger resistance changes and longer response times. This suggests that the more densely packed ethanol‐stored films provided more sites that enabled film swelling, and that diffusion of the analyte occurred through the narrower water‐filled pores. This demonstrates the effect of different storage conditions on film morphology and subsequently sensor response.     

Synthesis,characterizations, and electrochemical studies of ZnO/reduced graphene oxide nanohybrids for supercapacitor application

Herein the present article reports the fabrication of ZnO/reduced graphene oxide (ZnG) nanohybrid following a reduction-based process using a non-hazardous material, i.e., ascorbic acid. The morphology, structure, and bonding in the nanohybrid were analyzed using different techniques. Atomic force microscopy and scanning electron microscopy images show spherical particles of ZnO distributed over reduced graphene oxide (rGO). The X-ray diffraction analysis gives calculated values of crystallite size for ZnO as 15.62 nm. The successful incorporation of ZnO nanoparticles into rGO was confirmed using energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses. The electrochemical studies were performed using an electrolyte (0.5 M H₂SO₄). The calculated value of specific capacitance for the nanohybrid was 345 Fg^-1, which was found to be almost double as compared to that of rGO, which is having a value of only 190.5 Fg^-1 at the same scan rate. The nanohybrid also showed excellent capacitance retention after 1,000 cycles.     

Swift heavy ion induced capacitance and dielectric properties of Ni/n-GaAs Schottky diode

The in-situ capacitance and dielectric properties of 25 MeV C⁴⁺ ion irradiated Ni/n-GaAs Schottky barrier diode (SBD) were studied at 100 kHz in the fluence range 5 × 10¹⁰ – 5 × 10¹³ ions/cm². The investigation shows reduction in capacitance and charge density with increase in ion fluence. Consequent changes were observed in other related parameters like conductance, dielectric constant, dielectric loss, loss tangent and electrical modulus. The results were interpreted in terms of generation of swift heavy ion induced acceptor trap states by electronic energy loss mechanism. Besides, the switch over characteristics of depletion to inversion regions in the CV plot reveals minority carrier recombination centers also. The dispersion and relaxation peaks observed in bias dependent dielectric plots were ascribed to the polarization and relaxation mechanism due to the interfacial trap states. The traps and recombination centers were found to alter the barrier characteristics of the fabricated SBD depending upon the ion fluence.     

3D crumbled MXene for high-performance supercapacitors

MXene materials have recently attracted considerable attention in energy storage application owing to their metallic conductivity, 2D structure and tunable surface terminations. However, the restacking of 2D MXene nanosheets hinders the ion transport and accessibility to the surface, resulting in adverse effect on their electrochemical performances. Here, with the assistance of hexamethylenetetramine (C₆H₁₂N₄), 2D Ti₃C₂T_x MXene nanosheets were fabricated into a 3D architecture with crumbled and porous structure through an electrostatic self-assembly followed by annealing. The resultant 3D structure can expose massive active sites and facilitates the ion transport, which is beneficial for sufficient utilization of the outstanding superiorities of the MXene. Therefore, as a pseudocapacitive material, the 3D crumpled and porous Ti₃C₂T_x MXene shows a gravimetric capacitance of 333 F/g at 1 A/g, and maintains 261 F/g and 132 F/g at ultrahigh current densities of 100 A/g and 1000 A/g, respectively, revealing promising potential for application in supercapacitors.     

Photo-electrochemical analysis of passive film formed on X80 pipeline steel in bicarbonate/carbonate buffer solution

Photo-electrochemical measurement was used to explore the formation potential, formation time, chloride ions concentration, applied potential and pH value of the solution on the electronic property of passive film formed on X80 pipeline steel in 1 M NaHCO₃/0.5 M Na₂CO₃ buffer solution. The results showed that the photocurrent is positive, indicating an n-type semiconductor character of the passive film, the photocurrent increased with increasing the formation potential, prolonging the formation time, decreasing chloride ions concentration, rising applied potential and decreasing the pH value of the solution. Capacitance measurement exhibited a positive slope of Mott-Schottky plot, and the slopes of Mott-Schottky plots increased with the increasing formation potential, showing a decrement of the donor density of the passive film.     

The current and capacitance response of radiation-damaged silicon PIN diodes

The current–voltage (I–V) and capacitance–voltage (C–V) characteristics of silicon p–i–n diodes have been investigated both prior to and after radiation-induced damage by 1 MeV neutrons. The results have been analysed and several rates of damage evaluated. The indication is mainly that radiation damage occurs only up to certain fluencies. Beyond these, the material becomes resistant to further damage. Thus, initial heavy radiation damage can be used to achieve radiation-hardness of detector diodes. This result is contrary to previous suggestions that continued irradiation renders the detectors inoperable but is in good agreement with our results on radiation-hardness induced by gold-doping.     

用边界元法分析非均匀介质中的传输线

 从静电场边值问题的积分解出发,推导出用边界元法求解分区均匀介质填充传输线问题的矩阵表达式,给出传输线电容参数的计算公式,介绍用边界元法求解分区均匀介质填充传输线问题的基本原理和求解过程。对两类传输线的计算结果表明：用边界元法求解分区均匀介质填充传输线问题,不仅具有较高的计算精度,而且可以很方便地应用于各类复杂截面分区均匀介质填充传输线问题的工程设计与计算,边界元法是求解分区均匀介质填充传输线问题的一种有效方法。     

壳聚糖制备多孔炭及其在电化学超级电容器中的应用(英文)

以壳聚糖为原料在 600、700、800和900℃直接炭化制备多孔炭 C-600,C-700, C-800 和C-900,其BET比表面积分别为278、461、515和625 m2·g-1.用恒流充放电和循环伏安法表征了其电化学性能. 结果表明, 由 C-800 制备电极的循环伏安图形更接近矩形, 在恒电流充放电实验中阴极和阳极过程基本对称, 说明该电极具有较好的电容性能.在 50 mA·g-1 的电流密度下,C-600、C-700、C-800和C-900的电容分别为96、120、154 和 28 F·g-1.由 C-800 制备电极的循环充放电稳定性好, 电流密度为1 A·g-1循环1000次后电容损失小于2%,说明壳聚糖制备多孔碳具有作为超级电容器电极材料的潜在价值. 同时还考察了不同浓度的电解液对C-800电化学性质的影响,发现在KOH浓度为 30%时的电容最大.依据实验结果,对多孔炭制备及其电化学性质间的关系进行了探讨.