全光纤脉冲压缩器的理论及实验研究

对色散位移光纤＋普通单模光纤构成的全光纤脉冲压缩器进行了理论分析，分析了压 缩效果与光纤参数及输入脉冲参数的关系；对不同中心波长和脉宽的主动锁模光纤激光器的 输出脉冲进行了压缩实验，均得到了近变换限Sech的压缩脉冲，实验结果与理论分析一致. 关键词： 全光纤脉冲压缩器 压缩因子 基座能量 主动谐波锁模光纤 激光器     

A Pseudo-Random Frequency Modulation Continuous Wave Coherent Lidar Using an Optical Field Correlation Detection Method

We propose a new detection method for a pseudo-random frequency modulation continuous wave (RM-CW) coherent lidar. The feature of this method is modulation of local beam with a time delayed pseudo-random sequence. Heterodyne detection and correlation detection between the received beam and the local beam are simultaneously carried out in an optical field. In the RM-CW coherent lidar using the optical field correlation detection method, the received equipment is greatly simplified. We carried out preliminary experiments and demonstrated that the new method is effective for detection of a CW coherent lidar.     

基于阿秒抖动光纤锁模激光器的时钟同步

光纤锁模激光器结构简单, 运转稳定, 且输出的超短脉冲序列具有极高的时钟稳定性, 在抽运探测、脉冲相干合成等要求高精度时钟同步的前沿领域有着广阔的应用前景. 本文通过激光器腔内的电光调制器进行反馈控制, 实现了两台光纤锁模激光器之间的紧密时钟信号同步; 并且通过平衡光学互相关方法, 对残余的时钟误差信号进行了测量, 分辨率达到了13 as. 通过优化激光器的腔内动力学过程及反馈环路的参数, 在[1 Hz, 10 MHz]的积分区间内得到了109 as的残余时钟误差, 对应单台激光器的平均时间抖动为77 as.     

Far infrared sub-nanosecond pulse generation in GaP with a time-synchronized mode-locked double-frequency Nd: Glass laser system

Light pulses of 149 m wavelength and 700 ps duration are generated by non-collinear phase-matched difference frequency mixing of laser pulses at 1053.5 and 1061 nm in a (110) cut GaP crystal. The pump laser pulses are generated in a time-synchronized mode-locked double-frequency Nd:glass laser system consisting of a silicate glass branch and a phosphate glass branch. A photon conversion efficiency of 4 × 10^–6 is achieved. The non-linear susceptibility constant of GaP is determined to be d ₁₄ = (10 ± 1) pm V^–1.     

Performance Test of CW 300?GHz Gyrotron FU CW I

A 300 GHz CW gyrotron FU CW I has been developed and installed in the Research Center for Development of Far-Infrared Region, University of Fukui as a power source of a high frequency material processing system. Its performance was tested and the maximum power of 1.75 kW / CW has been attained at the beam voltage of 15 kV and the beam current of 1A. The maximum window power efficiency of 15.5% has been obtained at the cathode voltage slightly lower than 15 kV. This gyrotron is designed to deliver a Gaussian beam after mode conversion from the oscillation mode TE_22,8 in the cavity with a complex of an internal radiator and beam shaping mirrors. The detailed measurement with an infrared camera has confirmed that a Gaussian beam is radiated when the magnetic field strength B _c at the cavity is adjusted at a proper value. However, within a range of B _c , the output power is emerged into multiple directions, which suggests simultaneous oscillation of competing cavity modes.     

连续锁模Nd∶YVO4激光器实现1 GHz高频输出

LD抽运全固体Nd∶YVO4激光器在连续锁模状态运转下获得了高达1 GHz的重复频率.实验中采用半导体可饱和吸收镜作为锁模元件.利用透过率只有0.8%的输出镜以及可获得较小抽运光斑的2 WLD作为抽运源来优化激光器设计,有效地抑制了调Q锁模状态的运转.低的激光器振荡阈值(35 mW)和连续锁模阈值(0.8 W)显示了饱和吸收体低的插入损耗和激光器合理的设计.在最大抽运1.6 W 时获得了210 mW的平均输出功率.     

微微秒叶绿素染料激光器的研究

本文报道用一台对撞脉冲锁模Nd:YAG激光器的三倍频光作为泵浦光源,采用超短腔结构,获得叶绿素的红色ps脉冲激光输出的装置和实验结果。研究了叶绿素a和b在各种聚合状态下输出激光波长随染料浓度的变化关系,当叶绿素a-乙醇溶液浓度为2×10~(-3)M,激光腔长<36μm时可获得单模调谐ps系列脉冲输出,激光束的发散角≈60mrad。     

半导体可饱和吸收镜实现固体激光器皮秒锁模的机理研究

对半导体可饱和吸收镜(SESAM)实现固体激光器皮秒锁模的机理进行了研究。通过对染料锁模介质和SESAM的结构对比,对SESAM皮秒锁模机理提出了一个新的解释。其在锁模激光器中充当锁模器件时,不仅仅是一个吸收体,同时也是一个增益介质。当腔内增益和损耗保持平衡时实现稳定的连续锁模。     

High power 1341.4 nmNd:YAlO3 CW laser and its performances

A lamp pumped high power 1341.4 nmNd:YAlO₃CW laser and its performances have been described. As high as 188 W of CW output power has been obtained at 1341.4 nm alone line with a overall efficiency of 1.37% and a slope efficiency of 2.14%. The divergence (FWHM) and instability (RMS) of this laser at output power of 155 W are 15 mrad and 1.19%, respectively.     

连续CO2激光对红外窗口材料损伤研究

研究了连续ＣＯ２激光对几种红外窗口材料的表面损伤特性，研究表明，损伤机制在于杂质缺陷吸收造成的热冲击应力破坏。深入研究了杂质缺陷密度、焦斑与材料损伤阈值的关系，并建立了一个损伤模型。同时分析了热冲击应力破坏方式。