晶体X射线衍射实验的数据分析模式

针对粉末X射线衍射谱分析软件CSM的特点,利用CSM软件附带的用户程序库功能,实现了固溶体的物相分析和固溶度的定量计算,扩展了CSM软件的使用范围,提高了物相分析的准确程度.     

DFT-calculated structures based on 1H NMR chemical shifts in solution vs. structures solved by single-crystal X-ray and crystalline-sponge methods: Assessing specific sources of discrepancies

DFT calculations of ¹H NMR chemical shifts, using various functionals and basis sets, the conductor-like polarizable continuum model and discrete solute-solvent hydrogen bond interactions have been used to derive the solution structures of methyl salicylate and methyl 2,5-dihydroxybenzoate. We demonstrate that very good agreement between experimental and computed ¹H NMR chemical shifts can be obtained for various basis sets. The DFT structures in solution were compared with the recently reported X-ray structure, solved by the crystalline-sponge method, of the methyl salicylate and the single-crystal X-ray structure of methyl 2,5-dihydroxybenzoate. It is demonstrated that the information provided by ¹H NMR chemical shifts about the solution structure is significantly more precise than that obtained by the single-crystal X-ray and the crystalline-sponge methods.     

Structural relative stabilities and pressure-induced phase transitions for lanthanide trihydrides REH3 (RE=Sm,Gd, Tb,Dy, Ho,Er, Tm,and Lu)

The structures, structural relative stabilities, pressure-induced phase transitions, and equations of state for lanthanide trihydrides REH₃ (RE=Sm, Gd, Tb, Dy, Ho, Er, Tm, and Lu) are systematically studied using ab initio calculations under a core state model (CSM). The obtained ground-state parameters, such as lattice constants and bulk modulus, agree well with the available data. Among the P6₃/mm, P3?c1, and P6₃cm structures, the P6₃cm structure is found to be the most stable structure for lanthanide trihydride via the comparison of the calculated total energies. With the help of Birch–Murnaghan equation of state, the structural transitions from hexagonal to cubic for REH₃ (RE=Sm, Gd, Ho, Er, and Lu) under pressure are affirmed; especially, the similar behavior of REH₃ (RE= Tb, Dy, and Tm) is reasonably predicted for the first time by this means. For the transitions, the repulsive interactions of H–H atoms may play an important role in terms of the analysis of the structures in the vicinity of the theoretical phase transition.     

AFM‐Correlated CSM‐Coupled Raman/Fluorescence Studies on Selective Interactions of Water Soluble Porphyrins with DNA

The Raman and fluorescence spectroscopic properties of water‐soluble oxo‐titanium(IV) mesotetrakis (1‐methyl pyridium‐4‐yl) porphyrin (O=Ti(TMPyP)⁴⁺) bound with calf thymus DNA and artificial DNAs such as double stranded poly[d(A‐T)₂] and poly[d(G‐C)₂] have been investigated on the single DNA molecule basis by AFM‐correlated confocal scanning microscope (CSM)‐coupled Raman and fluorescence spectroscopic techniques as well as the ensemble‐averaged spectroscopy. The ensemble‐averaged spectroscopic studies imply that the porphyrin interacts with DNA in different groove binding patterns depending on the base pairs. AFM‐images of the different DNAs bound with O=Ti(TMPyP)⁴⁺ were measured, and their morphologies are found to depend on kind of base pairs interacting with O=Ti(TMPyP)⁴⁺. Being correlated with the AFM images, the CSM‐coupled Raman and fluorescence spectral properties of the three different single O=Ti(TMPyP)⁴⁺‐DNA complexes were observed to be highly resolved and sensitive to base pair‐dependent axial ligation of Ti‐O bond as compared to the corresponding ensemble‐averaged spectral properties, which affect the groove binding and its strength of the O=Ti(TMPyP)⁴⁺ with DNA. The axial ligation was found to be accompanied by vibration structural change of the porphyrin ring, leading to keep the shape of double stranded poly[d(A‐T)₂] rigid while poly‐[d(G‐C)₂] and calf thymus DNA flexible after binding with the oxo‐titanyl porphyrin. The base pair dependence of the fluorescence decay times of the DNA‐bound porphyrins was also observed, implying that an excited‐state charge transfer takes place in the G‐C rich major groove in calf thymus DNA. These results suggest that binding of O=Ti(TMPyP)⁴⁺ is more preferential with the G‐C rich major groove than with the A‐T rich minor groove in calf thymus DNA so that the morphology of DNA is changed.     

Hardness and Elastic Modulus Profiles of Hybrid Coatings

Instrumented-indentation testing (IIT) provided with a continuous stiffness measurement (CSM) technique was employed to measure hardness and elastic modulus profiles of thin organic/inorganic hybrid coatings on glass surfaces. Hybrids were synthesized by the hydrolytic condensation of (3-methacryloxypropyl) trimethoxysilane (MPMS) or vinyltrimethoxysilane (VMS), with 5–30 wt% tetraethoxysilane (TEOS), in the presence of formic acid. Coatings of 600–800 nm on glass substrates were obtained by dip-coating solutions of these hybrids with benzoyl peroxide (BPO) addition, and curing in an oven following a thermal cycle up to 120C. Both hardness and elastic modulus showed a maximum value close to the surface, followed by a plateau and a significant increase at higher penetrations. Hybrids based on MPMS and 20–30 wt% TEOS exhibited a good combination of intrinsic values of hardness (0.50 GPa) and brittle index (0.06–0.07), that makes them suitable for coatings of plastic substrates.     

Depth-sensing indentation applied to polymers: A comparison between standard methods of analysis in relation to the nature of the materials

Mechanical data (hardness and elastic modulus) from instrumented indentation testing are often extracted assuming linear elasticity in the initial portion of the unloading. The method is nowadays widely accepted as a convenient tool to interpret depth-sensing data, however it is a matter of controversy when applied to polymer materials due to their time-dependent behavior. More recently, Loubet and co-workers applied continuous stiffness measurements (CSM), consisting of superimposing a small oscillation to the quasi-static component of loading, to the study of the mechanical properties of polymers and proposed a new model to account for the apparent increase in the contact area detected at the first stages of contact. The present work offers a comparative study between the Loubet’s model using CSM and the procedure yielding a single reading from the onset of unloading. A wide range of thermoplastic polymer materials including glassy and semicrystalline polymers have been investigated. The most important equations employed for each method are summarized and the advantages and disadvantages of employing one procedure or the other are discussed. The differences found between the results obtained from both approaches are discussed in relation to the nature of the polymer material. A comparison between mechanical data extracted from indentation measurements and from classical dynamic mechanical analysis is offered.     

Coulomb system equivalent to the energy spectrum of the Calogero-Sutherland-Moser (CSM) model

The purpose of this paper is to prove an equivalence between the energy spectrum of the CSM model and the electrostatic energy of a one-dimensional lattice of quantized point charges interacting via Coulomb potential with Dirichlet boundary conditions. This paper is dedicated to B. Jancovici in honor of his 65th birthday.     

金纳米粒子修饰的手性毛细管电色谱固定相的制备及性能表征

制备了粒径为15 nm的金纳米粒子(GNPs)并将其修饰到氨基衍生化的硅胶整体柱内,通过化学键合法将牛血清白蛋白(BSA)固载到GNPs的表面作为手性固定相。通过透射电子显微镜、扫描电子显微镜等方法进行表征,结果表明,GNPs分散性良好,并被成功地修饰到毛细管柱内,含量高达17.18%。优化了BSA手性柱的制备条件,最终确定了体积分数为10%的3-氨丙基三乙氧基硅烷(APTES)和15 g/L BSA为最佳反应条件。在毛细管电色谱分离模式下,对缓冲液pH值、电压等分离条件进行了考察,最终选择了10 mmol/L pH 7.4的磷酸缓冲液和15 kV运行电压作为最佳分离条件。手性柱对3种手性化合物(色氨酸、阿替洛尔和麻黄碱)有拆分效果,对色氨酸能实现基线分离。与物理吸附法相比,化学键合法制备的手性柱拆分效果好,分析物无需柱前衍生化,且色谱柱稳定性良好。该文的制备方法也为其他类型手性选择剂的引入提供了良好的思路。