How can the Cross-Link Adducts Formed by Novel Trans Platinum Drug be Influenced by Hydrogen Bond

A systematic quantum chemical characterization of intrinsic structure, energies and spectral properties of all the studied cross-link adducts formed by the novel trans platinum with thiazole ligand has been carried out at B3LYP/6-31G^＊ level of theory with the Lanl2dz pseudo potential basis set for the Pt atom. Special attention has been paid to the relative stability of these complexes and the factors that probably alter the order of the relative stability. The important influence of hydrogen bond on the structures, the energies and the spectral property was revealed. Other factors that contribute to relative stability including solvation effect, entropy and electronic delocalization energy were taken into account. The stability energy of the whole complex, and the interaction energy between two purine bases and the [Pt-（NH3）thiazole]^2＋ group were adopted to study the interplay among subsystems and their contribution to relative stability of all the studied cross-link model. Finally, basic spectral properties of these complexes including H（8） chemical shifts of all the studied complexes and the VCD （vibrational circular dichroism） spectra of two pairs of GG chelate enantiomers, were provided in order to define the structure of the most possible duplex bearing novel trans platinum drug lesions.     

Total luminescence intensity (TLI) offers superior early oxidation detection in unstabilised polyethylene but is no better than FT-IR for stabilised polyolefins

In an earlier study, we have shown that chemiluminescence (CL) and the total luminescence intensity (TLI) method are highly sensitive to oxidation in degradable PE. In this study, stabilised PE and PP were characterised with CL in an inert (TLI) and in an oxygen atmosphere (CL-OIT) and the results were compared to those obtained by the commonly used techniques, FT-IR (carbonyl index (CI)) and thermal analysis (DSC-OIT). PE was aged at a low temperature (80 °C) and PP was aged at temperatures between 60 and 120 °C. Non-Arrhenius behaviour was observed in the oxidation of PP. This showed the importance of aging at a low temperature to obtain realistic results. TLI and CI of stabilised PP and most of the stabilised PE gave comparable results with the same sensitivity for oxidation detection. This was in contrast to our previous results for degradable PE. However, TLI of unstabilised PE showed earlier oxidation detection than CI, which agreed with our earlier results. TLI of PE had a higher sensitivity than CL-OIT, and both TLI and CI of PP were sufficiently sensitive to detect the effect of aging at different temperatures, whereas DSC-OIT was not.     

Characterization of thermo-oxidative stability of polymer optical fibers using chemiluminescence technique

The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies.     

静电和疏水效应对TGEV主蛋白酶二聚体稳定性的影响

从TGEV 3CL蛋白酶二聚体结构出发,研究了TGEV 3CL蛋白酶二聚体单体之间的静电和疏水相互作用.蛋白质的静电相互作用通过有限差分方法求解Poisson-Boltzmann方程得到,疏水相互作用通过分析溶剂可及性表面模型得到.考察了不同pH值对TGEV 3CL蛋白酶二聚体静电和疏水相互作用的影响,在pH值为5.5～8.5时,二聚体静电相互作用能、静电去溶剂化能和疏水自由能都较小,表明在该条件下静电和疏水相互作用有利于二聚体的稳定存在,这符合实验结晶所需条件.pH值对静电去溶剂化能的影响大于疏水自由能,表明静电作用是造成强酸或强碱条件下二聚体不能稳定存在的主要原因.     

Dynamic Visualization of Free Radicals at Single Oxygen Bubbles using Chemiluminescence

The generation of free radicals is a key process in the formation and the collapse of the bubbles in water, however, the direct and dynamic observation of the radicals in this process at single bubbles has never been achieved. Here, the hydroxyl (OH^.) and oxygen (O₂^.−) radicals at single oxygen bubbles are continuously traced using chemiluminescence (CL), in which these radicals at the bubble react with the surrounding luminol in the solution emitting the light. Varied increase trends of luminescence are observed in the generation of a bubble, floating, short parking at the water/air interface and the final explosion, revealing the complexity in the distribution of radicals at the bubble unprecedentedly. Despite more radicals are observed at the bubble generated at a deep position under the water for the stabilization, almost the same amount of radicals are included in the bubbles that is independent on the water pressure during the production of the bubble. This rich information collected from the dynamic study of bubbles illustrates the complicated generation and distribution process of radicals at the bubbles, and will facilitate the understanding of the function about the bubbles.     

用偶合反应流动注射化学发光法测定矿样和水样中的痕量铊

将Tl(Ⅲ)置换Co(Ⅱ)-EDTA配合物中的Co(Ⅱ)与Co(Ⅱ)-鲁米诺-H2O2化学发光体系相偶合,建立了流动注射化学发光测定铊的新方法。本方法测定铊的线性范围为3.0×10-6~1.0×10-2mg/mL,检出限为1.0×10-6mg/mL。对1.0×10-4mg/mL的Tl(Ⅲ)标准溶液连续11次测定的相对标准偏差为2.0%。方法可用于矿样和水样中铊的测定。     

纳米金催化Luminol-H_2O_2化学发光体系对异烟肼的测定

碱性条件下,纳米金对Luminol-H2O2化学发光体系有增敏作用,而异烟肼对该化学反应具有强烈的抑制作用。基于此,在优化化学发光反应条件的基础上,提出了一种测定异烟肼的新方法,并对其可能的化学发光机理进行了探讨。该方法测定异烟肼的线性范围为0.005~9.0 mg/L,检出限(3σ)为3.0μg/L,相对标准偏差为3.5%(n=11,ρ=0.2 mg/L)。该法已成功用于药物制剂中异烟肼含量的测定。     

Ag(Ⅲ)配合物-鲁米诺化学发光体系用于文拉法辛的测定

Ag(Ⅲ)配合物在碱性介质中可氧化鲁米诺产生化学发光.实验发现,抗抑郁药物文拉法辛对该化学发光体系有显著的增敏作用.据此,结合流动注射技术,建立了化学发光测定文拉法辛的新方法.在优化条件下,方法的线性范围为0.1～2.0 mg·L-1,检出限(S/N=3)为0.05 mg·L-1,回收率为96％ ～ 105％,相对标准...     

含能材料六硝基六氮杂异伍兹烷分子的B3LYP研究

在B3LYP/6-31G^**水平上对六硝基六氮杂异伍兹烷(CL-20)分子进行结构优化、集居数分析、自然键轨道和振动频率计算,得到与实验值相符的稳定构型.根据计算结果,讨论了键特性对分子性质的影响.     

质子交换膜燃料电池梯度化膜电极

为实现质子交换膜燃料电池的高性能(高功率密度或大电流密度)、低成本(低铂载量)、长寿命发电,人们尝试在燃料电池的核心部件膜电极结构中引入梯度化设计的概念。梯度化膜电极包括膜电极中各组件的梯度化:气体扩散层的PTFE含量与孔隙率的梯度化,催化层的催化剂与Nafion用量的梯度化以及微孔层的疏水性与孔隙率的梯度化。梯度化膜电极中催化剂分布、孔隙率分布、亲/疏水性分布合理,具有良好的三相反应界面以及质子、电子、反应气体、水等多相物质高效传输通道,从而能满足在低铂载量、低加湿以及高电流密度条件下高性能稳定工作。本文整理了近几年来有关燃料电池梯度化膜电极研究的相关文献,梳理了梯度化膜电极研究发展脉络,归纳总结了各种梯度化膜电极的制备方法、性能以及构效关系,并展望了梯度化膜电极下一步研究方向,对高性能、低成本、长寿命的燃料电池开发具有指导意义。