Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

IMMOBILIZATION OF POTENTIALLY BIOACTIVE MOIETIES ONTO POLYETHER WITH POLY(ETHYLENE GLYCOL)-SULFONATE SPACER

A new reactive graft copolymer, poly(tetramthylene glycol) - graft-w-propyl sodiumsulfonate-poly(ethylene glycol) (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+), was synthesizedby the cationic polymerization of a-w-bifunctional PEG macromonomer (O?CH_2—PEG——CH_2 CH_2 CH_2 SO_3 Na) and THF. The obtained copolymer exhibits the expected structureas indicated by the result of characterization. Two amino acids (L-arginine, L-tyrosine)were covalently attached to the copolymer after converting the sulfonate group to sulfonylchloride. So the new reactive graft copolymer (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+) isexpected to be very useful in attachment of potentially bioactive moieties to polymer viaa hydrophilic PEG spacer.     

Synthesis and characterization of biocompatible poly (L-lactide) using zinc (II) salen complex

Abstract

A biocompatible zinc (II) complex based on a tetradentate N,N,O,O-type salen ligand was synthesized, characterized and used for the solvent-free ring-opening polymerization (ROP) of L-lactide in bulk at 180?°C to prepare high molecular weight poly(L-lactide) (M_n : 82,600?Da; M_w : 140,000?Da; PDI: 1.70). Poly(L-lactide) (PLLA) was characterized using FTIR, ¹H NMR, ¹³C NMR, GPC, TGA, DSC, WAXD, and MALDI-ToF. Kinetic measurement was carried out and first-order behavior to monomer was observed. The k _app was found as 6?±?0.001?×?10^?4?s^?1. The biocompatibility of the PLLA was confirmed by in vitro cytotoxicity against NIH/3T3 fibroblast cell line and can be used in biomedical applications.     

One injection for one-week controlled release: In vitro and in vivo assessment of ultrasound-triggered drug release from injectable thermoresponsive biocompatible hydrogels

Episodic release of bioactive compounds is often necessary for appropriate biological effects under specific physiological conditions. Here, we aimed to develop an injectable, biocompatible, and thermosensitive hydrogel system for ultrasound (US)-triggered drug release. An mPEG-PLGA-BOX block copolymer hydrogel was synthesized. The viscosity of 15 wt% hydrogel is 0.03 Pa*s at 25 °C (liquid form) and 34.37 Pa*s at 37 °C (gel form). Baseline and US-responsive in vitro release profile of a small molecule (doxorubicin) and that of a large molecule (FITC-dextran), from the hydrogel, was tested. A constant baseline release was observed in vitro for 7 d. When triggered by US (1 MHz, continuous, 0.4 W/cm²), the release rate increased by approximately 70 times. Without US, the release rate returned to baseline. Baseline and US-responsive in vivo release profile of doxorubicin was tested by subcutaneous injection in the back of mice and rats. Following injection into the subcutaneous layer, in vivo results also suggested that the hydrogels remained in situ and provided a steady release for at least 7 d; in the presence of the US-trigger, in vivo release from the hydrogel increased by approximately 10 times. Therefore, the mPEG-PLGA-BOX block copolymer hydrogel may serve as an injectable, biocompatible, and thermosensitive hydrogel system that is applicable for US-triggered drug release.     

Advances in the scaffolds fabrication techniques using biocompatible polymers and their biomedical application: A technical and statistical review

With the advancement in tissue engineering, researchers are working hard on new techniques to fabricate more advanced scaffolds from biocompatible polymers with enhanced porosity, appropriate mechanical strength, diverse shapes and sizes for potential applications in biomedical field in general and tissue engineering in particular. These techniques include electrospinning, solution blow spinning, centrifugal spinning, particulate leaching (salt leaching), freeze-drying, lithography, self-assembly, phase separation, gas foaming, melt molding, 3-D printing, fiber mesh and solvent casting. In this article we have summarized the scaffold’s fabrication techniques from biocompatible polymers that are reported so far, the recent advances in these techniques, characterization of the physicochemical properties of scaffolds and their potential applications in the biomedical field and tissue engineering. The article will help both newcomers and experts working in the biomedical implant fabrication to not only find their desired information in one document but also understand the fabrication techniques and the parameters that control the success of biocompatible polymeric scaffolds. Furthermore, a static analysis of the work published in all forms on the most innovative techniques is also presented. The data is taken from Scopus, restricting the search to biomedical fields and tissue engineering.     

Green synthesis of biogenic metal nanoparticles by terrestrial and aquatic phototrophic and heterotrophic eukaryotes and biocompatible agents

The size, shape and controlled dispersity of nanoparticles play a vital role in determining the physical, chemical, optical and electronic properties attributing its applications in environmental, biotechnological and biomedical fields. Various physical and chemical processes have been exploited in the synthesis of several inorganic metal nanoparticles by wet and dry approaches viz., ultraviolet irradiation, aerosol technologies, lithography, laser ablation, ultrasonic fields, and photochemical reduction techniques. However, these methodologies remain expensive and involve the use of hazardous chemicals. Therefore, there is a growing concern for the development of alternative environment friendly and sustainable methods. Increasing awareness towards green chemistry and biological processes has led to a necessity to develop simple, cost-effective and eco-friendly procedures. Phototrophic eukaryotes such as plants, algae, and diatoms and heterotrophic human cell lines and some biocompatible agents have been reported to synthesize greener nanoparticles like cobalt, copper, silver, gold, bimetallic alloys, silica, palladium, platinum, iridium, magnetite and quantum dots. Owing to the diversity and sustainability, the use of phototrophic and heterotrophic eukaryotes and biocompatible agents for the synthesis of nanomaterials is yet to be fully explored. This review describes the recent advancements in the green synthesis and applications of metal nanoparticles by plants, aquatic autotrophs, human cell lines, biocompatible agents and biomolecules.     

Preparation and characterization of biocompatible magnetic carbon nanotubes

Magnetic carbon nanotubes consisting of multi-wall carbon nanotubes (MWNTs) core and Fe₃O₄ shell were successfully prepared by in situ thermal decomposition of Fe(acac)₃ or FeCl₃ or Fe(CO)₅ in 2-pyrrolidone containing acid treated MWNTs at 240 °C with the protection of nitrogen gas. The samples were characterized by TEM, XRD, SEAD, XPS and superconducting quantum interference device. Also, their biocompatibility was compared with naked carbon nanotubes. The results showed that after coated with Fe₃O₄ nanoparticles, the obtained magnetic carbon nanotubes show superparamagnetic characteristic at room temperature, and their blocking temperature is about 80 K. The magnetic properties of the nanotubes are relevant to the content of magnetic particles, increasing content of magnetic nanoparticles leads to higher blocking temperature and saturation magnetization. The results of antimicrobial activities to bacterial cells (Escherichia coli) showed that the MWNTs have antimicrobial activity, while the magnetic nanotubes are biocompatible even with a higher concentration than that of MWNTs.     

Biocompatible microcapsules with a water core templated from single emulsions

We use single emulsions as templates to fabricate monodisperse biocompatible microcapsules with a water core. These microcapsules are fabricated using FDA-approved polymer and non-toxic solvents and are of great use in drugs, cosmetics and foods.     

生物相容性聚碳酸酯聚氨酯微纤维人工血管的研究

以分子量为2000的聚碳酸酯(PCDL)、1,4-丁二醇(BD)和4,4-二环己基甲烷二异氰酸酯(H12MDI)为原料合成出了一系列聚碳酸酯聚氨酯(PCU)。通过NMR、红外(FT-IR)、拉力实验、差示扫描量热仪(DSC)表征了该聚氨酯的化学结构、机械性能和热性能。在25度时,PCU的杨氏模量随硬段含量增加而略有升高。在有酶催化和没有酶的条件下,考察了材料的降解性能,发现吸水率和重量损失分别低于4%和1%。细胞毒性和血液相容性检测表明材料是生物相容、无毒的。经过喷纺技术制备的人工血管具有微孔结构,初步进行体内植入研究,PCU血管具有超细纤维交联的结构,并提供开放孔。研究结果表明聚碳酸酯聚氨酯具有优异的物理性能、高生物稳定性和良好的生物相容性,因此聚碳酸酯聚氨酯是人工血管合适材料。     

Preparation of analyte-sensitive polymeric supports for biochemical sensors

The preparation and use of multiple polymers attached to a surface plasmon resonance (SPR) sensor for optimization of signal enhancement and minimization of fouling during sensing of biological species has been achieved. These polymers are advantageous compared to the current practice of carboxymethylated-dextran (CM-dextran). The polymers offer a wide range of functionalities and different molecular weights. Using these polymers, the SPR sensors can be fabricated as fast or faster than the CM-dextran sensor. In this study, we investigated the use of nine polymers for SPR biosensors. Polysaccharides, including CM-dextran, CM-hyaluronic acid, hyaluronic acid, and alginic acid, were investigated. Humic acid, polylactic acid, polyacrylic acid, orthopyridyldisulfide-polyethyleneglycol-N-hydroxysuccinimide (OPSS-PEG-NHS) and a synthesized polymer; polymethacrylic-acid-co-vinyl-acetate (PMAVA), were also used. The polymers were chemically attached to a thiol monolayer on the SPR biosensor using carbodiimide chemistry. The polymers were functionalized for binding of anti-myoglobin (anti-MG). The sensor performance was measured using myoglobin (MG) at 25 ng ml⁻¹, a biologically relevant level for myocardial infarction detection. Most polymers offered similar performance to CM-dextran for MG detection in HEPES buffer saline pH 7.4 (HBS). In preliminary studies in bovine serum, each of the candidate polymers demonstrated better performance than CM-dextran.