Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.     

Adsorptive Stripping Differential Pulse Voltammetric Determination of Risperidone with a Multi‐Walled Carbon Nanotube‐Ionic Liquid Paste Modified Glassy Carbon Electrode

A new composite electrode has been fabricated based on coating multi‐walled carbon nanotubes (MWCNTs) and n‐octylpyridinum hexafluorophosphate (OPPF₆) ionic liquid composite on a glassy carbon (GC) electrode (OPPF₆‐MWCNTs/GCE). This electrode shows very attractive electrochemical performances for electrooxidation of risperidone (RIS) compared to conventional electrodes using carbon and mineral oil, notably improved sensitivity and stability. The oxidation peak potentials in cyclic voltammogram of RIS on the OPPF₆‐MWCNTs/GCE was occurred around 230 mV vs. SCE at Britton–Robinson (B–R) buffer (pH 4.0) at scan rate of 100 mV s^?1. The electrochemical parameters such as diffusion coefficient (D), charge transfer coefficient (α) and the electron transfer rate constant (k/_s) were determined using cyclic voltammetry. Under the optimized conditions, the peak current was linear to risperidone concentration over the concentration range of 10–200 nM with sensitivity of 0.016 μA/nM^?1 using differential pulse voltammetry. The detection limit was 6.54 nM (S/N = 3). The electrode also displayed good selectivity and repeatability. In the presence of clozapine (CLZ) the response of RIS kept almost unchanged. Thus this electrode could find application in the determination of RIS in some real samples. The analytical performance of the OPPF₆‐MWCNTs/GCE was demonstrated for the determination of RIS in human serum and pharmaceutical samples.     

Nuclear magnetic resonance-compatible furnace for high temperature MR imaging and spectroscopy in situ

A high temperature magnetic resonance compatible furnace for real time in situ monitoring of materials, processes, and chemical reactions with magnetic resonance imaging and spectroscopy is described. Design issues are analyzed. Example applications are demonstrated with a time sequence of proton images of the binder burnout in a porous green ceramic cylinder containing polyethylene glycol binder at 200 degrees C, and 7Li images of the molten salt LiCl at 700 degrees C.     

The influence of polytetrafluorethylene reduction on the capacity loss of the carbon anode for lithium ion batteries

To date, the lithium ion battery has become the focus of secondary battery studies. A considerable capacity loss during the first lithiation of its carbon electrode is a severe drawback of this kind of battery. It has been suggested frequently that the capacity loss was caused by the decomposition of the electrolyte on the surface of the carbon electrode. However, the contribution of binder reduction to this capacity loss has never been considered until now. This paper deals with the binder polytetrafluorethylene (PTFE) reduction and finds that it plays an important part in the capacity loss. It is found that (1) the capacity loss increased with increasing PTFE binder content, (2) the X-ray diffraction peaks corresponding to the PTFE, binder became weaker, while more of the lithium was consumed by the carbon electrode, and disappeared when the consumed amount of lithium exceeded the theoretical value of 1070 mAh per gram of PTFE and (3) the height of the high voltage plateau of the electrochemical titration curves was just a function of storage time, and the length of the plateau was a function of the PTFE content.     

凹凸棒土粘结剂对13X分子筛吸附性能的促进作用

以凹凸棒土为粘结剂制备了13X分子筛吸附剂.研究了其孔结构、表面电性和对水、CO2和N2分子的吸附性能,并与高岭土为粘结剂的同类吸附剂进行了比较.结果表明,凹凸棒土发达的孔隙结构、大的比表面和表面负电性质有利于其吸附容量的改善,而13X/凹凸棒土中丰富的中孔促进了其对CO2的吸附速率.另外由CO2吸附热力学分析可知,CO2在13X/凹凸棒土上具有较低的吸附热,结果将有利于其在吸附剂上的脱附.     

基于Android网络恶意行为检测系统的应用研究

目前Android系统是当今网络用户最对的应用系统之一,而随着科学技术的发展,对于Android系统的恶意行为软件也逐渐增多,给当前的应用用户的财产以及私人信息安全带来了很大的威胁,严重的迟缓了当前移动通信网络技术以及相关于应用客户端的推广。为此本文根据Android系统的特有机构设计出一种基于Binder信息流的自动检测恶意行为系统,以此来解决对于当前网络安全对于Android系统用户带来的负面影响。根据目前网络中的应用通信信息,检测可能存在的泄露用户信息的应用软件为目标,建立信息矢量图以此来分析当前网络中的恶意行为。通过对软件进行检测,研究可实用性和检测效果,结果显示其识别率可以达到100%,并且软件运行只占有内存的7%,结果可以达到当前的Android用户的使用范围。     

Crosslinked carboxymethyl cellulose-sodium borate hybrid binder for advanced silicon anodes in lithium-ion batteries

Hybrid gel binder with deformable network and strong adhesive capability on silicon particles can effectively accommodate the large volume change of silicon anodes upon cycling, leading to an excellent cycling stability and high Coulombic efficiency.     

Characterisation of proteinaceous binders in artistic paintings by chromatographic techniques

This review discusses the application of chromatographic techniques (GC, HPLC and Py-GC) for the characterisation of proteinaceous materials in artistic paintings. The focus is on the various analytical steps that are needed to determine these natural materials in paint samples, from sampling and sample pre-treatment, including various methods of hydrolysis and derivatisation for GC and HPLC, to approaches for data evaluation.     

Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials

A study of LA-ICP-MS analysis of pressed powdered tungsten carbide precursors was performed to show the advantages and problems of nanosecond laser ablation of matrix-unified samples. Five samples with different compositions were pressed into pellets both with silver powder as a binder serving to keep the matrix unified, and without any binder. The laser ablation was performed by nanosecond Nd:YAG laser working at 213 nm.The particle formation during ablation of both sets of pellets was studied using an optical aerosol spectrometer allowing the measurement of particle concentration in two size ranges (10-250 nm and 0.25-17 μm) and particle size distribution in the range of 0.25-17 μm. Additionally, the structure of the laser-generated particles was studied after their collection on a filter using a scanning electron microscope (SEM) and the particle chemical composition was determined by an energy dispersive X-ray spectroscope (EDS).The matrix effect was proved to be reduced using the same silver powdered binder for pellet preparation in the case of the laser ablation of powdered materials.The LA-ICP-MS signal dependence on the element content present in the material showed an improved correlation for Co, Ti, Ta and Nb of the matrix-unified samples compared to the non-matrix-unified pellets. In the case of W, the ICP-MS signal of matrix-unified pellets was influenced by the changes in the particle formation.     

Animal glues in mixtures of natural binding media used in artistic and historic objects: identification by capillary zone electrophoresis

Animal glues were often used in historic and artistic objects, e.g. as paint ground, as binders for pigments, or as adhesives. The sources were egg, casein, or different collagens. For restoration and conservation purposes it is important to know which kind of animal glue a museum object contains. Capillary electrophoresis can deliver such information, because it enables differentiation among the three proteinaceous glue classes according to their different amino acid patterns after hydrolysis. This work deals with the most relevant problem in practice, whether this identification is obstructed by the presence of other binders, with which they are mixed in many real samples; in particular, interference from plant gums and drying oils was investigated. Capillary electrophoresis of the hydrolysates (after reaction with 6 mol L^–1 HCl) was performed with an acidic background electrolyte consisting of chloroacetic acid (51.9 mmol L^–1) adjusted with LiOH to pH 2.26. The underivatised analytes were detected with a contactless conductivity detector. It was found that the constituents of the plant gums (monosaccharides) or drying oils (long-chain fatty acids and short-chain dicarboxylic acids) never interfered with identification of the animal glues, as shown for artificial mixtures of the different binders even at tenfold excess over the animal glue, and for egg tempera samples. The method was used to identify the filling material from a statue from the eighteenth century.