Effects of in situ thermal annealing on the structural, optical, and electrical properties in Hg0.7Cd0.3Te epilayers grown on CdTe buffer layers

Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) transmission, and Hall effect measurements were performed to investigate the structural, optical, and electrical properties of as-grown and in situ-annealed Hg_0.7Cd_0.3Te epilayers grown on CdTe buffer layers by using molecular beam epitaxy. After the Hg_0.7Cd_0.3Te epilayers had been annealed in a Hg-cell flux atmosphere, the SEM images showed that the surface morphologies of the Hg_0.7Cd_0.3Te thin films were mirror-like with no indication of pinholes or defects, and the FTIR spectra showed that the transmission intensities had increased in comparison to that of the as-grown Hg_0.7Cd_0.3Te epilayer. Hall-effect measurements showed that n-Hg_0.7Cd_0.3Te epilayers were converted to p-Hg_0.7Cd_0.3Te epilayers. These results indicate that the surface, optical, and electrical properties of the Hg_1 − xCd_xTe epilayers are improved by annealing and that as-grown n-Hg_1 − xCd_xTe epilayers can be converted to p-Hg_1 − xCd_xTe epilayers by in situ annealing.     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Observation of sharp resistance anomalies near Tc in granular superconductors

Granular films prepared from well-defined In clusters embedded in Kr (? 10-40 at % Kr) show sharp resistance anomalies very close to the superconducting transition temperature. The observed resistance peak(s), which go(es) above the normal state resistance R_N and which can be as high as ? 1.5 R_N, can be explained by a “mesoscopic” effect: Superconducting percolation aggregates of size ξ_ρ, larger than the superconducting coherence length ξ_S, but smaller than the quasiparticle relaxation length λ_Q*, have a superconducting gap, but are not yet able to carry a supercurrent.     

Improved dust capture methods for crushing plant

The use of compressive crushing equipment such as gyratory crushers within minerals processing plants can potentially generate large quantities of dust. Remedies to this problem include the retrofitting of shrouds, enclosures, local exhaust ventilation (LEV) systems and water suppression systems. The single or combined application of these systems must be optimised to ensure they operate efficiently. It is desirable that the future design planning of such facilities include integrated dust suppression and/or removal systems to ensure material delivery rates are maintained and the welfare of the workforce is protected.     

The nanogranular nature of C-S-H

Despite its ubiquitous presence as binding phase in all cementitious materials, the mechanical behavior of calcium-silicate-hydrates (C-S-H) is still an enigma that has deceived many decoding attempts from experimental and theoretical sides. In this paper, we propose and validate a new technique and experimental protocol to rationally assess the nanomechanical behavior of C-S-H based on a statistical analysis of hundreds of nanoindentation tests. By means of this grid indentation technique we identify in situ two structurally distinct but compositionally similar C-S-H phases heretofore hypothesized to exist as low density (LD) C-S-H and high density (HD) C-S-H, or outer and inner products. The main finding of this paper is that both phases exhibit a unique nanogranular behavior which is driven by particle-to-particle contact forces rather than by mineral properties. We argue that this nanomechanical blueprint of material invariant behavior of C-S-H is a consequence of the hydration reactions during which precipitating C-S-H nanoparticles percolate generating contact surfaces. As hydration proceeds, these nanoparticles pack closer to center on-average around two characteristic limit packing densities, the random packing limit (η=64%) and the ordered face-centered cubic (fcc) or hexagonal close-packed (hcp) packing limit (η=74%), forming a characteristic LD C-S-H and HD C-S-H phase.     

粒度空间约简及其粗糙集模型研究

针对交可约粒度空间中覆盖、基和粒结构的关系,结合偏序关系的哈斯图,给出一种约简粒度空间的方法.另外,通过限定上、下近似算子的取值范围,重新定义了交可约粒度空间上的粗糙集模型,并讨论了其相关性质.     

Numerical analysis of enhanced mixing in a Gallay tote blender

The mixing performance of a multi-bladed baffle inserted into a traditional Gallay tote blender is explored by graphic processing unit-based discrete element method software. The mixing patterns and rates are investigated for a binary mixture, represented by two different colors, under several loading profiles. The baffle effectively enhances the convective mixing both in the axial and radial directions, because of the disturbance it causes to the initial flowing layer and solid-body zone, compared with a blender without a baffle. The axial mixing rate is affected by the gap between the baffle and the wall on the left and right sides, and an optimal blade length corresponds to the maximum mixing rate. However, the radial mixing rate increases with the blade length almost monotonically.     

Comparative in vivo constituents and pharmacokinetic study in rats after oral administration of ultrafine granular powder and traditional decoction slices of Chinese Salvia

Salvia miltiorrhiza, one of the most well‐known herbal medicines, is commonly used for the treatment of coronary heart diseases in China. Besides traditional decoction slices (TDS), another relatively new product of S. miltiorrhiza, ultrafine granular powder (UGP; D90 < 45 μm), is also increasingly being used. In this paper, a UHPLC‐LTQ‐Orbitrap MS technique was developed for a metabolite profile study after oral administration of UGP and TDS of S. miltiorrhiza. The results showed that the number of in vivo absorbed compounds from UGP was much greater than that from TDS, and different types of products from S. miltiorrhiza will have different metabolic processes in vivo. Furthermore, a UHPLC‐Q‐Trap MS/MS method for simultaneously determining four tanshinones (tanshinone IIA, dihydrotanshinone I, tanshinone I and cryptotanshinone) was established and applied to assess the pharmacokinetics of the two types of products. All of the analytes displayed significant higher area under the concentration–time curve and peak concentration after oral administration of UGP than after TDS, indicating that ultrafine powder product could improve the bioavailability and absorption of cryptotanshinon,tanshinone II A,dihydrotanshinonE I and tanshinone I in vivo. The present study provides scientific information for further exploration of the pharmacology of these two types of S. miltiorrhiza and offers a reference for clinical administration of S. miltiorrhiza.     

MRI investigation of granular interface rheology using a new cylinder shear apparatus

The rheology of granular materials near an interface is investigated through proton magnetic resonance imaging. A new cylinder shear apparatus has been inserted in the magnetic resonance imaging device, which allows the control of the radial confining pressure exerted by the outer wall on the grains and the measurement of the torque on the inner shearing cylinder. A multi-layer velocimetry sequence has been developed for the simultaneous measurement of velocity profiles in different sample zones, while the measurement of the solid fraction profile is based on static imaging of the sample. This study describes the influence of the roughness of the shearing interface and of the transverse confining walls on the granular interface rheology.     

Aeolian transport of sand

The airborne transport of particles on a granular surface by the saltation mechanism is studied through numerical simulation of particles dragged by turbulent air flow. We calculate the saturated flux q_s and show that its dependence on the wind strength u_* is consistent with several empirical relations obtained from experimental measurements. We propose and explain a new relation for fluxes close to the threshold velocity u_t, namely, q_s=a(u_*-u_t)^α with α≈2. We also obtain the distortion of the velocity profile of the wind due to the drag of the particles and find a novel dynamical scaling relation. We also obtain a new expression for the dependence of the height of the saltation layer as function of the strength of the wind.