Human-to-metal electrostatic discharge current measurements – Notes on the ESD current waveform

The Electrostatic Discharge (ESD) phenomenon has been described through the IEC 61000-4-2. ESD current parameters' values, have been set in this Standard. The theoretical ESD current waveform defined in this standard, describing the conventional Contact discharge mode, needs to be re-evaluated on the basis of accurate experimental data. Even though the standard deals with commercial ESD generators, its goal is to simulate the natural phenomenon as good as possible. More and accurate data may contribute to the better simulation of the natural phenomenon. New values and better comprehension of the phenomenon demand new measurements based on high end measuring equipment. Such works and publications have been carried out the past years. Yet, the need to systematize and integrate this work remains. Larger and trust-worthy series of measurements need to be carried out and presented clearly.This paper deals with new ESD-current data, taken with broadband equipment. New and more detailed measurements like these, were never before taken at such a large number of individuals. The goal of this work is that the data acquired can serve as a basis for re-evaluating the conventional approach of the scientific community to the ESD event.In this paper, using a broadband measuring system, new parameters' values are measured and relations are presented, following standard statistical procedures. The results, which occur from measurements carried out on tenths of human individuals, are questioning the Standard in many points. A new way of approaching the standardization of the ESD current is proposed, as the excuse of the poor measuring equipment that sets barriers on the measuring accuracy, does not apply any more. The charging voltages of 500 V and 1000 V were also examined since such range of voltages are often met at ESD events and they are considered very harmful.     

HL-1M边缘等离子体静电湍流扰动

对HL－1M边缘等离子体静电湍流扰动进行了初步的实验研究。获得了扰动的基本特征量，估计了低杂波引起的径向粒子流的变化。在加低杂波（2．45GHz)前、后，电子密度扰动和极向电场扰动的幅度及其关联性变化不大。虽然低杂波部分抑制了静电湍流，但在数量上不能解释粒子约束改善的实验结果。     

推广的Kantorovich算子在Ba空间中的逼近

利用Ditzian-Totik光滑模,研究了推广的Kantorovich算子在Ba空间中的逼近,得到逼近的正定理与等价定理.所得结果改进、推广和统一了一些作者的结果.     

Superconducting magnetis in spectrometers of high-energy particles

This is a retrospective review of superconducting magnets for spectrometers of high-energy particles. The magnets are grouped according to the purpose of the spectrometers and the shape of coils. Data on the thermostatting and electrical protection of the coils are presented. Design features of various-type magnets are described. The first large superconducting solenoids were constructed for hydrogen bubble chambers. Further progress was related to the construction of spectrometers that were designed for experiments at colliders and included solenoids with radiation-transparent walls. Along with solenoids, dipole and toroidal magnets were used in spectrometers; some designs of such magnets are also discussed in the review. A special type of polarizing solenoid is used in polarized targets. Spectrometers with magnets of various coil shapes were created for astrophysical research. As an instance, the original radiation-transparent solenoid and the dipole magnet with a cryocooler are represented. Prospects for the future development of magnets are connected with the use of high-temperature superconductors (HTS). Information on the present situation in engineering the HTS ribbon and solenoids is given.     

Ablation of an optically homogeneous absorbing medium by scattered pulsed laser radiation

We have studied the ablation of an aqueous CuCl₂ solution in a pulsed Nd:YAG laser field featuring a speckle-patterned structure characterized by spatial radiation energy fluence fluctuations. This leads to a nonuniform distribution of the energy absorbed in the bulk of the sample being irradiated and causes local overheating centers to form, wherein ablation is observed to take place at laser energy fluences below the threshold value found in experiments with a homogeneous laser beam. This effect should be manifest in the laser irradiation of biotissues which, as a rule, scatter light strongly.     

Femtosecond laser structuring of titanium implants

In this study we perform the first femtosecond laser surface treatment of titanium in order to determine the potential of this technology for surface structuring of titanium implants. We find that the femtosecond laser produces a large variety of nanostructures (nanopores, nanoprotrusions) with a size down to 20 nm, multiple parallel grooved surface patterns with a period on the sub-micron level, microroughness in the range of 1-15 μm with various configurations, smooth surface with smooth micro-inhomogeneities, and smooth surface with sphere-like nanostructures down to 10 nm. Also, we have determined the optimal conditions for producing these surface structural modifications. Femtosecond laser treatment can produce a richer variety of surface structures on titanium for implants and other biomedical applications than long-pulse laser treatments.     

Ba(Zr0.3Ti0.7)O3 铁电薄膜的制备

介绍了用溶胶-凝胶法(sol-gel)在Pt/Ti/SiO2/Si衬底和石英衬底上制备Ba(Zr0.3Ti0.7)O3铁电薄膜的基本原理、工艺过程及工艺特点;Sol-gel制备的Ba(Zr0.3Ti0.7)O3铁电薄膜表面平整、厚度均匀.     

Deposition conditions in tailoring the morphology of highly porous reticular films prepared by electrostatic spray deposition (ESD) technique

Spongy-like reticular structure is a unique morphology fabricated by electrostatic spray deposition (ESD) technique. The effects of solvent, substrate temperature, precursor feeding rate, static electric field strength, and deposition time on tailoring the reticular structure were investigated. Scanning electron microscopy was used to observe the film morphology. MnO_x or LiMn₂O₄ were selected as the model materials. It is found that in addition to the conventional solvent butyl carbitol, other kinds of solvents such as ethylene glycol and propylene glycol can also be used to obtain reticular films at a suitable substrate temperature. Porous films with a low cross-linking degree pore structure can be prepared by increasing precursor feeding rate or decreasing substrate temperature. Increasing the deposition time or the electric field strength helps to obtain reticular films with more homogeneous pore size distribution. In addition, the addition of a high boiling-point solvent in mixed alcohol solvent results in the increase of proper substrate temperature. It is concluded that the fluidity of the spray droplets on the surface of a hot substrate is an important factor to form a reticular film.     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

Electrostatic potentials of molecules and prediction of the lewis acid-base properties of solvents,part I. General considerations

Summary Electrostatic potentials in the vicinity of isolated molecules of typical nonaqueous solvents were computed in the MNDO approximation. It was found that the calculated dipole moments are in good agreement with experimental values. However, it turned out that in many cases electrostatic interactions of ions with solvent molecules cannot be described in the frame of ion-dipole interactions. Thus, two computable parameters,UN andUP describing short-range electrostatic interactions of a solvent molecule with a cation or an anion of radiusR were proposed. The dependence ofUN andUP uponR is analyzed in the context of ion-solvent interactions.

---

Elektrostatische Potentiale von Molekülen und Voraussage von Lewis-Säure-Base-Eigenschaften von Lösungsmitteln, 1. Mitt.: Allgemeine Grundlagen

Zusammenfassung Es wurden die elektrostatischen Potentiale in der Umgebung von isolierten Molekülen typischer nichtwäßriger Lösungsmittel in der MNDO-Näherung berechnet. Die berechneten Dipolmomente waren in guter Übereinstimmung mit den experimentellen Werten. Es wurde jedoch beobachtet, daß in vielen Fällen die elektrostatischen Wechselwirkungen von Ionen mit Lösungsmittelmolekülen nicht im Rahmen von Ionen-Dipol-Wechselwirkungen beschrieben werden können. Dafür wurden zwei berechenbare ParameterUN undUP zur Beschreibung von elektrostatischen Wechselwirkungen im Nahbereich eines Lösungsmittelmoleküls mit einem Kationen- oder AnionenradiusR vorgeschlagen. Die Abhängigkeit vonUN undUP vonR wurde im Zusammenhang von Ionen-Solvens-Wechselwirkungen untersucht.