GC-MS Studies on Derivatization of Creatinine and Creatine by BSTFA and Their Measurement in Human Urine

In consideration of its relatively constant urinary excretion rate, creatinine (2-amino-1-methyl-5H-imidazol-4-one, MW 113.1) in urine is a useful endogenous biochemical parameter to correct the urinary excretion rate of numerous endogenous and exogenous substances. Reliable measurement of creatinine by gas chromatography (GC)-based methods requires derivatization of its amine and keto groups. Creatinine exists in equilibrium with its open form creatine (methylguanidoacetic acid, MW 131.1), which has a guanidine and a carboxylic group. Trimethylsilylation and trifluoroacetylation of creatinine and creatine are the oldest reported derivatization methods for their GC-mass spectrometry (MS) analysis in human serum using flame- or electron-ionization. We performed GC-MS studies on the derivatization of creatinine (d₀-creatinine), [methylo-²H₃]creatinine (d₃-creatinine, internal standard) and creatine (d₀-creatine) with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) using standard derivatization conditions (60 min, 60 °C), yet in the absence of any base. Reaction products were characterized both in the negative-ion chemical ionization (NICI) and in the positive-ion chemical ionization (PICI) mode. Creatinine and creatine reacted with BSTFA to form several derivatives. Their early eluting N,N,O-tris(trimethylsilyl) derivatives (8.9 min) were found to be useful for the precise and accurate measurement of the sum of creatinine and creatine in human urine (10 µL, up to 20 mM) by selected-ion monitoring (SIM) of m/z 271 (d₀-creatinine/d₀-creatine) and m/z 274 (d₃-creatinine) in the NICI mode. In the PICI mode, SIM of m/z 256, m/z 259, m/z 272 and m/z 275 was performed. BSTFA derivatization of d₀-creatine from a freshly prepared solution in distilled water resulted in formation of two lMate-eluting derivatives (14.08 min, 14.72 min), presumably creatinyl-creatinine, with the creatininyl residue existing in its enol form (14.08 min) and keto form (14.72 min). Our results suggest that BSTFA derivatization does not allow specific analysis of creatine and creatinine by GC-MS. Preliminary analyses suggest that pentafluoropropionic anhydride (PFPA) is also not useful for the measurement of creatinine in the presence of creatine. Both BSTFA and PFPA facilitate the conversion of creatine to creatinine. Specific measurement of creatinine in urine is possible by using pentafluorobenzyl bromide in aqueous acetone.     

Simultaneous determination of estrogenic and androgenic hormones in water by isotope dilution gas chromatography-tandem mass spectrometry

A rapid gas chromatography-tandem mass spectrometry (GC-MS/MS) analytical method was developed for the simultaneous analysis of 7 estrogenic hormones (17α-estradiol, 17β-estradiol, estrone, mestranol, 17α-ethynylestradiol, levonorgestrel, estriol) and 5 androgenic hormones (testosterone, androsterone, etiocholanolone, dihydrotestosterone, androstenedione) in aqueous matrices. This method is unique in its inclusion of all 12 of these estrogens and androgens and is of particular value due to its very short chromatographic run time of 15 min. The use of isotope dilution for all analytes ensures the accurate quantification, accounting for analytical variabilities that may be introduced during sample processing and instrumental analysis. Direct isotopically labelled analogues were used for 8 of the 12 hormones and satisfactory isotope standards were identified for the remaining 4 hormones. Method detection levels (MDLs) were determined to describe analyte concentrations sufficient to provide a signal with 99% certainty of detection. The established MDLs for most analytes were 1-5 ngL(-1) in a variety of aqueous matrices. However, slightly higher MDLs were observed for etiocholanolone, androstenedione, testosterone, levonorgestrel and dihydrotestosterone in some aqueous matrices. Sample matrices were observed to have only a minor impact on MDLs and the method validation confirmed satisfactory method stability over intra-day and inter-day analyses of surface water and tertiary treated effluent samples.     

Oxidative status of human low density lipoprotein isolated by anion-exchange high-performance liquid chromatography--assessment by total hydroxyoctadecadienoic acid, 7-hydroxycholesterol, and 8-iso-prostaglandin F(2alpha)

This study aims to measure the oxidative status of LDL from human plasma (n=26) as assessed by biomarkers for lipid peroxidation, total hydroxyoctadecadienoic acid (tHODE), 7alpha- and 7beta-hydroxycholesterol (t7-OHCh), and 8-iso-prostaglandin F(2alpha) (t8-iso-PGF(2alpha)) after subfractionation of LDL with an anion-exchange HPLC (AE-HPLC). LDL was separated and quantified by AE-HPLC as LDL-1, LDL-2, and LDL-3 in the order of the anionic charge of the LDL particles. The concentrations of tHODE, t7-OHCh, and t8-iso-PGF(2alpha) in both plasma and LDL subfractions were assessed after reduction and saponification. In this method, the free and ester forms of hydroperoxides, ketones, and hydroxides of linoleic acid and cholesterol are measured as tHODE and t7-OHCh, respectively. It was found that tHODE significantly correlated with the proportion of LDL-2 and LDL-3 as well as with the concentration of malondialdehyde-modified LDL in plasma. Further, by the analyses of LDL subfractions, the concentrations of tHODE, t8-iso-PGF(2alpha), and t7-OHCh in LDL-3 were found to be significantly higher than those in LDL-1 and LDL-2. These results clearly indicate that the extent of oxidation increases in the order of LDL-1相似文献   

Analysis of cocaine and benzoylecgonine in urine by using multisyringe flow injection analysis‐gas chromatography‐mass spectrometry system

In this paper, a method was described to determine cocaine (COC) and benzoylecgonine (BZE) in human urine samples by GC‐MS detection. The extraction of analytes from urine samples was achieved in an Oasis hydrophilic–lipophilic balance column (20 mm×3.9 mm id, dp=25 μm; Waters, USA), incorporated in a multisyringe flow injection system, used for the sample treatment. Finally, to improve the volatility of the BZE, an in‐line derivatization reaction with N,O‐bis (trimethylsilyl) trifluoroacetamide with 1% trimethylchlorosilane was made microwave‐assisted in order to reduce the reaction time. The results showed that the proposed method is a good alternative for the analysis of COC and BZE in urine samples because it offers advantages compared with those described in the literature, which include simplicity in the sample treatment, the sensitivity and selectivity necessary to determine the analytes of interest at low levels in the urine and high sample throughput.     

微波照射衍生化气相色谱法检测丁丙诺啡

报道了微波照射衍生化气相色谱法检测丁丙诺啡的最佳条件和方法.丁丙诺啡,加入N,O-双(三甲基硅烷基)三氟乙酰胺试剂,于微波炉560W衍生化3min,GC/NPD检测,线性范围为0.2-80 μg/mL,检出限10ng/mL.该方法灵敏度高,稳定性好,操作简单,可用于涉毒案件中丁丙诺啡的检验.     

In-tube silylation in combination with thermal desorption gas chromatography-mass spectrometry for the determination of hydroxy polycyclic aromatic hydrocarbons in water

For the determination of hydroxy polycyclic aromatic hydrocarbons (OH-PAHs), a simple and sensitive method based on the silylation of OH-PAHs using N,O-bis(trimethylsilyl)trifluoro acetamide (BSTFA) in combination with thermal desorption gas chromatography-mass spectrometry (TD-GC-MS) is described. This method was performed by way of direct silylation in a TD unit (in-tube silylation) coupled to a GC inlet. Both a good detection limit (4.1-1200 pg L⁻¹, S/N = 3) and higher precision (relative standard deviation < 4% on average) were achieved for 21 OH-PAHs studied using the full scan mode (m/z = 40-550). These good results were due to the highly efficient derivatization of the OH-PAHs, which was attributed to not only the moisture-free environment and programmable heating in the TD tube for the in-tube silylation, but also to the constant vapor generation of BSTFA using a capillary introduction method. Although recoveries of 21 OH-PAHs from the spiked 3% NaCl solution ranged between 9 and 304%, those of 11 OH-PAHs fell between 70 and 130% (R.S.D. < 11%). Thus, the present method was applied to a seawater sample collected from an industrial port, and nine OH-PAHs including 1- and 2-OH-fluorenone and 1,8- and 2,6-OH-anthraquinone were determined at concentrations of 0.49-5.8 ng L⁻¹. Along with these OH-PAHs, significant amounts of several long chain fatty acids (C₁₂, C₁₆, C₁₈, C₂₀ and C₂₂) and bisphenol A were also identified in the seawater sample using reference data in a library of mass spectra (match factor: >80%).     

Rapid Determination of Salicylic Acid in Plant Materials by Gas Chromatography–Mass Spectrometry

Summary Salicylic acid (SA) is a signaling compound in plants such as tobacco, cucumber, and tomato which can induce systemic acquired resistance. In the work discussed in this paper a simple, rapid, and sensitive method was developed for determination of salicylic acid in plant tissues by gas chromatography–mass spectrometry (GC–MS). SA from tomato leaves extracted with 9:1 (v/v) methanol–chloroform was derivatized by use of bis(trimethylsilyl)trifluoroacetamide (BSTFA) under the optimum reaction conditions (120 °C, 60 min). Quantitative analysis by GC–MS was performed in selected ion monitoring (SIM) mode using an internal standard. Procedures for sample preparation and reaction conditions were optimized. Analysis was completed within 2 h. A sensitivity of 10 ng g^–1 fresh weight and a relative standard deviation less than 5.0% for SA in tomato leaves were achieved. The method could be used for investigation of SA in plant tissues to monitor fast responses of plant defense.     

Synthesis of a liposome incorporated 1-carboxyalkylxanthine-phospholipid conjugate and its recognition by an RNA aptamer

RNA or DNA aptamers have received much attention in recent literature as therapeutic agents and chromatographic matrices, however, their use in analytical methodologies is relatively unexplored. We describe here investigations aiming to combine this promising technology with versatile liposomes in a competitive assay format. Thus, a phospholipid derivative of an unsymmetrical 1,3-disubstituted xanthine (1-carboxyethyl-3-methylxanthine-DPPE) was prepared for incorporation into the lipid bilayers of dye-encapsulating liposomes. Its synthesis and characterization using GC-MS, ¹H NMR, and HPLC are described. Equilibrium filtration experiments using enzyme linked immunosorbent assays (ELISAs) were completed to assess the affinity for theophylline of an unmodified RNA aptamer and one that had been modified on the 3′ end with biotin. A dissociation constant (K_d) for theophylline with the unmodified RNA aptamer of 0.9 μM and biotinylated aptamer of 1.0 μM was determined which showed that this modification did not affect the aptamer's affinity using this technique. The observed K_d values correlated well to the previously reported value of 0.6 μM. Experiments were also carried out in a competitive manner with the prepared 1-carboxypropyl-3-methylxanthine intermediate, and the final 1-carboxypropyl-3-methylxanthine-DPPE conjugate once it had been incorporated into the bilayers of liposomes. The K_d value for 1-carboxypropyl-3-methylxanthine was approximately 2.7 μM. Finally, successful binding to theophylline-analog-tagged liposomes in a competitive assay format was shown versus liposomes prepared without the tag.     

Sample stacking with in-column silylation for less volatile polar compounds using GC-MS

This paper presents sample stacking with in-column silylation (SIS) for quantitative analysis of less volatile polar compounds using gas chromatography-mass spectrometry (GC-MS). This was achieved by the combination of sandwiched in-column silylation and multiple injections (up to 100 times or 100 μL in total). N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) was used as a silylating reagent. For the SIS technique, samples were introduced multiple N times (N = 2~100) into a capillary column in between BSTFA injections. The quantitative characteristic of SIS technique was studied using bisphenol A (BPA) as a model compound. The sandwiched in-column silylation for the less volatile polar compounds effectively replaced polar hydrogen with trimethylsilyl group to reduce sample adsorption and band broadening. Meanwhile, multiple injections at the SIS technique contributed to increase the sensitivity quantitatively. The capability and limitation of this analytical approach were further investigated with various types of compounds such as hydroxyls, carboxylic acids, and amine.