An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

甲基红染料掺杂的聚乙烯醇薄膜光存储特性的实验研究

用2倍频小型YAG激光(532nm)作为写入光和擦除光,用He-Ne激光器623.8nm线作为读出光,用CCD作为探测器,研究了不同写入光功率下,甲基红/聚乙烯醇(MR/PVA)薄膜光栅生长的动力学过程和不同擦除光功率下,光栅擦除的动力学过程.结合光栅生长曲线的波动现象,对光存储机制进行了新的探讨.实验发现,两写入光和读出光的功率配比为1:1:1时,可获得最大衍射效率,提出读出光对写入过程具有双重作用的物理模型,对此实验结果给出了合理的解释.     

LC-MS/MS method for the confirmatory determination of aromatic amines and its application in textile analysis

A confirmation method for the determination of 18 aromatic amines originating from azo dyes after reductive cleavage was developed. The method is based on the use of high-performance liquid chromatography/tandem mass spectrometry with atmospheric-pressure chemical ionization. For the identification of the analytes one precursor ion and two daughter ions (multi-reaction monitoring, MRM) were selected and the LC-MS/MS parameters optimized to obtain high sensitivity and selectivity. The linear ranges varied from 0.1–1 to 30–50 g mL^–1 with correlation coefficients of 0.99 or better. The applicability of the method to determine o-tolidine (3,3-dimethylbenzidine) and 3,3-dimethoxybenzidine in textiles following reductive cleavage of acid red 114, trypan blue, and Chicago sky blue 6B was demonstrated.     

Some polyhydroxy azo–azomethine derivatives of salicylaldehyde: Synthesis, characterization, spectroscopic, molecular structure and antimicrobial activity studies

Some new substituted polyhydroxy azo–azomethine compounds were prepared by reaction of tris(hydroxymethyl)aminomethane with (E)-2-hydroxy-5-(phenyldiazenyl) benzaldehyde and its substituted derivatives. The structures of azo and azo–azomethine compounds were determined by IR, UV–vis, ¹H NMR and ¹³C NMR spectroscopic techniques, and/or X-ray diffraction studies. According to IR spectra, all azo–azomethine compounds adopt keto form in solid state. UV–vis analysis has shown the presence of keto–enol tautomerism in solution for all azo–azomethine compounds, except that for nitro substituted derivative, enol form is dominantly favored in solution. At the same time, above mentioned derivative compounds were studied in vitro for their antimicrobial properties. Among the phenylazosalicylaldehyde series compound tested, 4-phenylazosalicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde, 4-(2-chlorophenylazo)salicylaldehyde, 4-(4-fluorophenylazo)salicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde and 4-(4-ethylphenylazo)salicylaldehyde showed a weak antimicrobial activity only against gram positive bacteria. On the contrary, phenylazosalicylaldehyde series compounds were reacted tris(hydroxmethyl)aminomethane, that exhibited a strong antimicrobial activity against gram positive bacteria, yeast and mould. Moreover, while the 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol did not show an inhibition on tested microorganism, the addition of phenyldiazine groups to 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol resulted in a strong increases in antimicrobial activity.     

Toward the most versatile fluorophore: Direct functionalization of BODIPY dyes via regioselective C—H bond activation

BODIPY dyes are privileged fluorophores that are now widely used in highly diverse research fields. An overview of BODIPY dyes and a summarization of the different synthetic methodologies reported for direct C-H functionalization of the BODIPY framework have been provided.     

A facile synthesis of solid-emissive fluorescent dyes: dialkylbenzo[b]naphtho[2,1-d]furan-6-one-type fluorophores with strong blue and green fluorescence emission properties

A new type of organic fluorophores, dialkylbenzo[b]naphtho[2,1-d]furan-6-one-type fluorophores, exhibiting strong blue and green emission in the solid state has been easily synthesized by an one-step reaction. The X-ray crystal structure demonstrated that the structural form with a chair-shape with the sterical hindered dialkyl substituents and the 9-dibutylamino group prevents the fluorophores from forming short intermolecular contacts and produces intense solid-state fluorescence emission.     

油溶性偶氮染料的合成及其性能研究

随着染料在现代科技中的广泛应用,染料的油溶性也日益受到人们的重视.如:非线性光学材料、激光盘光学信息存贮材料中使用的染料、彩色成像中的油溶性影像染料等,对染料在有机溶剂中的溶解度都有很高的要求.偶氮染料是有机染料中的主要类型,但目前对其分子结构与油溶性关系的研究甚少.本文合成了一类黄色偶氮染料(见表1),并对其色光、油溶性等性能进行了测试,发现取代基相对于偶氮基的位置,是影响偶氮染料油溶性的主要因素.     

Enhanced visible-light-driven photodegradation of Acid Orange 7 azo dye in aqueous solution using Fe-N co-doped TiO2

FeN -co-doped TiO₂ photocatalysts are prepared by sol–gel method using titanium tetraisopropoxide, urea and iron(II) acetylacetonate as precursors of titania, nitrogen and iron, respectively. The prepared samples are analysed from chemical-physical point of view by X-ray diffraction (XRD), Raman spectroscopy, UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS), specific surface area measurements and scanning electron microscopy (FESEM). UV–Vis DRS spectra evidence that the co-doping of TiO₂ with N and Fe leads to the narrowing of the band gap value (2.7 eV) with respect to Fe-doped TiO₂ (2.8 eV) and N-doped TiO₂ (2.9–3 eV). XRD patterns show that photocatalysts are mainly in anatase phase and Fe and N ions are successfully incorporated into the TiO₂ lattice. The average crystallite size of Fe-N co-doped TiO₂ is slightly lower than the other samples and equal to about 7 nm and the specific surface area of the co-doped sample results to be 117 m² g⁻¹. Photocatalytic performances of all prepared samples are evaluated by analysing the degradation of Acid Orange 7 azo dye under visible light irradiation. Photocatalytic efficiency obtained using FeN co-doped TiO₂ strongly increases compared to undoped TiO₂, N-doped TiO₂ and Fe-doped TiO₂ photocatalysts. In detail, using the co-doped photocatalyst, dye discoloration and mineralization result equal to about 90 and 83% after 60 min of LEDs visible light irradiation, underlining the best performances of the FeN co-doped TiO₂ photocatalyst both in terms of treatment time and electric energy consumption.     

Synthesis and Characterization of Novel Monoazo N‐Ester‐1,8‐Naphthalimide Disperse Dyestuffs

Five novel monoazo disperse dyestuffs based on N‐ester‐1,8‐naphthalimide were synthesized. Acenaphthene was nitrated, then oxidized to 4‐nitro‐1,8‐naphthalic anhydride. 4‐Nitro‐1,8‐naphthalic anhydride was reacted with methyl and ethyl glycinate in alcoholic media, followed with reduction. 4‐Amino‐N‐methyl and ethyl glycinate‐1,8‐naphthalimide were obtained. These products were diazotized and coupled with appropriate aromatic amines to give bluish‐red or violet dyestuffs. All intermediates and dyestuffs were purified and characterized by ¹H‐NMR, FTIR, DSC, UV‐VIS and Elemental Analysis. Dispersion of dyestuffs was prepared in water and applied to polyester fabrics. The dyed fabrics showed that four of the synthesized dyestuffs were suitable for coloring polyester fibers, producing deep bluish red with very good build up properties.     

Flexibility and Rigidity of Proteins and Protein–Pigment Complexes

Proteins may be rigid or flexible to various degrees as required for optimal function. Flexibility of large parts of a protein, which rearrange or move, is particularly interesting and will be discussed in this article. We differentiate between several categories, although the boundaries between them are diffuse: flexibility of peptide segments, order–disorder transitions of spatially contiguous regions, and domain motions. The domains may be flexibly linked to allow rather unrestricted motions or the motions may be constrained to certain modes. The various categories of large-scale flexibility will be illustrated with the following examples: (1) Small protein proteinase inhibitors are rather rigid molecules which provide binding surfaces complementary to their cognate proteases but show also limited segmental flexibility and adaptation. (2) Large plasma proteinase inhibitors exhibit large conformational changes after interaction with proteases probably for regulatory purposes. (3) Pancreatic serine proteases employ a disorder–order transition of their activation domain as a means to regulate enzymic activity. (4) Immunoglobulins show rather unrestricted and also hinged domain motions in different parts of the molecule probably to allow binding to antigens in different arrangements. (5) Citrate synthase adopts open and closed forms by a hinged domain motion to bind substrates and release products and to perform the catalytic condensation reaction, respectively. (6) Riboflavin synthase, a bifunctional multienzyme complex, catalyzes two consecutive reactions by means of two subunits, α and β. The β-subunits form a shell, in which the α-subunits are enclosed. Diffusional motion of the catalytic intermediates is therefore restricted. In addition, rearrangement of the N-terminal segment occurs during the assembly of the β-subunit. In contrast, rigidity is dominant in the structures of the light-harvesting complexes and the photosynthetic reaction centers involved in photosynthetic light reactions. These are large protein–pigment complexes in which the proteins serve as matrices to hold the pigments in the appropriate conformation and relative arrangement. Since motion would contribute to deactivation of the photoexcited states of the pigments and diminish the efficiency of light-energy and electron transfer, the functional role of rigidity is easy to rationalize for these proteins.