Beiträge zur Chemie der Pyrrolpigmente, 26. Mitt.: Zur anaeroben Photochemie von Gallenpigmenten: Die Lumineszenz von Gallenpigment-Partialstruktursystemen und integralen Farbstoffen

The luminescence properties of about twentyfive model compounds representing the three main partial structures of bile pigments (namely pyrromethenes, pyrromethenones and methylenepyrrolylmethylenepyrrolinones) as well as tripyrrines and the geometrical isomers of aetiobiliverdin-IV- are reported. In these compounds there is usually only a very faint or even no fluorescence and phosphorescene as the pathway of deexcitation. Vibrational internal conversion and photoisomerizations at the exocyclic double bonds are the main anaerobic paths of radiationless decay of the excited states.

H. Falk, K. Grubmayr, E. Haslinger, T. Schlederer undK. Thirring, Mh. Chem.109, 1451 (1978).     

Parameter identification of thermophilic anaerobic degradation of valerate

The considered mathematical model of the decomposition of valerate presents three unknown kinetic parameters, two unknown stoichiometric coefficients, and three unknown initial concentrations for biomass. Applying a structural identifiability study, we concluded that it is necessary to perform simultaneous batch experiments with differenitial conditions for estimating these parameters. Four simultaneous batch experiments were conducted at 55°C, characterized by four different initial acetate concentrations. Product inhibition of valerate degradation by acetate was considered. Practical identification was done optimizing the sum of the multiple determination coefficients for all measured state viariables and for all experiments simultaneously. The estimated values of kinetic parameters and stoichiometric coefficients were characterized by the parameter correlation matrix, the confidence interval, and the student's t-test at 9% significance level with positive results except for the saturation constant, for which more eperiments for improving its identifiability should be conducted. In this article, we discussekinetic parameter estimation methods.     

Optimization of inoculum to substrate ratio for enhanced methane yield from leather fleshings in a batch study

One of the most significant issues of the last few decades has been tracing for renewable energy sources. Animal fleshing (ANFL) is the most common proteinaceous solid waste accured during the production of leather and it must be disposed of in an environmentally responsible manner. This paper is attempts to assess the biogas production from solid waste originating from the chrome based tannery. Anaerobic digestion of these wastes will be a viable option for waste stabilization and energy production in the form of biogas to be utilized in the industry. The bio-methane potential of the wastes were examined by mixing these wastes with various sources of inoculum and different inoculum to substrate (I/S) ratio considered. The batch experiments were carried out in 2.5 l glass reactors with a various source of inoculumviz., Cow Dung (CD), Elephant Dung (ED) and Bio-Digested Slurry (BDS) with varied inoculum to substrate (LFs) ratios for a retention time of 50 days with replications. The results obtained from the experiments showed that BDS:LF (25:75) had the highest gas production of 14505 ml (651.85 ml CH₄g^?1 VS) followed by CD:LF (50:50) produced 12072.5 ml (789.36 ml CH₄g^?1 VS) and ED:LF (75:25) produced 11252.5 ml (1492.08 ml CH₄g^?1 VS)with a methane content of 63.77, 61.92 and 62.72%, respectively.     

Laboratory investigation of biodegradability of a polyurethane foam under anaerobic conditions

Polyurethane (PU) foams can be used in many remediation applications as an isolation material to prevent the release of hazardous materials into the environment. The integrity of a PU foam was investigated in this study using short-term accelerated laboratory experiments including bioavailability assays, soil burial experiments, and accelerated bioreactors to determine the fate of PU foam in the soil where anaerobic processes are dominant. The experimental results have shown that the studied PU foam is likely not biodegradable under anaerobic conditions. Neither weight loss nor a change in the tensile strength of the PU material after biological exposure was observed. The FT-IR chemical signature of the PU foams was also nearly identical before and after biological exposure. The composition of the PU material (aromatic polyester and polyether PU) used in this study could have played a significant role in its resistance to microbial attack during the short-term accelerated experiments.     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.     

Monitoring of di-(2-ethylhexyl)phthalate,nonylphenol, nonylphenol ethoxylates,and polychlorinated biphenyls in anaerobic and aerobic sewage sludge by gas chromatography–mass spectrometry

The occurrence of di-(2-ethyhexyl)phthalate (DEHP), nonylphenol and nonyphenol mono- and diethoxylates (NPEs) and seven polychlorinated biphenyl (PCB) congeners in different types of sludge samples is reported. The analysis of these compounds was carried out by sonication-assisted extraction and analytical determination by gas chromatography coupled with a mass spectrometry detector, following a previously described method. The applicability of the method was tested by monitoring the organic pollutants in primary, secondary, mixed, and digested-dehydrated sludge samples from two wastewater treatment plants (WWTPs) based on aerobic and on anaerobic biological stabilization. The occurrence of these compounds in sewage sludge and the influence of sludge stabilization process on the further farmland application of the sludge were evaluated. DEHP and NPEs were detected in all analysed sludge samples from both WWTPs at concentration levels in the range of 22.3–601?mg?kg^?1 and 136–2357?mg?kg^?1 dm (dry matter), respectively. PCBs were detected in all types of sludge analysed from the anaerobic WWTP but was not detected in any sludge sample from the aerobic WWTP. Concentration levels of the sum of the seven PCBs congeners were up to 1.5?mg?kg^?1 dm. The concentration of DEHP, sum of NPEs, and sum of the seven PCB congeners were higher than the limits fixed in the third draft of the future Sludge Directive for land application of sludge in the 67%, 100%, and 11% of samples from the anaerobic WWTP and in the 83%, 92%, and 0% of samples from the aerobic WWTP, respectively.     

光催化甲烷转化研究进展

甲烷催化转化为高附加值产物、实现甲烷高效利用,具有重要的研究意义及工业应用价值。长期以来,如何在较温和的条件下将甲烷转化为其它更有价值的有机衍生物,如醇、芳烃、长链烷烃和烯烃等,是催化、化学及化工领域的热点和难点课题之一。光催化反应由光能激发产生光生电子和空穴,参与到甲烷C―H键活化和自由基形成,这为低温甲烷转化提供新的途径,本文主要围绕甲烷氧化和偶联反应,总结了近年来光催化研究进展,并对如何进一步提高光催化性能提出展望。     

Amelioration of methane yield in cheese whey fermentation by controlling the pH of the methanogenic stage

A two-stage, no-mix anaerobic digester of 145 L capacity was used to investigate the effect of controlling the pH of the methanogenic stage on the biogas production and the pollution potential reduction of acid cheese whey. The digester was operated at a 15-d hydraulic retention time, and a temperature of 35°C. Controlling the pH of the methanogenic stage increased the biogas production rate and methane yield by 77.77 and 289.00%, respectively. Reductions of up to 32.19, 44.44, and 35.86% in the COD, solids and nitrogen were achieved.     

Na-promoted aerobic oxidation of alcohols to ketones

Aerobic oxidation of a number of diaryl and arylalkyl carbinols to ketones was promoted by Na in THF at room temperature with up to 99% yield. This new oxidation method is also selective with good efficiency for the oxidation of benzylic secondary alcohols but not for a primary alcohol or nonbenzylic secondary alcohols. Under nitrogen, a catalytic amount of Ni or transition metal halides such as CoCl₃, FeCl₃, and NiCl₃ in combination with Na was also found to conduct a dehydrogenation of a secondary alcohol to the corresponding ketone in high yield at room temperature.     

Facile analysis of short-chain fatty acids as 4-nitrophenyl esters in complex anaerobic fermentation samples by high performance liquid chromatography

Short-chain fatty acids are crucial intermediates in the conversion of biomass to methane. Due to the complexity of raw biomass, volatile fatty acids (including n- and branched-chain compounds) as well as arylacetic and arylpropionic acids arise from digestion of carbohydrates, proteins and lipids. The development of a simple extraction procedure in combination with internal standardization and facile 4-nitrophenyl-labelling via oxalylchloride-generated acylchlorides enabled robust separation and quantification of the target compounds in crude biological samples like raw cattle manure and biogas fermenter contents. Detection limits of <100 μM and error rates of less than 4% for the quantification of individual compounds in a concentration range up to 50 mM for non-diluted samples suggest that the novel method might be of general advantage for the routine quantification of short-chain fatty acids in complex biological samples including complex fermentation media.