Experimental investigation and theoretical modeling of liquid entrainment in a horizontal tee with a vertical-up branch

This article describes a comprehensive literature review of liquid entrainment in horizontal pipes with vertical-up branches. Deficiencies in the available data and correlations were identified. The Air–water Test Loop for Advanced Thermal–hydraulic Studies (ATLATS) was constructed and entrainment onset and steady-state data were collected for a wide range of flow conditions. Using new insights gained from experimental testing, the authors developed a model for predicting the onset of entrainment and steady-state entrainment rate. Previously published correlations, along with the new model, are compared against all available data. The new model shows very good agreement with the onset data, but is not very good at predicting branch quality at high liquid flow rates.     

高等代数与解析几何一体化教学思考

本探讨了高等代数与解析几何进行一体化教学的必要性，研究了高等代数与解析几何进行一体化教学以后教学内容的协调性与教学手段的合理性，强调了数学实验在高等代数与解析几何一体化教学中的重要性。     

UV/TiO2 photodegradation of metronidazole,ciprofloxacin and sulfamethoxazole in aqueous solution: An optimization and kinetic study

Emerging pharmaceutical ingredients (APIs) like sulfamethoxazole (SMX), metronidazole (MNZ) and ciprofloxacin (CIP) are biopersistent and toxic to the environment and public health. In this study, UV/TiO₂ photodegradation was applied in the degradation of SMX, MNZ and CIP individually and in a mixture. For a 5 mg/L SMX solution, about 97% of SMX was degraded within 360 min, which was reduced to 80% for 80 mg/L of SMX solution at the same TiO₂ dosage and photodegradation time. The maximum removals of MNZ and CIP as individual components were 100% and 89%, respectively at 600 min of photodegradation reaction time. For binary mixtures, the highest removal (100%) was achieved for MNZ and CIP ([MNZ] = [CIP] = 40 mg/L) mixture at 120 min whereas the degradations were 97% and 96% for SMX and MNZ, and SMX and CIP binary mixtures, respectively, even after 600 min of experimental time at the same concentrations. For tertiary mixture, the maximum degradation 99% was observed for (SMX = CIP] = 20 mg/L and [MNZ] = [40 mg/L) at 600 min. The observed reaction rate was 0.01085 min^?1 when SMX concentration was 5 mg/L, which decreased to 0.00501 min^?1 for SMX concentration of 80 mg/L, indicating decreasing of reaction rate at higher concentration. The results indicate that the UV/TiO₂ process is promising to apply for the treatment of pharmaceutical wastewaters.     

Surface properties of ω-perfluorooctyl-alkyl polyacrylates: odd–even effect

A series of ω-perfluorooctyl-alkyl polyacrylates has been prepared and analysed. The odd–even effect, already observed in the case of liquid crystalline polymers has been exhibited for perfluorinated ones. Values of the contact angles to advanced (θ_a), with withdrawal (θ_r), as well as the contact angle hysteresis (Δθ) of various ω-perfluorooctyl-alkyl polyacrylates in water at 20 °C are described. Contrary to the advancing contact angle which is almost independent of spacer length, the receding one varies strongly with it.     

Rapid and simple method for determination of Nepsilon-(carboxymethyl)lysine and Nepsilon-(carboxyethyl)lysine in urine using gas chromatography/mass spectrometry

A new procedure was developed to determine in urine the concentrations of N(epsilon)-(carboxymethyl)lysine (CML) and N(epsilon)-(carboxyethyl)lysine (CEL), the major products of oxidative modification of glycated proteins, to assess levels of oxidative stress in physiological systems. The urine samples were acetonitrile-deproteinized, then derivatized by ethylchloroformate, and N(O,S)-ethoxycarbonyl ethyl esters of amino acids were analysed by isotope dilution gas chromatography/mass spectrometry. Recovery averaged 89%. Linearity was excellent (r = 0.998-0.999) in the 0.5-25 micromol/L range for CML and CEL. The limit of detection of this assay was 0.1 micromol/L (corresponding to 0.20 pmol of CML or CEL on column). Intra-day and inter-day precisions were likewise excellent, with relative standard deviations <4.63 and <6.15%, respectively. Accuracy of CML and CEL determination (15 micromol/L) was 2.9 and 5.9% of the estimated theoretical value. The time from obtaining the urine sample to determination of the concentration from the chromatographic peak was 80 min or less. This method is sensitive, reproducible, accurate, relatively cheap and very simple. It can be useful for laboratories involved in the diagnosis and monitoring of age-related chronic diseases.     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

Accurate mass measurements by Fourier transform mass spectrometry in the study of advanced glycation end products/peptides

The Maillard reaction occurring between sugars and amino groups is important in living systems. When amino groups belonging to protein chains are involved, the Maillard reaction has been invoked as responsible for protein cross-linking and the production of 'toxic' compounds. The reaction leads to the production of a heterogeneous group of substances, usually called advanced glycation end products (AGEs). Classical analytical approaches, such as spectroscopic (ultraviolet, fluorescence) and mass spectrometric (matrix-assisted laser desorption/ionization, liquid chromatography/electrospray ionization mass spectrometry) methods, have shown that the digestion mixture is highly complex. However, there are clear differences between the digestion mixtures of glycated and unglycated human serum albumin (HSA). In the former case, possible glycated peptides belonging to the AGE peptide class may be identified. Tandem mass spectrometric experiments on selected species seemed to be promising as regards structural information, but it was thought of interest to undertake the present investigation, based on liquid chromatography/electrospray ionization Fourier transform mass spectrometry, in order to obtain definitive results on their elemental composition. Using this approach, about 20 glycated peptides were detected and their possible structures were postulated by examining the known sequence of HSA.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Advanced statistical evaluation of the complex formation constants from electrophoretic data II: Diastereomeric ion-pairs of (R,S)-N-(3,5-dinitrobenzoyl)leucine and tert-butylcarbamoylquinine

Intermolecular association and ion-pair formation, respectively, between a cationic chiral selector, viz. o-9-(tert-butylcarbamoyl) quinine (CQN), and the both enantiomers of anionic N-(3,5-dinitrobenzoyl)leucine, (R)-DNB-Leu and (S)-DNB-Leu, were investigated by affinity capillary electrophoresis (ACE). Thus, binding constants of the both diastereomeric ion-pairs, (R) and (S)-DNB-Leu/CQN associates, were determined by different experimental setups and correction of nonlinear effects. A reciprocal setup was employed for the high-affinity (S)-enantiomer, and the experimental mobility data obtained for CQN at variable (S)-DNB-Leu concentrations in the background electrolyte were linearized and evaluated by advanced statistical model. A binding constant of K_S=125.1 l mol⁻¹ was afforded. The constant for the (R)-enantiomer, which is outside the range suitable for direct affinity CE, was obtained from indirect affinity CE utilizing the separation of the DNB-Leu racemate at a single appropriate CQN concentration in the BGE (resolution method) taking advantage of the known constant for the (S)-enantiomer yielding a binding constant of K_R=2.51 l mol⁻¹. Thereby, the so-called “constant time method” was adopted for the required precise measurement of the effective mobilities of the both enantiomers. A combined approach of reciprocal affinity CE with racemic DNB-Leu as additive and the resolution method confirmed the results. The resulting constants evidence excellent enantioselectivity of the tert-butylcarbamoyl derivative of the cinchona alkaloid quinine as chiral selector for N-(3,5-dinitrobenzoyl) derivatives of amino acids.