Modulated Pulse Generations in a Laser-diode-pumped Passively Q-switched Intracavity-frequency-doubling Nd∶YVO4 Laser

The investigative results of modulated pulse output from an LD end-pumped passively Q-switched intracavity-frequency-doubling Nd∶YVO4/KTP laser with Cr4+∶YAG saturable absorber are presented. The numerical stimulations of these modulated pulses are carried out basing on the rate equations. It indicated that the modulations are attribute to the frequency beating of two eigenstates of the resonant polarized modes. The theoretical calculations are in good agreement with the experimental observations.     

Design and performance analysis of beam steering birefringent mercurous chloride acousto-optic device

I.IntroductionThepcrformanccsofAcousto-optic(AO)dcviccareoftenlimitcdbythepropertiesofAOmcdiawhenitisusedinAOsigna1processingsystems.Thespectrumanalyzersandcorre1ationreceivers,forinstancc,areexpcctcdtoimprovcthereso1utionanddynamicrangcwhilereducingtheproccssorvolume.Rccent1y,ancwclassofmateria1s,themercurousha1ides,promiscstocontributeimportantsolutionstosuchnccdsandisrefincdtopractica1uti1izations.Themecurousha1ideweconsidcrinthispapcrismecurouschloride(Hg,C1,).Thesing1ecrystalofHg,Cl…     

Active Q-switching of the Alexandrite laser

An alexandrite-laser rod was actively Q-switched in the transversal fundamental mode at λ = 758 nm with an double crystal KD^*P Pockels cell. Pulse width, pulse energy and optical pulse delay (the build-up time of the photon field in the resonator) were measured as functions of pumping energy, rod temperature and reflectivity of the output coupling mirror. As the laser gain of alexandrite strongly depends on temperature, the pulse width and pulse energy were also investigated as functions of the temperature of the active material. A comparison of experimental data with theory was made.     

激光二极管泵浦的高重复频率Nd：YAG激光器

报道两个１．５Ｗ连续激光二极管端面泵浦的声光调ＱＮｄ：ＹＡＧ激光器，输出激光脉冲的最高重复频率为３０ｋＨｚ重复频率１ｋＨｚ时，最窄脉宽为１２ｎｓ，最高峰值功率为１２．１ｋＷ。     

Møller-Plesset (MP2) perturbation theory for large molecules

Summary A novel formulation of MP2 theory is presented which starts from the Laplace transform MP2 ansatz, and subsequently moves from a molecular orbital (MO) representation to an atomic orbital (AO) representation. Consequently, the new formulation is denoted AO-MP2. As in traditional MP2 approaches electron repulsion integrals still need to be transformed. Strict bounds on the individual MP2 energy contribution of each intermediate four-index quantity allow to screen off numerically insignificant integrals with a single threshold parameter. Implicit in our formulation is a bound to two-particle density matrix elements. For small molecules the computational cost for AO-MP2 calculations is about a factor of 100 higher than for traditional MO-based approaches, but due to screening the computational effort in larger systems will only grow with the fourth power of the size of the system (or less) as is demonstrated both in theory and in application. MP2 calculations on (non-metallic) crystalline systems seem to be a feasible extension of the Laplace transform approach. In large molecules the AO-MP2 ansatz allows massively parallel MP2 calculations without input/output of four-index quantities provided that each processor has in-core memory for a limited number of two-index quantities. Energy gradient formulas for the AO-MP2 approach are derived.Dedicated to Prof. W. Kutzelnigg whose books on theoretical chemistry aroused my interest in this field     

Effects of atomic oxygen irradiation on structural and tribological properties of polyimide/Al2O3 composites

To understand the effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polymer composites, polyimide/Al₂O₃ composites were irradiated with AO in a ground‐based simulation facility. The structural changes were characterized by X‐ray photoelectron spectroscopy and attenuated total‐reflection FTIR, whereas the tribological changes were evaluated by friction and wear tests as well as scanning electron microscopy analysis of the worn surfaces. It was found that AO irradiation induced the oxidation and degradation of polyimide molecular chains, which increased the O concentration and decreased the C concentration in the composite surfaces. The destruction action of AO changed the surface chemical structure and morphology of the samples. Friction and wear tests indicated that AO irradiation decreased the friction coefficient but increased the wear rate of both pure and Al₂O₃ filled polyimides. In terms of the tribological properties, appropriate content of Al₂O₃ might be favorable for the improvement of tribological properties in AO environment. Copyright © 2011 John Wiley & Sons, Ltd.     

腔内倍频调Q激光器中脉冲光场的时间不稳定性研究

以腔内倍频调Q激光器工作原理为基础,研究了多种形式抽运光分布的情况下倍频光的脉冲形状以及脉冲持续过程中光场分布的时间不稳定性,分析了倍频光光束质量随时间的变化规律.发现腔内倍频调Q激光器输出的倍频光光场分布在脉冲的持续过程中并不稳定,呈持续变化.对高斯型抽运的情况研究发现,减小腔长会使脉冲光场分布的不稳定性减小;而增加...     

Nearly Vertical Hopf Bifurcation for a Passively Q-Switched Microchip Laser

Passively Q-switched microchip lasers generate strongly pulsating intensity oscillations that emerge from a Hopf bifurcation point. We show that this bifurcation is nearly vertical and explain why strongly pulsating oscillations are immediately observed as we pass the Hopf bifurcation point. The laser dynamical problem is mathematically a singular perturbation problem which we investigate. The leading order problem is conservative and corresponds to Lotka–Volterra equations.     

Surface molecular degradation of 3D glass polymer composite under low earth orbit simulated space environment

Epoxy resin reinforced with 3D parabeam glass fibre was subjected to low earth orbit (LEO) simulation conditions comprising ultra high vacuum, temperature cycling (TC), and ultraviolet (UV) radiation and atomic oxygen (AO) bombardment. Inspection of the same composite using only a selection of these hazardous conditions provided comparison measures to identify the effect of each condition on the surface degradation of the resin composite. Each of the individually selected conditions showed a different degradation mechanism that is accelerated by the presence of other conditions. X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and scanning electron microscopy (SEM) were used to provide surface information. The resin composite samples suffered surface oxidation that increased the oxygen content to 17.24% in comparison with the untreated sample (only 14.2%). The samples that were treated with AO showed higher C-O and CO functional groups on the surface in comparison with the rest of the samples (as indicated by XPS). Molecular information (from ToF-SIMS) showed that surface oxidation differs with different conditions and in comparison with the use of all conditions. All treated samples were shown to suffer significant chain scission and loss of volatiles as a result of the LEO conditions. The extent of the chain scission reaction for each condition can be indicated by the extent of the reduction of the relative concentration of the aliphatic hydrocarbon ions. The relative intensity of the C₄H₁₁N₄O₂⁺ ion showed that AO bombardment accelerated the oxidation of the surface. The AO effect is doubled when UV and TC are also present. SEM results indicated that sample surfaces were eroded and roughened upon exposure to LEO conditions. Presence of AO and UV in the LEO conditions introduced white deposits onto the surface, believed to be crosslinked formations.     

二极管激光侧面泵浦腔内倍频Nd：YAG板条激光器研究

用准连续６０Ｗ的二极管激光列阵侧面泵浦“之”字形Ｎｄ：ＹＡＧ板条激光器，当泵浦功率为４５Ｗ，脉宽为４００μｓ时，得到３．５ｍＪ的激光输出。用ＫＤ＊Ｐ电光开关调Ｑ，得到１８ｎｓ（ＦＷＨＭ）、２ｍＪ的脉冲激光输出，用ＫＴＰ晶体作腔内倍频，得到１５ｎｓ、０．８５ｍＪ的二次谐波激光输出。在腔内无调Ｑ元件且腔长小于５ｃｍ时，于近阈值处得到单频绿光输出，而当泵浦功率稍大，腔内有数个纵模振荡时，观察到激光的反相态，并用数值模拟的结果对此作了解释。