ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Lifetime prediction of ABS polymers based on thermoanalytical data

The service life of ABS polymer, stabilized by 2-(3,5-di-tert-butyl-4-hydroxyanilino)-4,6-bis(octylthio)-1,3,5-triazine and containing 50% of a modifying rubber component, was estimated from oxidative induction times measured by DSC in isothermal mode in the temperature interval 140–170°C. The lifetime of ABS powder at the actual temperature of drying was predicted by linear extrapolation according to Arrhenius. However, the extrapolated value was much longer than the real lifetime determined from the long-term oven aging tests at 70 and 90°C, simulating the industrial drying process. The effect of changes in the apparent activation energy of oxidation due to antioxidant consumption during polymer aging is discussed.     

On solving sparse band systems with three algorithms of the ABS family

In this paper, we examine three algorithms in the ABS family and consider their storage requirements on sparse band systems. It is shown that, when using the implicit Cholesky algorithm on a band matrix with band width 2q+1, onlyq additional vectors are required. Indeed, for any matrix with upper band widthq, onlyq additional vectors are needed. More generally, ifa _kj 0,j>k, then thejth row ofH _i is effectively nonzero ifj>i>k. The arithmetic operations involved in solving a band matrix by this method are dominated by (1/2)n ² q. Special results are obtained forq-band tridiagonal matrices and cyclic band matrices.The implicit Cholesky algorithm may require pivoting if the matrixA does not possess positive-definite principal minors, so two further algorithms were considered that do not require this property. When using the implicit QR algorithm, a matrix with band widthq needs at most 2q additional vectors. Similar results forq-band tridiagonal matrices and cyclic band matrices are obtained.For the symmetric Huang algorithm, a matrix with band widthq requiresq–1 additional vectors. The storage required forq-band tridiagonal matrices and cyclic band matrices are again analyzed.This work was undertaken during the visit of Dr. J. Abaffy to Hatfield Polytechnic, sponsored by SERC Grant No. GR/E-07760.     

Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blends

A series of PB-g-SAN impact modifiers with different ratio of PB to SAN ranging from 20.6/79.4 to 91.9/8.1 were synthesized by seeded emulsion polymerization. ABS blends were prepared by blending these PB-g-SAN impact modifiers and SAN resin. The rubber concentration of these ABS blends was kept at a constant value of 15 wt%. The influences of different impact modifier on the mechanical behavior and morphology of ABS blends have been investigated. The dynamic mechanical analysis on ABS blends shows that T_g of the rubbery phase shifts to a lower temperature, (tan δ)_max of the rubbery phase increases and then decreases with the increase of PB concentration in PB-g-SAN impact modifier. A uniform dispersion of rubber particles in the matrix can be observed when PB/SAN ratio in PB-g-SAN impact modifier is in the range from 20.6/79.4 to 71.7/28.3. When it exceeds 71.7/28.3, an agglomeration of rubber particles occurs. The mechanical tests indicate that the ABS blend, in which PB/SAN ratio in the impact modifier is 71.7/28.3, has the maximum impact strength and yield strength.     

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

The application of an experimental approach based on the load separation criterion for the determination of the point of fracture initiation in a fracture test on a ductile polymer was critically examined. To this aim, the fracture process outlined by the application of this method was related to that described by the visual analysis of the fracture surfaces obtained in fracture tests on nominally identical specimens, in which different levels of crack extension were produced. The material examined was an acrylonitrile-butadiene-styrene (ABS) resin, and the fracture tests were performed at low loading rate on single-edge notched in bending specimens.The results demonstrated that this load separation criterion based methodology is a promising approach for the determination of the point of fracture initiation, and for material fracture resistance, J_Ic, evaluation. The method also has experimental simplicity and a high degree of repeatability.     

EMI shielding and dynamic mechanical analysis of graphene oxide-carbon nanotube-acrylonitrile butadiene styrene hybrid composites

Carbon nanomaterials such as carbon nanotubes (CNTs), graphene and their hybrid have been studied extensively. Despite having excellent properties of CNTs and graphene have not yet been fully realized in the polymer composites. During fabrication agglomeration of CNTs and restacking of graphene is a serious concern that results in the degradation of properties of nanomaterials into the final composites. To improve the dispersion of CNTs and restacking graphene, in the present research work, we focused on the hybridization of graphene oxide and CNTs. Multiwalled carbon nanotubes (MWCNTs), functionalized carbon nanotubes (FCNTs), and graphene oxide-carbon nanotubes (GCNTs) reinforced acrylonitrile butadiene styrene (ABS) composites were prepared separately by vacuum filtration followed by hot compression molding. Further, dynamic mechanical analysis (DMA), and electromagnetic interference (EMI) shielding properties of ABS composites reinforced carbon nanofillers were investigated. The dynamic mechanical properties of polymers strongly depend on the adhesion of fillers and polymer, entanglement density of polymer chains in the presence of carbon fillers. The dynamic mechanical characteristics such as storage, loss modulus, and damping factor of prepared composites were significantly affected by the incorporation of MWCNTs, FCNTs, and GCNTs. Maximum EMI shielding effectiveness of −49.6 dB was achieved for GCNT-ABS composites which were highest compared to MWCNTs-ABS composites (−38.6 dB) and FCNTs-ABS composites (−36.7 dB) in the Ku band (12.4–18 GHz). These results depict the great potential of GCNTs-ABS composites to be used in various applications of efficient heat dissipative EMI shielding materials for electronic devices.     

Chemically initiated graft copolymerization of acrylic acid onto acrylonitrile-butadiene-styrene (ABS) terpolymer and its constituent polymers

The graft copolymerization of acrylic acid onto acrylonitrile-butadiene-styrene terpolymer (ABS), has been initiated by the use of both benzoyl peroxide and azobisisobutyronitrile. Addition occurs in the butadiene region of the polymer, either by the loss of a vinylic hydrogen and subsequent radical formation and addition of monomer or by addition to the double bond. The amount of acrylic acid which may be added is dependent upon the time and temperature of the reaction and the concentration of monomer and initiator. Thermal analysis of the grafted samples show that the residue is less than that expected based upon the composition of the copolymer; similar results have been previously obtained for acrylic acid grafted by another technique. © 1996 John Wiley & Sons, Inc.     

苯乙烯-马来酸酐共聚物增容Nylon-6/ABS共混体系的形态和力学性能

通过熔融共混法制备了苯乙烯-马来酸酐共聚物(SMA)增容的尼龙6(Nylon-6)/ABS共混物.采用TEM、SEM、FTIR等研究了SMA增容的Nylon-6/ABS共混物的相形态与性能.发现在Nylon-6和ABS的简单共混体系中,分散相易聚集,相界面清晰,断裂面光滑,呈脆性断裂,相容性差.加入少量SMA后,共混物由共连续相结构转变为典型的"海-岛"结构,分散相分布均匀,界面粘接程度增加,表明SMA对Nylon-6/ABS体系有显著的增容效果.     

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

This work aims to determine the influence of fused deposition modeling (FDM) printing parameters on the mechanical properties of parts fabricated on an Ultimaker2 printer with acrylonitrile butadiene styrene (ABS). The effect of several parameters such as interlayer cooling time (ILCT), nozzle diameter, infill density, raster angle and layer thickness on the ultimate tensile strength, yield strength, and elastic modulus of produced parts was evaluated. Two independent studies were conducted: a first study dedicated to the ILCT and a second study where the influence of other parameters was evaluated through a design of experiments (DoE) approach. Both studies were carried out through the execution of standard tensile tests. The statistical analysis of tensile tests results was processed with the ANOVA methodology. The obtained results indicate that a reduced ILCT improves the tensile strength of parts. It is shown that nozzle diameter and infill density are the parameters that most influence the mechanical properties of ABS, with the upper range selected values improving the studied mechanical properties. The raster angle configuration of (?45^o/45^o) benefits UTS and yield strength of ABS samples. Interactions of nozzle diameter on layer thickness were detected. It was observed that smaller layer thickness promotes a higher elastic modulus and UTS; however, for thinner layers (0.06‐0.10 mm), no significant differences were found on strength of samples due to potential high distortion levels.     

烷基苯磺酸盐型表面活性剂的HPLC及HPCE分离分析进展*

作为一种常见的表面活性剂,烷基苯碘酸盐（ABS）被广泛用于许多领域。本文结合作者最近的研究结果,对烷基苯磺酸盐表面活性剂的HPLC及HPCE分离分析现状及其应用前景进行了综述。